[Tue Apr 10 21:05:45 2012] Detection parameters:
  Position = (363.8, 332.8) = 20 34 24.77 60 10 38.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108.9 +/- 14.9
  Background counts = 62.4
  Rate = 0.005 +/- 0.0007

[Tue Apr 10 21:05:45 2012] Off-axis axis estimate = 5.36'
[Tue Apr 10 21:06:07 2012] Using EEF radius (= 9.11 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:06:07 2012] Initial guess for spatial extent in simple fitting = 9.11"
[Tue Apr 10 21:06:07 2012] source mask rpix=2.1, npix_max = 26, mask sum = 15, frac = 0.558
[Tue Apr 10 21:06:07 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 9.11"
[Tue Apr 10 21:06:08 2012] fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_src36.ximg exists
[Tue Apr 10 21:06:08 2012] fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_src36_1.ximg exists
[Tue Apr 10 21:06:08 2012] Fit fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_src36 appears to have run properly
[Tue Apr 10 21:06:09 2012] fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Tue Apr 10 21:06:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src36.csv
[Tue Apr 10 21:06:09 2012] fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Tue Apr 10 21:06:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src36.csv
[Tue Apr 10 21:06:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:06:20 2012] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 13.678104 pixels away
[Tue Apr 10 21:06:20 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:06:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:06:20 2012] Assessing source extent using major
[Tue Apr 10 21:06:20 2012] Source does appear to be extended
[Tue Apr 10 21:06:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:06:38 2012] Using EEF radius (= 9.11 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:06:38 2012] Initial guess for spatial extent in simple fitting = 9.11"
[Tue Apr 10 21:06:38 2012] source mask rpix=2.1, npix_max = 26, mask sum = 15, frac = 0.558
[Tue Apr 10 21:06:38 2012] Giving source the simple spatial ID 36 for pass 1, mean size = 9.11"
[Tue Apr 10 21:06:39 2012] fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_src36.ximg exists
[Tue Apr 10 21:06:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_src36.csv
[Tue Apr 10 21:06:39 2012] fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_src36_1.ximg exists
[Tue Apr 10 21:06:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_src36.csv
[Tue Apr 10 21:06:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:06:39 2012] fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Tue Apr 10 21:06:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src36.csv
[Tue Apr 10 21:06:39 2012] fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Tue Apr 10 21:06:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src36.csv
[Tue Apr 10 21:06:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:06:49 2012] Spatial fit model total counts = 749.778000, observed total counts = 488.000000
[Tue Apr 10 21:06:49 2012] Poor agreement between spatial fit and data for source 36
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Apr 10 21:06:49 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:06:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:06:49 2012] Assessing source extent using major
[Tue Apr 10 21:06:49 2012] Source does appear to be extended
[Tue Apr 10 21:06:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:07:07 2012] XMMSAS src. selection expression = ellipse(31604.724762, 28906.877808, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Apr 10 21:07:07 2012] Not overwriting source region fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src36_src.reg
[Tue Apr 10 21:07:07 2012] Extracting stamp from image fullrun_pn_xmm0500730201_pi300-10000_cl_sm2.00.img.gz, (326, 295) - (401, 370)
[Tue Apr 10 21:07:07 2012] XMMSAS bgd. selection expression = annulus(31604.724762, 28906.877808, 1087.500000, 2175.000000, X, Y) && !ellipse(29859.478424, 27714.857269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31452.610168, 27249.778442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30168.295502, 28797.997711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32366.250200, 28260.381800, 460.584813, 460.584813, 0.000000, X, Y) && !ellipse(29751.193054, 27875.048462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29352.999725, 26197.526611, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Apr 10 21:07:07 2012] Writing fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src36.gif
[Tue Apr 10 21:07:13 2012] ../../xmm0500730201/products/events/fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src36_src.evt and ../../xmm0500730201/products/events/fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src36_bgd.evt exist, delete to re-create
[Tue Apr 10 21:07:13 2012] Mean detx,y = (3636.58, -3033.57) 
[Tue Apr 10 21:07:13 2012] ../../xmm0500730201/products/images/fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src36_src.img and ../../xmm0500730201/products/images/fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src36_bgd.img exist, delete to re-create
[Tue Apr 10 21:07:13 2012] ../../xmm0500730201/products/spectra/fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src36_src_b10.pi.gz and ../../xmm0500730201/products/spectra/fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src36_bgd.pi exist, delete to re-create
[Tue Apr 10 21:07:13 2012] Setting source spectrum file to fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Tue Apr 10 21:07:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Tue Apr 10 21:07:13 2012] ../../xmm0500730201/products/lightcurves/fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src36_src.lc and ../../xmm0500730201/products/lightcurves/fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src36_bgd.lc exist, delete to re-create
[Tue Apr 10 21:07:18 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Apr 10 21:07:18 2012] rmf not generated due to insufficient counts
[Tue Apr 10 21:07:18 2012] fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src36.arf exists, delete to re-create
[Tue Apr 10 21:08:00 2012] Updating aperture counts using extracted products
[Tue Apr 10 21:08:00 2012] Error reading totcts from fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Tue Apr 10 21:08:00 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 21:08:00 2012] Using photon index=1.80, rate=0.00496, arf fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src36.arf
[Tue Apr 10 21:08:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 21:08:00 2012] Updating source flux to 2.1e-14
[Tue Apr 10 21:08:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting