[Mon Mar 26 21:44:11 2012] Detection parameters:
  Position = (310.8, 287.8) = 17 20 7.19 26 35 2.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.2 +/- 11.5
  Background counts = 26.8
  Rate = 0.003 +/- 0.0007

[Mon Mar 26 21:44:12 2012] Off-axis axis estimate = 1.18'
[Tue Mar 27 05:21:06 2012] Using EEF radius (= 7.02 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 05:21:06 2012] Initial guess for spatial extent in simple fitting = 7.02"
[Tue Mar 27 05:21:06 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.896
[Tue Mar 27 05:21:06 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 7.02"
[Tue Mar 27 07:57:32 2012] fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_src28.ximg exists
[Tue Mar 27 07:57:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_src28.csv
[Tue Mar 27 07:57:32 2012] fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_src28_1.ximg exists
[Tue Mar 27 07:57:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_src28.csv
[Tue Mar 27 07:57:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 07:57:32 2012] fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Tue Mar 27 07:57:32 2012] fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Tue Mar 27 07:57:32 2012] Fit fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Tue Mar 27 07:58:15 2012] Source 33 is offset by 1.847745 and -3.284085 pixels which is larger than
2 X fitted extent = 0.863945 x 0.863945, not incorporating fit results
[Tue Mar 27 07:58:15 2012] Spatial fit model total counts = 549.188000, observed total counts = 534.000000
[Tue Mar 27 07:58:15 2012] Offset between fit and detection position for source 33 = 5.792996 pixels
[Tue Mar 27 07:58:15 2012] 506.467100 total counts/ 438.737000 bgd. counts: snr = 3.233550
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 5.792996 pixels
  Position = (313.5, 282.7) = 17 20 6.31 26 34 41.6
  Extent = 14.0 (14.0-28.1)", rotation angle = 0
  Source counts = 67.7 +/- 22.5
  Background counts = 438.7
  Rate = 0.004 +/- 0.001
[Tue Mar 27 07:58:15 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 07:58:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 07:58:15 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 07:58:15 2012] Source does appear to be extended
[Tue Mar 27 07:58:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 07:58:15 2012] Source is confused with source 34
[Tue Mar 27 12:21:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 27 12:21:46 2012] Initial guess for spatial extent in simple fitting = 14.04"
[Tue Mar 27 12:21:46 2012] source mask rpix=3.2, npix_max = 55, mask sum = 44, frac = 0.792
[Tue Mar 27 12:21:46 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 14.04"
[Tue Mar 27 14:52:24 2012] fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_src23.ximg exists
[Tue Mar 27 14:52:24 2012] fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_src23_1.ximg exists
[Tue Mar 27 14:52:24 2012] Fit fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_src23 appears to have run properly
[Tue Mar 27 14:52:25 2012] fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Tue Mar 27 14:52:25 2012] fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Tue Mar 27 14:52:25 2012] Fit fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Tue Mar 27 14:52:51 2012] Warning, spatial fit 23 centroid is now closest to src. 15
[Tue Mar 27 14:52:51 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 14:52:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 14:52:51 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 14:52:51 2012] Source does appear to be extended
[Tue Mar 27 14:52:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 19:40:11 2012] XMMSAS src. selection expression = ellipse(27223.662000, 24545.212000, 842.226024, 842.226024, 0.000000, X, Y)
[Tue Mar 27 19:40:11 2012] Writing source region out to fullrun_mos2_xmm0500670401_pi300-10000_pass1_cl_src33_src.reg
[Tue Mar 27 19:40:11 2012] Extracting stamp from image fullrun_mos2_xmm0500670401_pi300-10000_cl_sm2.00.img.gz, (265, 234) - (362, 331)
[Tue Mar 27 19:40:11 2012] XMMSAS bgd. selection expression = annulus(27223.662000, 24545.212000, 1403.710040, 2807.420081, X, Y) && !ellipse(26228.723220, 27938.363200, 996.880029, 996.880029, 0.000000, X, Y) && !ellipse(25827.688995, 27767.612701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27695.980000, 27616.628000, 1376.488040, 1376.488040, 0.000000, X, Y) && !ellipse(25721.102844, 25801.321899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28251.414795, 27451.717316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28037.151276, 26495.845703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24184.459503, 27796.180817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27791.789398, 25413.127411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24699.556427, 25900.670441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28833.978000, 27099.466000, 1214.960035, 1214.960035, 0.000000, X, Y) && !ellipse(29084.338000, 25880.940000, 1208.744035, 1208.744035, 0.000000, X, Y)
[Tue Mar 27 19:40:11 2012] Writing fullrun_mos2_xmm0500670401_pi300-10000_pass1_cl_src33.gif
[Tue Mar 27 20:03:19 2012] Mean detx,y = (575.88, -3344.90) 
[Tue Mar 27 20:03:21 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 20:03:40 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 20:03:41 2012] Setting source spectrum file to fullrun_mos2_xmm0500670401_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Tue Mar 27 20:03:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500670401_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Tue Mar 27 20:24:53 2012] Not generating rmf since there are only 67 counts
[Tue Mar 27 20:24:53 2012] rmf not generated due to insufficient counts
[Tue Mar 27 20:26:15 2012] Updating aperture counts using extracted products
[Tue Mar 27 20:26:15 2012] Error reading totcts from fullrun_mos2_xmm0500670401_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Tue Mar 27 20:26:16 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 20:26:16 2012] Using photon index=1.80, rate=0.00367, arf fullrun_mos2_xmm0500670401_pi300-10000_pass1_cl_src33.arf
[Tue Mar 27 20:26:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 20:26:16 2012] Updating source flux to 3.4e-14
[Tue Mar 27 20:27:11 2012] Flag b found in src. 33 procflags, skipping spectral fitting
[Tue Mar 27 20:27:11 2012] Flag c found in src. 33 procflags, skipping spectral fitting
[Tue Mar 27 20:27:11 2012] Source 33 has fewer than 100.000000 counts, skipping spectral fitting