[Tue Apr 10 21:05:45 2012] Detection parameters:
  Position = (323.3, 299.1) = 20 34 48.41 60 8 11.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 370.3 +/- 27.5
  Background counts = 72.0
  Rate = 0.01 +/- 0.001

[Tue Apr 10 21:05:45 2012] Off-axis axis estimate = 1.81'
[Tue Apr 10 21:06:07 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:06:07 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Tue Apr 10 21:06:07 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.047
[Tue Apr 10 21:06:07 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 7.33"
[Tue Apr 10 21:06:08 2012] fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_src19.ximg exists
[Tue Apr 10 21:06:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_src19.csv
[Tue Apr 10 21:06:08 2012] fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue Apr 10 21:06:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_src19.csv
[Tue Apr 10 21:06:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:06:09 2012] fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue Apr 10 21:06:09 2012] fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue Apr 10 21:06:09 2012] Fit fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Tue Apr 10 21:06:19 2012] Spatial fit model total counts = 1204.410000, observed total counts = 1203.000000
[Tue Apr 10 21:06:19 2012] Offset between fit and detection position for source 19 = 0.134269 pixels
[Tue Apr 10 21:06:19 2012] 1200.077000 total counts/ 995.218000 bgd. counts: snr = 6.493756
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.134269 pixels
  Position = (323.2, 299.1) = 20 34 48.49 60 8 11.3
  Extent = 5.2 (4.6-6.0)", rotation angle = 0
  Source counts = 204.9 +/- 34.6
  Background counts = 995.2
  Rate = 0.006 +/- 0.001
[Tue Apr 10 21:06:20 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:06:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:06:20 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 21:06:20 2012] Source does appear to be extended
[Tue Apr 10 21:06:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:06:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:06:38 2012] Initial guess for spatial extent in simple fitting = 5.23"
[Tue Apr 10 21:06:38 2012] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.379
[Tue Apr 10 21:06:38 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 5.23"
[Tue Apr 10 21:06:39 2012] fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_src19.ximg exists
[Tue Apr 10 21:06:39 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_src19.csv
[Tue Apr 10 21:06:39 2012] fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_src19_1.ximg exists
[Tue Apr 10 21:06:39 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_src19.csv
[Tue Apr 10 21:06:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:06:39 2012] fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Tue Apr 10 21:06:39 2012] fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Tue Apr 10 21:06:39 2012] Fit fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Tue Apr 10 21:06:49 2012] Spatial fit model total counts = 1205.110000, observed total counts = 1203.000000
[Tue Apr 10 21:06:49 2012] Offset between fit and detection position for source 19 = 0.021760 pixels
[Tue Apr 10 21:06:49 2012] 1175.826000 total counts/ 966.395000 bgd. counts: snr = 6.736955
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.021760 pixels
  Position = (323.2, 299.1) = 20 34 48.50 60 8 11.3
  Extent = 5.4 (4.5-6.2)", rotation angle = 0
  Source counts = 209.4 +/- 34.3
  Background counts = 966.4
  Rate = 0.007 +/- 0.001
[Tue Apr 10 21:06:49 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:06:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:06:49 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 21:06:49 2012] Source does appear to be extended
[Tue Apr 10 21:06:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:07:07 2012] XMMSAS src. selection expression = ellipse(28068.573180, 25971.048600, 321.609609, 321.609609, 0.000000, X, Y)
[Tue Apr 10 21:07:07 2012] Not overwriting source region fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src19_src.reg
[Tue Apr 10 21:07:07 2012] Extracting stamp from image fullrun_pn_xmm0500730201_pi300-10000_cl_sm2.00.img.gz, (305, 281) - (342, 318)
[Tue Apr 10 21:07:07 2012] XMMSAS bgd. selection expression = annulus(28068.573180, 25971.048600, 536.016015, 1072.032031, X, Y) && !ellipse(27484.677600, 27172.583600, 453.442413, 453.442413, 0.000000, X, Y) && !ellipse(29859.478424, 27714.857269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26687.939728, 27881.380707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26849.372000, 26415.692000, 371.750411, 371.750411, 0.000000, X, Y) && !ellipse(28188.628662, 27502.561127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29751.193054, 27875.048462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29352.999725, 26197.526611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27251.063477, 25975.499786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27204.930000, 25082.966000, 1152.792033, 1152.792033, 0.000000, X, Y)
[Tue Apr 10 21:07:07 2012] Writing fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src19.gif
[Tue Apr 10 21:07:10 2012] ../../xmm0500730201/products/events/fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src19_src.evt and ../../xmm0500730201/products/events/fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src19_bgd.evt exist, delete to re-create
[Tue Apr 10 21:07:11 2012] Mean detx,y = (973.80, 793.84) 
[Tue Apr 10 21:07:11 2012] ../../xmm0500730201/products/images/fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src19_src.img and ../../xmm0500730201/products/images/fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src19_bgd.img exist, delete to re-create
[Tue Apr 10 21:07:11 2012] ../../xmm0500730201/products/spectra/fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src19_src_b10.pi.gz and ../../xmm0500730201/products/spectra/fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src19_bgd.pi exist, delete to re-create
[Tue Apr 10 21:07:11 2012] Setting source spectrum file to fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Tue Apr 10 21:07:11 2012] Setting bgd. spectrum file to fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Tue Apr 10 21:07:11 2012] ../../xmm0500730201/products/lightcurves/fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src19_src.lc and ../../xmm0500730201/products/lightcurves/fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src19_bgd.lc exist, delete to re-create
[Tue Apr 10 21:07:18 2012] fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src19.rmf exists, delete to re-create
[Tue Apr 10 21:07:18 2012] fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src19.arf exists, delete to re-create
[Tue Apr 10 21:07:59 2012] Updating aperture counts using extracted products
[Tue Apr 10 21:07:59 2012] Error reading totcts from fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Tue Apr 10 21:08:00 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 21:08:00 2012] Using photon index=1.80, rate=0.00664, arf fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src19.arf
[Tue Apr 10 21:08:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 21:08:00 2012] Updating source flux to 2e-14