[Tue Apr 10 21:05:47 2012] Detection parameters:
  Position = (309.5, 303.9) = 20 34 56.46 60 8 31.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.1 +/- 16.4
  Background counts = 30.9
  Rate = 0.004 +/- 0.0005

[Tue Apr 10 21:05:47 2012] Off-axis axis estimate = 0.89'
[Tue Apr 10 21:06:10 2012] Using EEF radius (= 6.88 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:06:10 2012] Initial guess for spatial extent in simple fitting = 6.88"
[Tue Apr 10 21:06:10 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.155
[Tue Apr 10 21:06:10 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 6.88"
[Tue Apr 10 21:06:11 2012] fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_src14.ximg exists
[Tue Apr 10 21:06:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_src14.csv
[Tue Apr 10 21:06:11 2012] fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_src14_1.ximg exists
[Tue Apr 10 21:06:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_src14.csv
[Tue Apr 10 21:06:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:06:11 2012] fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Tue Apr 10 21:06:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src14.csv
[Tue Apr 10 21:06:11 2012] fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Tue Apr 10 21:06:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src14.csv
[Tue Apr 10 21:06:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:06:27 2012] Spatial fit model total counts = 1325.610000, observed total counts = 1555.000000
[Tue Apr 10 21:06:27 2012] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Apr 10 21:06:27 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:06:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:06:27 2012] Assessing source extent using major
[Tue Apr 10 21:06:27 2012] Source does appear to be extended
[Tue Apr 10 21:06:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:06:40 2012] Using EEF radius (= 6.88 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:06:40 2012] Initial guess for spatial extent in simple fitting = 6.88"
[Tue Apr 10 21:06:40 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.155
[Tue Apr 10 21:06:40 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 6.88"
[Tue Apr 10 21:06:41 2012] fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_src13.ximg exists
[Tue Apr 10 21:06:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_src13.csv
[Tue Apr 10 21:06:41 2012] fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue Apr 10 21:06:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_src13.csv
[Tue Apr 10 21:06:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:06:41 2012] fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue Apr 10 21:06:41 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src13.csv
[Tue Apr 10 21:06:41 2012] fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Apr 10 21:06:41 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src13.csv
[Tue Apr 10 21:06:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:06:56 2012] Spatial fit model total counts = -262.788000, observed total counts = 1555.000000
[Tue Apr 10 21:06:56 2012] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Apr 10 21:06:56 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 31.531827 pixels away
[Tue Apr 10 21:06:56 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 42.942133 pixels away
[Tue Apr 10 21:06:56 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:06:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:06:56 2012] Assessing source extent using major
[Tue Apr 10 21:06:56 2012] Source does appear to be extended
[Tue Apr 10 21:06:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:07:22 2012] XMMSAS src. selection expression = ellipse(26877.835388, 26387.892212, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Apr 10 21:07:22 2012] Not overwriting source region fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src17_src.reg
[Tue Apr 10 21:07:22 2012] Extracting stamp from image fullrun_mos2_xmm0500730201_pi300-10000_cl_sm2.00.img.gz, (272, 266) - (347, 341)
[Tue Apr 10 21:07:22 2012] XMMSAS bgd. selection expression = annulus(26877.835388, 26387.892212, 1087.500000, 2175.000000, X, Y) && !ellipse(26309.580920, 27091.531400, 429.468812, 347.255210, 14.060000, X, Y) && !ellipse(27473.344800, 27184.059800, 434.690413, 434.690413, 0.000000, X, Y) && !ellipse(26207.388400, 28348.393000, 449.820013, 167.042405, 299.542000, X, Y) && !ellipse(26694.596000, 27921.106000, 295.435209, 295.435209, 0.000000, X, Y) && !ellipse(28056.392899, 25963.416465, 532.073792, 326.769095, 99.886459, X, Y) && !ellipse(25527.211904, 23799.413910, 535.428503, 235.771701, 50.816463, X, Y) && !ellipse(24402.662500, 25174.332520, 753.355222, 753.355222, 0.000000, X, Y)
[Tue Apr 10 21:07:22 2012] Writing fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src17.gif
[Tue Apr 10 21:07:23 2012] ../../xmm0500730201/products/events/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src17_src.evt and ../../xmm0500730201/products/events/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src17_bgd.evt exist, delete to re-create
[Tue Apr 10 21:07:23 2012] Mean detx,y = (452.58, -825.40) 
[Tue Apr 10 21:07:23 2012] ../../xmm0500730201/products/images/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src17_src.img and ../../xmm0500730201/products/images/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src17_bgd.img exist, delete to re-create
[Tue Apr 10 21:07:23 2012] ../../xmm0500730201/products/spectra/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src17_src_b10.pi.gz and ../../xmm0500730201/products/spectra/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src17_bgd.pi exist, delete to re-create
[Tue Apr 10 21:07:23 2012] Setting source spectrum file to fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Apr 10 21:07:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Tue Apr 10 21:07:23 2012] ../../xmm0500730201/products/lightcurves/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src17_src.lc and ../../xmm0500730201/products/lightcurves/fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src17_bgd.lc exist, delete to re-create
[Tue Apr 10 21:07:24 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Apr 10 21:07:24 2012] rmf not generated due to insufficient counts
[Tue Apr 10 21:07:24 2012] fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src17.arf exists, delete to re-create
[Tue Apr 10 21:08:01 2012] Updating aperture counts using extracted products
[Tue Apr 10 21:08:01 2012] Error reading totcts from fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Apr 10 21:08:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 21:08:02 2012] Using photon index=1.80, rate=0.00384, arf fullrun_mos2_xmm0500730201_pi300-10000_pass1_cl_src17.arf
[Tue Apr 10 21:08:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 21:08:02 2012] Updating source flux to 4.2e-14
[Tue Apr 10 21:08:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting