[Tue Apr 10 21:05:47 2012] Detection parameters:
  Position = (326.3, 223.4) = 20 34 46.71 60 2 42.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.9 +/- 9.6
  Background counts = 19.1
  Rate = 0.002 +/- 0.0004

[Tue Apr 10 21:05:47 2012] Off-axis axis estimate = 5.80'
[Tue Apr 10 21:06:10 2012] Using EEF radius (= 9.33 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:06:10 2012] Initial guess for spatial extent in simple fitting = 9.33"
[Tue Apr 10 21:06:10 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.893
[Tue Apr 10 21:06:10 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 9.33"
[Tue Apr 10 21:06:11 2012] fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_src26.ximg exists
[Tue Apr 10 21:06:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_src26.csv
[Tue Apr 10 21:06:11 2012] fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_src26_1.ximg exists
[Tue Apr 10 21:06:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_src26.csv
[Tue Apr 10 21:06:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:06:11 2012] fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Tue Apr 10 21:06:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src26.csv
[Tue Apr 10 21:06:11 2012] fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Tue Apr 10 21:06:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src26.csv
[Tue Apr 10 21:06:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:06:27 2012] Source 30 is offset by 8.903873 and 0.086831 pixels which is larger than
2 X fitted extent = 1.072423 x 1.072423, not incorporating fit results
[Tue Apr 10 21:06:27 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:06:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:06:27 2012] Assessing source extent using major
[Tue Apr 10 21:06:27 2012] Source does appear to be extended
[Tue Apr 10 21:06:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:06:40 2012] Using EEF radius (= 9.33 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:06:40 2012] Initial guess for spatial extent in simple fitting = 9.33"
[Tue Apr 10 21:06:40 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.893
[Tue Apr 10 21:06:40 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 9.33"
[Tue Apr 10 21:06:41 2012] fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_src23.ximg exists
[Tue Apr 10 21:06:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_src23.csv
[Tue Apr 10 21:06:41 2012] fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_src23_1.ximg exists
[Tue Apr 10 21:06:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_src23.csv
[Tue Apr 10 21:06:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:06:41 2012] fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Tue Apr 10 21:06:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src23.csv
[Tue Apr 10 21:06:41 2012] fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Tue Apr 10 21:06:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src23.csv
[Tue Apr 10 21:06:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:06:56 2012] Source 30 is offset by -6.790794 and 4.922825 pixels which is larger than
2 X fitted extent = 0.923735 x 1.300859, not incorporating fit results
[Tue Apr 10 21:06:56 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:06:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:06:56 2012] Assessing source extent using major
[Tue Apr 10 21:06:56 2012] Source does appear to be extended
[Tue Apr 10 21:06:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:07:22 2012] XMMSAS src. selection expression = ellipse(28341.730927, 19388.248642, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Apr 10 21:07:22 2012] Not overwriting source region fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src30_src.reg
[Tue Apr 10 21:07:22 2012] Extracting stamp from image fullrun_mos2_xmm0500730201_pi300-10000_cl_sm2.00.img.gz, (289, 186) - (364, 261)
[Tue Apr 10 21:07:22 2012] XMMSAS bgd. selection expression = annulus(28341.730927, 19388.248642, 1087.500000, 2175.000000, X, Y) && !ellipse(29553.979000, 21611.875600, 674.783219, 310.498409, 353.149258, X, Y)
[Tue Apr 10 21:07:22 2012] Writing fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src30.gif
[Tue Apr 10 21:07:23 2012] ../../xmm0500730201/products/events/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src30_src.evt and ../../xmm0500730201/products/events/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src30_bgd.evt exist, delete to re-create
[Tue Apr 10 21:07:23 2012] Mean detx,y = (-3031.57, -7222.39) 
[Tue Apr 10 21:07:23 2012] ../../xmm0500730201/products/images/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src30_src.img and ../../xmm0500730201/products/images/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src30_bgd.img exist, delete to re-create
[Tue Apr 10 21:07:23 2012] ../../xmm0500730201/products/spectra/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src30_src_b10.pi.gz and ../../xmm0500730201/products/spectra/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src30_bgd.pi exist, delete to re-create
[Tue Apr 10 21:07:23 2012] Setting source spectrum file to fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Tue Apr 10 21:07:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Tue Apr 10 21:07:23 2012] ../../xmm0500730201/products/lightcurves/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src30_src.lc and ../../xmm0500730201/products/lightcurves/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src30_bgd.lc exist, delete to re-create
[Tue Apr 10 21:07:24 2012] Not generating rmf since there are only 47 counts
[Tue Apr 10 21:07:24 2012] rmf not generated due to insufficient counts
[Tue Apr 10 21:07:24 2012] fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src30.arf exists, delete to re-create
[Tue Apr 10 21:08:01 2012] Updating aperture counts using extracted products
[Tue Apr 10 21:08:01 2012] Error reading totcts from fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Tue Apr 10 21:08:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 21:08:02 2012] Using photon index=1.80, rate=0.00184, arf fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src30.arf
[Tue Apr 10 21:08:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 21:08:02 2012] Updating source flux to 2.8e-14
[Tue Apr 10 21:08:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting