[Mon Aug 27 23:04:48 2012] Detection parameters: Position = (210.5, 411.5) = 20 9 56.37 35 53 43.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 40.5 +/- 9.1 Background counts = 9.6 Rate = 0.003 +/- 0.0008 [Mon Aug 27 23:04:48 2012] Off-axis axis estimate = 10.39' [Tue Aug 28 00:13:01 2012] Using EEF radius (= 11.62 ")to estimate initial spatial extent for simple fitting [Tue Aug 28 00:13:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Tue Aug 28 00:13:01 2012] Initial guess for spatial extent in simple fitting = 11.62" [Tue Aug 28 00:13:01 2012] source mask rpix=2.7, npix_max = 40, mask sum = 49, frac = 1.218 [Tue Aug 28 00:13:01 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 11.62" [Tue Aug 28 00:39:10 2012] fullrun_mos2_xmm0500680201_pi300-10000_cl_pass0_src9.ximg exists [Tue Aug 28 00:39:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500680201_pi300-10000_cl_pass0_src9.csv [Tue Aug 28 00:39:10 2012] fullrun_mos2_xmm0500680201_pi300-10000_cl_pass0_src9_1.ximg exists [Tue Aug 28 00:39:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500680201_pi300-10000_cl_pass0_src9.csv [Tue Aug 28 00:39:10 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0500680201_pi300-10000_cl_pass0_src9_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0500680201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Aug 28 00:39:10 2012] fullrun_mos2_xmm0500680201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists [Tue Aug 28 00:39:10 2012] fullrun_mos2_xmm0500680201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists [Tue Aug 28 00:39:10 2012] Fit fullrun_mos2_xmm0500680201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly [Tue Aug 28 00:39:24 2012] Spatial fit model total counts = 136.962000, observed total counts = 137.000000 [Tue Aug 28 00:39:24 2012] Offset between fit and detection position for source 6 = 0.082150 pixels [Tue Aug 28 00:39:24 2012] 139.173500 total counts/ 115.862000 bgd. counts: snr = 2.165707 Spatial fit parameters: Offset between fit and detection position for source 6 = 0.082150 pixels Position = (210.5, 411.5) = 20 9 56.35 35 53 42.6 Extent = 4.7 (2.9-7.3)", rotation angle = 0 Source counts = 23.3 +/- 11.8 Background counts = 115.9 Rate = 0.001 +/- 0.0005 [Tue Aug 28 00:39:24 2012] Vigneting correction estimate = 1.000000 [Tue Aug 28 00:39:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Aug 28 00:39:24 2012] Assessing source extent using major axis lower bound [Tue Aug 28 00:39:24 2012] Source does appear to be extended [Tue Aug 28 00:39:24 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Aug 28 00:39:24 2012] Deleting source due to low Poisson probability 0.9