[Mon Mar 26 21:44:09 2012] Detection parameters:
  Position = (312.2, 325.1) = 17 20 6.71 26 37 45.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 633.3 +/- 33.2
  Background counts = 35.7
  Rate = 0.04 +/- 0.002

[Mon Mar 26 21:44:12 2012] Off-axis axis estimate = 2.18'
[Tue Mar 27 05:21:06 2012] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 05:21:06 2012] Initial guess for spatial extent in simple fitting = 7.52"
[Tue Mar 27 05:21:06 2012] source mask rpix=1.7, npix_max = 19, mask sum = 11, frac = 0.554
[Tue Mar 27 05:21:06 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.52"
[Tue Mar 27 07:57:31 2012] fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_src4.ximg exists
[Tue Mar 27 07:57:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_src4.csv
[Tue Mar 27 07:57:31 2012] fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Mar 27 07:57:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_src4.csv
[Tue Mar 27 07:57:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 07:57:32 2012] fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Mar 27 07:57:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue Mar 27 07:57:32 2012] fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Mar 27 07:57:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue Mar 27 07:57:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 07:58:15 2012] Warning, spatial fit 4 centroid is now closest to src. 4
[Tue Mar 27 07:58:15 2012] Source 6 is offset by 2.999950 and 5.083262 pixels which is larger than
2 X fitted extent = 4.910667 x 4.910667, not incorporating fit results
[Tue Mar 27 07:58:15 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 07:58:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 07:58:15 2012] Assessing source extent using major
[Tue Mar 27 07:58:15 2012] Source does appear to be extended
[Tue Mar 27 07:58:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 12:21:46 2012] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 12:21:46 2012] Initial guess for spatial extent in simple fitting = 7.52"
[Tue Mar 27 12:21:46 2012] source mask rpix=1.7, npix_max = 19, mask sum = 11, frac = 0.554
[Tue Mar 27 12:21:46 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 7.52"
[Tue Mar 27 14:52:24 2012] fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_src4.ximg exists
[Tue Mar 27 14:52:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_src4.csv
[Tue Mar 27 14:52:24 2012] fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue Mar 27 14:52:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_src4.csv
[Tue Mar 27 14:52:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 14:52:24 2012] fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue Mar 27 14:52:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_tfrozen_src4.csv
[Tue Mar 27 14:52:24 2012] fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Mar 27 14:52:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_tfrozen_src4.csv
[Tue Mar 27 14:52:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 14:52:51 2012] Source 6 is offset by -0.726671 and -8.873888 pixels which is larger than
2 X fitted extent = 1.432299 x 1.432299, not incorporating fit results
[Tue Mar 27 14:52:51 2012] Warning, spatial fit 4 centroid is now closest to src. 5
[Tue Mar 27 14:52:51 2012] Spatial fit model total counts = 3472.840000, observed total counts = 2805.000000
[Tue Mar 27 14:52:51 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Mar 27 14:52:51 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 14:52:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 14:52:51 2012] Assessing source extent using major
[Tue Mar 27 14:52:51 2012] Source does appear to be extended
[Tue Mar 27 14:52:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 14:52:51 2012] Source is confused with source 5
[Tue Mar 27 19:40:11 2012] XMMSAS src. selection expression = ellipse(27115.659637, 28233.851776, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Mar 27 19:40:11 2012] Writing source region out to fullrun_mos2_xmm0500670401_pi300-10000_pass1_cl_src6_src.reg
[Tue Mar 27 19:40:11 2012] Extracting stamp from image fullrun_mos2_xmm0500670401_pi300-10000_cl_sm2.00.img.gz, (275, 288) - (350, 363)
[Tue Mar 27 19:40:11 2012] XMMSAS bgd. selection expression = annulus(27115.659637, 28233.851776, 1087.500000, 2175.000000, X, Y) && !ellipse(26228.723220, 27938.363200, 996.880029, 996.880029, 0.000000, X, Y) && !ellipse(25827.688995, 27767.612701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27695.980000, 27616.628000, 1376.488040, 1376.488040, 0.000000, X, Y) && !ellipse(25721.102844, 25801.321899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28251.414795, 27451.717316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28037.151276, 26495.845703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24184.459503, 27796.180817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27791.789398, 25413.127411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24518.733002, 28727.835907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24699.556427, 25900.670441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28833.978000, 27099.466000, 1214.960035, 1214.960035, 0.000000, X, Y) && !ellipse(29084.338000, 25880.940000, 1208.744035, 1208.744035, 0.000000, X, Y)
[Tue Mar 27 19:40:11 2012] Writing fullrun_mos2_xmm0500670401_pi300-10000_pass1_cl_src6.gif
[Tue Mar 27 19:57:10 2012] Mean detx,y = (-668.90, 4.09) 
[Tue Mar 27 19:57:13 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 19:57:29 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 19:57:29 2012] Setting source spectrum file to fullrun_mos2_xmm0500670401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Mar 27 19:57:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500670401_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Mar 27 20:09:43 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Mar 27 20:09:43 2012] rmf not generated due to insufficient counts
[Tue Mar 27 20:26:14 2012] Updating aperture counts using extracted products
[Tue Mar 27 20:26:14 2012] Error reading totcts from fullrun_mos2_xmm0500670401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Mar 27 20:26:15 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 20:26:15 2012] Using photon index=1.80, rate=0.0367, arf fullrun_mos2_xmm0500670401_pi300-10000_pass1_cl_src6.arf
[Tue Mar 27 20:26:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 20:26:15 2012] Updating source flux to 3.6e-13
[Tue Mar 27 20:27:11 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting