[Tue Apr 10 21:05:47 2012] Detection parameters:
  Position = (323.1, 298.9) = 20 34 48.57 60 8 10.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 131.8 +/- 15.5
  Background counts = 30.7
  Rate = 0.004 +/- 0.0005

[Tue Apr 10 21:05:47 2012] Off-axis axis estimate = 1.79'
[Tue Apr 10 21:06:10 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:06:10 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Tue Apr 10 21:06:10 2012] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.630
[Tue Apr 10 21:06:10 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 7.32"
[Tue Apr 10 21:06:11 2012] fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_src13.ximg exists
[Tue Apr 10 21:06:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_src13.csv
[Tue Apr 10 21:06:11 2012] fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_src13_1.ximg exists
[Tue Apr 10 21:06:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_src13.csv
[Tue Apr 10 21:06:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:06:11 2012] fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Tue Apr 10 21:06:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src13.csv
[Tue Apr 10 21:06:11 2012] fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Tue Apr 10 21:06:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src13.csv
[Tue Apr 10 21:06:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:06:27 2012] Spatial fit model total counts = 459.049000, observed total counts = 412.000000
[Tue Apr 10 21:06:27 2012] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Apr 10 21:06:27 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:06:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:06:27 2012] Assessing source extent using major
[Tue Apr 10 21:06:27 2012] Source does appear to be extended
[Tue Apr 10 21:06:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:06:40 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:06:40 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Tue Apr 10 21:06:40 2012] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.630
[Tue Apr 10 21:06:40 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 7.32"
[Tue Apr 10 21:06:41 2012] fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_src12.ximg exists
[Tue Apr 10 21:06:41 2012] fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_src12_1.ximg exists
[Tue Apr 10 21:06:41 2012] Fit fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_src12 appears to have run properly
[Tue Apr 10 21:06:41 2012] fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Tue Apr 10 21:06:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src12.csv
[Tue Apr 10 21:06:41 2012] fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Tue Apr 10 21:06:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src12.csv
[Tue Apr 10 21:06:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:06:56 2012] Spatial fit model total counts = 430.259000, observed total counts = 412.000000
[Tue Apr 10 21:06:56 2012] Offset between fit and detection position for source 18 = 0.132629 pixels
[Tue Apr 10 21:06:56 2012] 429.436000 total counts/ 368.421000 bgd. counts: snr = 3.178809
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.132629 pixels
  Position = (323.0, 299.0) = 20 34 48.58 60 8 10.9
  Extent = 6.7" x 4.1", rotation angle = 100
  Source counts = 61.0 +/- 20.7
  Background counts = 368.4
  Rate = 0.002 +/- 0.0006
[Tue Apr 10 21:06:56 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:06:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:06:56 2012] Assessing source extent using major
[Tue Apr 10 21:06:56 2012] Source does appear to be extended
[Tue Apr 10 21:06:56 2012] Computing asymmetry using major and minor axis, asym = 1.63
[Tue Apr 10 21:06:56 2012] Source is asymmetric
[Tue Apr 10 21:07:22 2012] XMMSAS src. selection expression = ellipse(28056.392899, 25963.416465, 399.055344, 245.076822, 99.886459, X, Y)
[Tue Apr 10 21:07:22 2012] Not overwriting source region fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src18_src.reg
[Tue Apr 10 21:07:22 2012] Extracting stamp from image fullrun_mos2_xmm0500730201_pi300-10000_cl_sm2.00.img.gz, (300, 276) - (346, 322)
[Tue Apr 10 21:07:22 2012] XMMSAS bgd. selection expression = annulus(28056.392899, 25963.416465, 665.092240, 1330.184480, X, Y) && !ellipse(26309.580920, 27091.531400, 429.468812, 347.255210, 14.060000, X, Y) && !ellipse(27473.344800, 27184.059800, 434.690413, 434.690413, 0.000000, X, Y) && !ellipse(26877.835388, 26387.892212, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Apr 10 21:07:22 2012] Writing fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src18.gif
[Tue Apr 10 21:07:23 2012] ../../xmm0500730201/products/events/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src18_src.evt and ../../xmm0500730201/products/events/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src18_bgd.evt exist, delete to re-create
[Tue Apr 10 21:07:23 2012] Mean detx,y = (-846.89, -924.39) 
[Tue Apr 10 21:07:23 2012] ../../xmm0500730201/products/images/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src18_src.img and ../../xmm0500730201/products/images/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src18_bgd.img exist, delete to re-create
[Tue Apr 10 21:07:23 2012] ../../xmm0500730201/products/spectra/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src18_src_b10.pi.gz and ../../xmm0500730201/products/spectra/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src18_bgd.pi exist, delete to re-create
[Tue Apr 10 21:07:23 2012] Setting source spectrum file to fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Tue Apr 10 21:07:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Tue Apr 10 21:07:23 2012] ../../xmm0500730201/products/lightcurves/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src18_src.lc and ../../xmm0500730201/products/lightcurves/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src18_bgd.lc exist, delete to re-create
[Tue Apr 10 21:07:24 2012] Not generating rmf since there are only 61 counts
[Tue Apr 10 21:07:24 2012] rmf not generated due to insufficient counts
[Tue Apr 10 21:07:24 2012] fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src18.arf exists, delete to re-create
[Tue Apr 10 21:08:01 2012] Updating aperture counts using extracted products
[Tue Apr 10 21:08:01 2012] Error reading totcts from fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Tue Apr 10 21:08:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 21:08:02 2012] Using photon index=1.80, rate=0.00176, arf fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src18.arf
[Tue Apr 10 21:08:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 21:08:02 2012] Updating source flux to 2.2e-14
[Tue Apr 10 21:08:05 2012] Flag p found in src. 18 procflags, skipping spectral fitting
[Tue Apr 10 21:08:05 2012] Source 18 has fewer than 100.000000 counts, skipping spectral fitting