[Tue Apr 10 21:05:46 2012] Detection parameters:
  Position = (362.2, 311.9) = 20 34 25.75 60 9 6.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 238.5 +/- 20.3
  Background counts = 25.8
  Rate = 0.007 +/- 0.0006

[Tue Apr 10 21:05:46 2012] Off-axis axis estimate = 4.72'
[Tue Apr 10 21:06:09 2012] Using EEF radius (= 8.79 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:06:09 2012] Initial guess for spatial extent in simple fitting = 8.79"
[Tue Apr 10 21:06:09 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.983
[Tue Apr 10 21:06:09 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 8.79"
[Tue Apr 10 21:06:10 2012] fullrun_mos1_xmm0500730201_pi300-10000_cl_pass0_src9.ximg exists
[Tue Apr 10 21:06:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500730201_pi300-10000_cl_pass0_src9.csv
[Tue Apr 10 21:06:10 2012] fullrun_mos1_xmm0500730201_pi300-10000_cl_pass0_src9_1.ximg exists
[Tue Apr 10 21:06:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500730201_pi300-10000_cl_pass0_src9.csv
[Tue Apr 10 21:06:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500730201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500730201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:06:10 2012] fullrun_mos1_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Tue Apr 10 21:06:10 2012] fullrun_mos1_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Tue Apr 10 21:06:10 2012] Fit fullrun_mos1_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Tue Apr 10 21:06:23 2012] Spatial fit model total counts = 385.777000, observed total counts = 380.000000
[Tue Apr 10 21:06:23 2012] Offset between fit and detection position for source 10 = 0.082241 pixels
[Tue Apr 10 21:06:23 2012] 387.238000 total counts/ 210.996000 bgd. counts: snr = 12.133115
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.082241 pixels
  Position = (362.2, 311.8) = 20 34 25.78 60 9 6.5
  Extent = 6.1 (5.4-6.9)", rotation angle = 0
  Source counts = 176.2 +/- 19.7
  Background counts = 211.0
  Rate = 0.005 +/- 0.0006
[Tue Apr 10 21:06:23 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:06:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:06:23 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 21:06:23 2012] Source does appear to be extended
[Tue Apr 10 21:06:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:06:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:06:40 2012] Initial guess for spatial extent in simple fitting = 6.07"
[Tue Apr 10 21:06:40 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.114
[Tue Apr 10 21:06:40 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 6.07"
[Tue Apr 10 21:06:40 2012] fullrun_mos1_xmm0500730201_pi300-10000_cl_pass1_src9.ximg exists
[Tue Apr 10 21:06:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500730201_pi300-10000_cl_pass1_src9.csv
[Tue Apr 10 21:06:40 2012] fullrun_mos1_xmm0500730201_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue Apr 10 21:06:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500730201_pi300-10000_cl_pass1_src9.csv
[Tue Apr 10 21:06:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500730201_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500730201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:06:40 2012] fullrun_mos1_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue Apr 10 21:06:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src9.csv
[Tue Apr 10 21:06:40 2012] fullrun_mos1_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue Apr 10 21:06:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src9.csv
[Tue Apr 10 21:06:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:06:53 2012] Warning, spatial fit 9 centroid is now closest to src. 9
[Tue Apr 10 21:06:53 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:06:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:06:53 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 21:06:53 2012] Source does appear to be extended
[Tue Apr 10 21:06:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:07:18 2012] XMMSAS src. selection expression = ellipse(31459.058320, 27079.489700, 363.993610, 363.993610, 0.000000, X, Y)
[Tue Apr 10 21:07:18 2012] Not overwriting source region fullrun_mos1_xmm0500730201_pi300-10000_pass1_cl_src10_src.reg
[Tue Apr 10 21:07:18 2012] Extracting stamp from image fullrun_mos1_xmm0500730201_pi300-10000_cl_sm2.00.img.gz, (341, 291) - (383, 333)
[Tue Apr 10 21:07:18 2012] XMMSAS bgd. selection expression = annulus(31459.058320, 27079.489700, 606.656017, 1213.312035, X, Y) && !ellipse(29840.168396, 27539.468689, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Apr 10 21:07:18 2012] Writing fullrun_mos1_xmm0500730201_pi300-10000_pass1_cl_src10.gif
[Tue Apr 10 21:07:19 2012] ../../xmm0500730201/products/events/fullrun_mos1_xmm0500730201_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0500730201/products/events/fullrun_mos1_xmm0500730201_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create
[Tue Apr 10 21:07:19 2012] Mean detx,y = (1351.33, 3580.87) 
[Tue Apr 10 21:07:19 2012] ../../xmm0500730201/products/images/fullrun_mos1_xmm0500730201_pi300-10000_pass1_cl_src10_src.img and ../../xmm0500730201/products/images/fullrun_mos1_xmm0500730201_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create
[Tue Apr 10 21:07:19 2012] ../../xmm0500730201/products/spectra/fullrun_mos1_xmm0500730201_pi300-10000_pass1_cl_src10_src_b10.pi.gz and ../../xmm0500730201/products/spectra/fullrun_mos1_xmm0500730201_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create
[Tue Apr 10 21:07:19 2012] Setting source spectrum file to fullrun_mos1_xmm0500730201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Apr 10 21:07:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0500730201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Apr 10 21:07:19 2012] ../../xmm0500730201/products/lightcurves/fullrun_mos1_xmm0500730201_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0500730201/products/lightcurves/fullrun_mos1_xmm0500730201_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create
[Tue Apr 10 21:07:21 2012] fullrun_mos1_xmm0500730201_pi300-10000_pass1_cl_src10.rmf exists, delete to re-create
[Tue Apr 10 21:07:21 2012] fullrun_mos1_xmm0500730201_pi300-10000_pass1_cl_src10.arf exists, delete to re-create
[Tue Apr 10 21:08:01 2012] Updating aperture counts using extracted products
[Tue Apr 10 21:08:01 2012] Error reading totcts from fullrun_mos1_xmm0500730201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Apr 10 21:08:01 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 21:08:01 2012] Using photon index=1.80, rate=0.00508, arf fullrun_mos1_xmm0500730201_pi300-10000_pass1_cl_src10.arf
[Tue Apr 10 21:08:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 21:08:01 2012] Updating source flux to 6.3e-14