[Mon Aug 27 23:04:29 2012] Detection parameters:
  Position = (357.8, 272.4) = 20 9 3.68 35 43 37.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.3 +/- 7.1
  Background counts = 10.0
  Rate = 0.002 +/- 0.0004

[Mon Aug 27 23:04:29 2012] Off-axis axis estimate = 4.70'
[Mon Aug 27 23:49:14 2012] Using EEF radius (= 8.78 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 23:49:14 2012] Initial guess for spatial extent in simple fitting = 8.78"
[Mon Aug 27 23:49:14 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.986
[Mon Aug 27 23:49:14 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 8.78"
[Tue Aug 28 00:13:01 2012] fullrun_mos1_xmm0500680201_pi300-10000_cl_pass0_src13.ximg exists
[Tue Aug 28 00:13:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500680201_pi300-10000_cl_pass0_src13.csv
[Tue Aug 28 00:13:01 2012] fullrun_mos1_xmm0500680201_pi300-10000_cl_pass0_src13_1.ximg exists
[Tue Aug 28 00:13:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500680201_pi300-10000_cl_pass0_src13.csv
[Tue Aug 28 00:13:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500680201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500680201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 00:13:01 2012] fullrun_mos1_xmm0500680201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Tue Aug 28 00:13:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500680201_pi300-10000_cl_pass0_tfrozen_src13.csv
[Tue Aug 28 00:13:01 2012] fullrun_mos1_xmm0500680201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Tue Aug 28 00:13:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500680201_pi300-10000_cl_pass0_tfrozen_src13.csv
[Tue Aug 28 00:13:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500680201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500680201_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 00:39:21 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 16.890856 pixels away
[Tue Aug 28 00:39:21 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 00:39:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 00:39:21 2012] Assessing source extent using major
[Tue Aug 28 00:39:21 2012] Source does appear to be extended
[Tue Aug 28 00:39:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 01:14:08 2012] Using EEF radius (= 8.78 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 01:14:08 2012] Initial guess for spatial extent in simple fitting = 8.78"
[Tue Aug 28 01:14:08 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.986
[Tue Aug 28 01:14:08 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 8.78"
[Tue Aug 28 01:36:10 2012] fullrun_mos1_xmm0500680201_pi300-10000_cl_pass1_src13.ximg exists
[Tue Aug 28 01:36:10 2012] fullrun_mos1_xmm0500680201_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue Aug 28 01:36:10 2012] Fit fullrun_mos1_xmm0500680201_pi300-10000_cl_pass1_src13 appears to have run properly
[Tue Aug 28 01:36:10 2012] fullrun_mos1_xmm0500680201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue Aug 28 01:36:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500680201_pi300-10000_cl_pass1_tfrozen_src13.csv
[Tue Aug 28 01:36:10 2012] fullrun_mos1_xmm0500680201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Aug 28 01:36:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500680201_pi300-10000_cl_pass1_tfrozen_src13.csv
[Tue Aug 28 01:36:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500680201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500680201_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 02:02:02 2012] Source 10 is offset by 5.964090 and -2.363181 pixels which is larger than
2 X fitted extent = 5.197885 x 5.197885, not incorporating fit results
[Tue Aug 28 02:02:02 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 02:02:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 02:02:02 2012] Assessing source extent using major
[Tue Aug 28 02:02:02 2012] Source does appear to be extended
[Tue Aug 28 02:02:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 02:20:56 2012] XMMSAS src. selection expression = ellipse(31077.159821, 23649.396759, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 28 02:20:56 2012] Writing source region out to fullrun_mos1_xmm0500680201_pi300-10000_pass1_cl_src10_src.reg
[Tue Aug 28 02:20:56 2012] Extracting stamp from image fullrun_mos1_xmm0500680201_pi300-10000_cl_sm2.00.img.gz, (320, 235) - (395, 310)
[Tue Aug 28 02:20:56 2012] XMMSAS bgd. selection expression = annulus(31077.159821, 23649.396759, 1087.500000, 2175.000000, X, Y) && !ellipse(30394.427780, 24234.681400, 208.821606, 208.821606, 0.000000, X, Y)
[Tue Aug 28 02:20:56 2012] Writing fullrun_mos1_xmm0500680201_pi300-10000_pass1_cl_src10.gif
[Tue Aug 28 02:23:51 2012] Mean detx,y = (1448.22, -6076.74) 
[Tue Aug 28 02:23:52 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 02:24:17 2012] grppha failed
[Tue Aug 28 02:24:17 2012] Setting source spectrum file to fullrun_mos1_xmm0500680201_pi300-10000_pass1_cl_src10_src.pi.gz
[Tue Aug 28 02:24:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0500680201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Aug 28 02:25:23 2012] Not generating rmf since there are only 27 counts
[Tue Aug 28 02:25:23 2012] rmf not generated due to insufficient counts
[Tue Aug 28 02:29:59 2012] Updating aperture counts using extracted products
[Tue Aug 28 02:29:59 2012] Error reading totcts from fullrun_mos1_xmm0500680201_pi300-10000_pass1_cl_src10_src.pi.gz
[Tue Aug 28 02:29:59 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 02:30:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Aug 28 02:30:01 2012] xmm0500680201/analysis//spectral/fullrun_mos1_xmm0500680201_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete