[Tue Apr 10 21:05:45 2012] Detection parameters:
  Position = (319.8, 328.8) = 20 34 50.43 60 10 21.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.1 +/- 20.3
  Background counts = 74.1
  Rate = 0.006 +/- 0.0008

[Tue Apr 10 21:05:45 2012] Off-axis axis estimate = 2.69'
[Tue Apr 10 21:06:07 2012] Using EEF radius (= 7.78 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:06:07 2012] Initial guess for spatial extent in simple fitting = 7.78"
[Tue Apr 10 21:06:07 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.765
[Tue Apr 10 21:06:07 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 7.78"
[Tue Apr 10 21:06:08 2012] fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_src38.ximg exists
[Tue Apr 10 21:06:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_src38.csv
[Tue Apr 10 21:06:08 2012] fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_src38_1.ximg exists
[Tue Apr 10 21:06:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_src38.csv
[Tue Apr 10 21:06:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:06:09 2012] fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Tue Apr 10 21:06:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src38.csv
[Tue Apr 10 21:06:09 2012] fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Tue Apr 10 21:06:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src38.csv
[Tue Apr 10 21:06:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:06:20 2012] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 10.890500 pixels away
[Tue Apr 10 21:06:20 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:06:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:06:20 2012] Assessing source extent using major
[Tue Apr 10 21:06:20 2012] Source does appear to be extended
[Tue Apr 10 21:06:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:06:38 2012] Using EEF radius (= 7.78 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:06:38 2012] Initial guess for spatial extent in simple fitting = 7.78"
[Tue Apr 10 21:06:38 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.765
[Tue Apr 10 21:06:38 2012] Giving source the simple spatial ID 38 for pass 1, mean size = 7.78"
[Tue Apr 10 21:06:39 2012] fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_src38.ximg exists
[Tue Apr 10 21:06:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_src38.csv
[Tue Apr 10 21:06:39 2012] fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_src38_1.ximg exists
[Tue Apr 10 21:06:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_src38.csv
[Tue Apr 10 21:06:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:06:39 2012] fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Tue Apr 10 21:06:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src38.csv
[Tue Apr 10 21:06:39 2012] fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Tue Apr 10 21:06:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src38.csv
[Tue Apr 10 21:06:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:06:49 2012] Source 38 is offset by 4.976965 and -8.353702 pixels which is larger than
2 X fitted extent = 5.185885 x 5.185885, not incorporating fit results
[Tue Apr 10 21:06:49 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:06:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:06:49 2012] Assessing source extent using major
[Tue Apr 10 21:06:49 2012] Source does appear to be extended
[Tue Apr 10 21:06:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:07:07 2012] XMMSAS src. selection expression = ellipse(27777.369934, 28556.729889, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Apr 10 21:07:07 2012] Not overwriting source region fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src38_src.reg
[Tue Apr 10 21:07:07 2012] Extracting stamp from image fullrun_pn_xmm0500730201_pi300-10000_cl_sm2.00.img.gz, (282, 291) - (357, 366)
[Tue Apr 10 21:07:07 2012] XMMSAS bgd. selection expression = annulus(27777.369934, 28556.729889, 1087.500000, 2175.000000, X, Y) && !ellipse(27484.677600, 27172.583600, 453.442413, 453.442413, 0.000000, X, Y) && !ellipse(26323.593340, 27090.811000, 417.232012, 417.232012, 0.000000, X, Y) && !ellipse(26242.824066, 29888.423553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26176.928894, 28172.002869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29859.478424, 27714.857269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26687.939728, 27881.380707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26849.372000, 26415.692000, 371.750411, 371.750411, 0.000000, X, Y) && !ellipse(28068.573180, 25971.048600, 428.812812, 428.812812, 0.000000, X, Y) && !ellipse(27963.993268, 30873.425000, 356.573610, 356.573610, 0.000000, X, Y) && !ellipse(28188.628662, 27502.561127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30168.295502, 28797.997711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29751.193054, 27875.048462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29352.999725, 26197.526611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27251.063477, 25975.499786, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Apr 10 21:07:07 2012] Writing fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src38.gif
[Tue Apr 10 21:07:13 2012] ../../xmm0500730201/products/events/fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src38_src.evt and ../../xmm0500730201/products/events/fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src38_bgd.evt exist, delete to re-create
[Tue Apr 10 21:07:13 2012] Mean detx,y = (-72.86, -1621.62) 
[Tue Apr 10 21:07:13 2012] ../../xmm0500730201/products/images/fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src38_src.img and ../../xmm0500730201/products/images/fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src38_bgd.img exist, delete to re-create
[Tue Apr 10 21:07:13 2012] ../../xmm0500730201/products/spectra/fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src38_src_b10.pi.gz and ../../xmm0500730201/products/spectra/fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src38_bgd.pi exist, delete to re-create
[Tue Apr 10 21:07:13 2012] Setting source spectrum file to fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Tue Apr 10 21:07:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Tue Apr 10 21:07:13 2012] ../../xmm0500730201/products/lightcurves/fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src38_src.lc and ../../xmm0500730201/products/lightcurves/fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src38_bgd.lc exist, delete to re-create
[Tue Apr 10 21:07:18 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Apr 10 21:07:18 2012] rmf not generated due to insufficient counts
[Tue Apr 10 21:07:18 2012] fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src38.arf exists, delete to re-create
[Tue Apr 10 21:08:00 2012] Updating aperture counts using extracted products
[Tue Apr 10 21:08:00 2012] Error reading totcts from fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Tue Apr 10 21:08:00 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 21:08:00 2012] Using photon index=1.80, rate=0.00596, arf fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src38.arf
[Tue Apr 10 21:08:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 21:08:00 2012] Updating source flux to 1.6e-14
[Tue Apr 10 21:08:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting