[Tue Apr 10 14:09:53 2012] Detection parameters:
  Position = (421.1, 336.0) = 20 33 51.58 60 10 50.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.1 +/- 14.4
  Background counts = 20.2
  Rate = 0.006 +/- 0.0008

[Tue Apr 10 14:09:53 2012] Off-axis axis estimate = 9.30'
[Tue Apr 10 14:10:20 2012] Using EEF radius (= 11.08 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 14:10:20 2012] Initial guess for spatial extent in simple fitting = 11.08"
[Tue Apr 10 14:10:20 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.969
[Tue Apr 10 14:10:20 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 11.08"
[Tue Apr 10 14:10:21 2012] fullrun_mos2_xmm0500730101_pi300-10000_cl_pass0_src9.ximg exists
[Tue Apr 10 14:10:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500730101_pi300-10000_cl_pass0_src9.csv
[Tue Apr 10 14:10:21 2012] fullrun_mos2_xmm0500730101_pi300-10000_cl_pass0_src9_1.ximg exists
[Tue Apr 10 14:10:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500730101_pi300-10000_cl_pass0_src9.csv
[Tue Apr 10 14:10:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500730101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500730101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 14:10:22 2012] fullrun_mos2_xmm0500730101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Tue Apr 10 14:10:22 2012] fullrun_mos2_xmm0500730101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Tue Apr 10 14:10:22 2012] Fit fullrun_mos2_xmm0500730101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Tue Apr 10 14:10:39 2012] Spatial fit model total counts = 256.899000, observed total counts = 257.000000
[Tue Apr 10 14:10:39 2012] Offset between fit and detection position for source 3 = 0.172080 pixels
[Tue Apr 10 14:10:39 2012] 254.461600 total counts/ 186.617000 bgd. counts: snr = 4.966377
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.172080 pixels
  Position = (421.0, 335.9) = 20 33 51.68 60 10 50.1
  Extent = 3.9 (3.1-4.8)", rotation angle = 0
  Source counts = 67.8 +/- 16.0
  Background counts = 186.6
  Rate = 0.002 +/- 0.0005
[Tue Apr 10 14:10:39 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 14:10:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 14:10:39 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 14:10:39 2012] Source does appear to be extended
[Tue Apr 10 14:10:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 14:10:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 14:10:55 2012] Initial guess for spatial extent in simple fitting = 3.90"
[Tue Apr 10 14:10:55 2012] source mask rpix=0.9, npix_max = 7, mask sum = 4, frac = 0.513
[Tue Apr 10 14:10:55 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 3.90"
[Tue Apr 10 14:10:56 2012] fullrun_mos2_xmm0500730101_pi300-10000_cl_pass1_src9.ximg exists
[Tue Apr 10 14:10:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500730101_pi300-10000_cl_pass1_src9.csv
[Tue Apr 10 14:10:56 2012] fullrun_mos2_xmm0500730101_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue Apr 10 14:10:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500730101_pi300-10000_cl_pass1_src9.csv
[Tue Apr 10 14:10:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500730101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500730101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 14:10:56 2012] fullrun_mos2_xmm0500730101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue Apr 10 14:10:56 2012] fullrun_mos2_xmm0500730101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue Apr 10 14:10:56 2012] Fit fullrun_mos2_xmm0500730101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Tue Apr 10 14:11:09 2012] Spatial fit model total counts = 256.898000, observed total counts = 257.000000
[Tue Apr 10 14:11:09 2012] Offset between fit and detection position for source 3 = 0.000941 pixels
[Tue Apr 10 14:11:09 2012] 254.460300 total counts/ 186.604000 bgd. counts: snr = 4.967406
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000941 pixels
  Position = (421.0, 335.9) = 20 33 51.68 60 10 50.1
  Extent = 3.9 (3.1-4.8)", rotation angle = 0
  Source counts = 67.9 +/- 16.0
  Background counts = 186.6
  Rate = 0.002 +/- 0.0005
[Tue Apr 10 14:11:09 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 14:11:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 14:11:09 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 14:11:09 2012] Source does appear to be extended
[Tue Apr 10 14:11:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 14:11:29 2012] XMMSAS src. selection expression = ellipse(36574.291240, 29176.194200, 233.915407, 233.915407, 0.000000, X, Y)
[Tue Apr 10 14:11:29 2012] Not overwriting source region fullrun_mos2_xmm0500730101_pi300-10000_pass1_cl_src3_src.reg
[Tue Apr 10 14:11:29 2012] Extracting stamp from image fullrun_mos2_xmm0500730101_pi300-10000_cl_sm2.00.img.gz, (408, 322) - (434, 349)
[Tue Apr 10 14:11:29 2012] XMMSAS bgd. selection expression = annulus(36574.291240, 29176.194200, 389.859011, 779.718022, X, Y)
[Tue Apr 10 14:11:29 2012] Writing fullrun_mos2_xmm0500730101_pi300-10000_pass1_cl_src3.gif
[Tue Apr 10 14:11:29 2012] ../../xmm0500730101/products/events/fullrun_mos2_xmm0500730101_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0500730101/products/events/fullrun_mos2_xmm0500730101_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Tue Apr 10 14:11:29 2012] Mean detx,y = (-7989.38, 4686.10) 
[Tue Apr 10 14:11:29 2012] ../../xmm0500730101/products/images/fullrun_mos2_xmm0500730101_pi300-10000_pass1_cl_src3_src.img and ../../xmm0500730101/products/images/fullrun_mos2_xmm0500730101_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Tue Apr 10 14:11:29 2012] ../../xmm0500730101/products/spectra/fullrun_mos2_xmm0500730101_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0500730101/products/spectra/fullrun_mos2_xmm0500730101_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Tue Apr 10 14:11:29 2012] Setting source spectrum file to fullrun_mos2_xmm0500730101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Apr 10 14:11:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500730101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Apr 10 14:11:29 2012] ../../xmm0500730101/products/lightcurves/fullrun_mos2_xmm0500730101_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0500730101/products/lightcurves/fullrun_mos2_xmm0500730101_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Tue Apr 10 14:11:31 2012] Not generating rmf since there are only 67 counts
[Tue Apr 10 14:11:31 2012] rmf not generated due to insufficient counts
[Tue Apr 10 14:11:31 2012] fullrun_mos2_xmm0500730101_pi300-10000_pass1_cl_src3.arf exists, delete to re-create
[Tue Apr 10 14:12:54 2012] Updating aperture counts using extracted products
[Tue Apr 10 14:12:54 2012] Error reading totcts from fullrun_mos2_xmm0500730101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Apr 10 14:12:54 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 14:12:54 2012] Using photon index=1.80, rate=0.00221, arf fullrun_mos2_xmm0500730101_pi300-10000_pass1_cl_src3.arf
[Tue Apr 10 14:12:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 14:12:54 2012] Updating source flux to 6.2e-14
[Tue Apr 10 14:12:58 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting