[Tue Apr 10 21:05:46 2012] Detection parameters:
  Position = (302.1, 344.9) = 20 35 0.76 60 11 30.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3302.4 +/- 68.5
  Background counts = 30.5
  Rate = 0.1 +/- 0.002

[Tue Apr 10 21:05:47 2012] Off-axis axis estimate = 3.38'
[Tue Apr 10 21:06:10 2012] Using EEF radius (= 8.12 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:06:10 2012] Initial guess for spatial extent in simple fitting = 8.12"
[Tue Apr 10 21:06:10 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.714
[Tue Apr 10 21:06:10 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.12"
[Tue Apr 10 21:06:10 2012] fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_src1.ximg exists
[Tue Apr 10 21:06:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_src1.csv
[Tue Apr 10 21:06:10 2012] fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Apr 10 21:06:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_src1.csv
[Tue Apr 10 21:06:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:06:11 2012] fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Apr 10 21:06:11 2012] fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Apr 10 21:06:11 2012] Fit fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Apr 10 21:06:27 2012] Spatial fit model total counts = 2964.070000, observed total counts = 3008.000000
[Tue Apr 10 21:06:27 2012] Offset between fit and detection position for source 3 = 0.234018 pixels
[Tue Apr 10 21:06:27 2012] 2940.312000 total counts/ 690.692000 bgd. counts: snr = 85.598657
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.234018 pixels
  Position = (301.9, 344.8) = 20 35 0.86 60 11 30.1
  Extent = 5.0 (4.8-5.2)", rotation angle = 0
  Source counts = 2249.6 +/- 54.2
  Background counts = 690.7
  Rate = 0.06 +/- 0.002
[Tue Apr 10 21:06:27 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:06:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:06:27 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 21:06:27 2012] Source does appear to be extended
[Tue Apr 10 21:06:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:06:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:06:40 2012] Initial guess for spatial extent in simple fitting = 5.02"
[Tue Apr 10 21:06:40 2012] source mask rpix=1.2, npix_max = 10, mask sum = 12, frac = 1.097
[Tue Apr 10 21:06:40 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.02"
[Tue Apr 10 21:06:41 2012] fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_src1.ximg exists
[Tue Apr 10 21:06:41 2012] fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Apr 10 21:06:41 2012] Fit fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Apr 10 21:06:41 2012] fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Apr 10 21:06:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Apr 10 21:06:41 2012] fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Apr 10 21:06:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Apr 10 21:06:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:06:56 2012] Spatial fit model total counts = 2981.030000, observed total counts = 3008.000000
[Tue Apr 10 21:06:56 2012] Offset between fit and detection position for source 3 = 0.004975 pixels
[Tue Apr 10 21:06:56 2012] 2957.550000 total counts/ 688.470000 bgd. counts: snr = 86.478331
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.004975 pixels
  Position = (301.9, 344.8) = 20 35 0.86 60 11 30.1
  Extent = 5.3" x 4.8", rotation angle = 1
  Source counts = 2269.1 +/- 54.4
  Background counts = 688.5
  Rate = 0.07 +/- 0.002
[Tue Apr 10 21:06:56 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:06:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:06:56 2012] Assessing source extent using major
[Tue Apr 10 21:06:56 2012] Source does appear to be extended
[Tue Apr 10 21:06:56 2012] Computing asymmetry using major and minor axis, asym = 1.11
[Tue Apr 10 21:07:22 2012] Counts = 2269.080000, rescaling region sizes by 2.000000
[Tue Apr 10 21:07:22 2012] XMMSAS src. selection expression = ellipse(26220.863751, 29945.802411, 636.538070, 573.274432, 0.731405, X, Y)
[Tue Apr 10 21:07:22 2012] Not overwriting source region fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src3_src.reg
[Tue Apr 10 21:07:22 2012] Extracting stamp from image fullrun_mos2_xmm0500730201_pi300-10000_cl_sm2.00.img.gz, (265, 308) - (339, 381)
[Tue Apr 10 21:07:22 2012] XMMSAS bgd. selection expression = annulus(26220.863751, 29945.802411, 2121.793566, 4243.587132, X, Y) && !ellipse(26309.580920, 27091.531400, 429.468812, 347.255210, 14.060000, X, Y) && !ellipse(27473.344800, 27184.059800, 434.690413, 434.690413, 0.000000, X, Y) && !ellipse(29838.080800, 27543.036400, 399.620011, 399.620011, 0.000000, X, Y) && !ellipse(26207.388400, 28348.393000, 449.820013, 167.042405, 299.542000, X, Y) && !ellipse(23535.289920, 29272.222400, 349.772010, 349.772010, 0.000000, X, Y) && !ellipse(26694.596000, 27921.106000, 295.435209, 295.435209, 0.000000, X, Y) && !ellipse(28056.392899, 25963.416465, 532.073792, 326.769095, 99.886459, X, Y) && !ellipse(26877.835388, 26387.892212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24710.765961, 33759.419098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27964.300000, 30897.042800, 333.682410, 333.682410, 0.000000, X, Y) && !ellipse(26594.012756, 33337.983643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24402.662500, 25174.332520, 753.355222, 753.355222, 0.000000, X, Y)
[Tue Apr 10 21:07:22 2012] Writing fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src3.gif
[Tue Apr 10 21:07:22 2012] ../../xmm0500730201/products/events/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0500730201/products/events/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Tue Apr 10 21:07:22 2012] Mean detx,y = (2116.39, 2297.19) 
[Tue Apr 10 21:07:22 2012] ../../xmm0500730201/products/images/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src3_src.img and ../../xmm0500730201/products/images/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Tue Apr 10 21:07:22 2012] ../../xmm0500730201/products/spectra/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0500730201/products/spectra/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Tue Apr 10 21:07:22 2012] Setting source spectrum file to fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Apr 10 21:07:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Apr 10 21:07:22 2012] ../../xmm0500730201/products/lightcurves/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0500730201/products/lightcurves/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Tue Apr 10 21:07:24 2012] fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src3.rmf exists, delete to re-create
[Tue Apr 10 21:07:24 2012] fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src3.arf exists, delete to re-create
[Tue Apr 10 21:08:01 2012] Updating aperture counts using extracted products
[Tue Apr 10 21:08:01 2012] Error reading totcts from fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Apr 10 21:08:01 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 21:08:01 2012] Using photon index=1.80, rate=0.0654, arf fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src3.arf
[Tue Apr 10 21:08:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 21:08:01 2012] Updating source flux to 8.5e-13
[Tue Apr 10 21:08:06 2012] Reading fit data from xmm0500730201/analysis//spectral/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src3_pl.csv
[Tue Apr 10 21:08:06 2012] Spectral fit parameter nH value = 2.31705e+21
[Tue Apr 10 21:08:06 2012] Spectral fit parameter PhoIndex value = 2.63567
[Tue Apr 10 21:08:06 2012] Failed to get F(0.3-8.0) from xmm0500730201/analysis//spectral/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Tue Apr 10 21:08:06 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 21:08:06 2012] Using Nh = 2.3e+21, photon index=2.64, rate=0.0654, arf fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src3.arf
[Tue Apr 10 21:08:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 21:08:06 2012] Updating source flux to 7.2e-13