[Mon Mar 26 21:44:10 2012] Detection parameters:
  Position = (282.4, 330.8) = 17 20 16.40 26 38 9.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.9 +/- 14.3
  Background counts = 38.6
  Rate = 0.004 +/- 0.0008

[Mon Mar 26 21:44:12 2012] Off-axis axis estimate = 2.62'
[Tue Mar 27 05:21:06 2012] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 05:21:06 2012] Initial guess for spatial extent in simple fitting = 7.74"
[Tue Mar 27 05:21:06 2012] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.204
[Tue Mar 27 05:21:06 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 7.74"
[Tue Mar 27 07:57:31 2012] fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_src20.ximg exists
[Tue Mar 27 07:57:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_src20.csv
[Tue Mar 27 07:57:31 2012] fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_src20_1.ximg exists
[Tue Mar 27 07:57:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_src20.csv
[Tue Mar 27 07:57:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 07:57:32 2012] fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Tue Mar 27 07:57:32 2012] fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Tue Mar 27 07:57:32 2012] Fit fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Tue Mar 27 07:58:15 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 11.222814 pixels away
[Tue Mar 27 07:58:15 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 07:58:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 07:58:15 2012] Assessing source extent using major
[Tue Mar 27 07:58:15 2012] Source does appear to be extended
[Tue Mar 27 07:58:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 12:21:46 2012] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 12:21:46 2012] Initial guess for spatial extent in simple fitting = 7.74"
[Tue Mar 27 12:21:46 2012] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.204
[Tue Mar 27 12:21:46 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 7.74"
[Tue Mar 27 14:52:24 2012] fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_src17.ximg exists
[Tue Mar 27 14:52:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_src17.csv
[Tue Mar 27 14:52:24 2012] fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_src17_1.ximg exists
[Tue Mar 27 14:52:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_src17.csv
[Tue Mar 27 14:52:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 14:52:24 2012] fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Tue Mar 27 14:52:24 2012] fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Tue Mar 27 14:52:24 2012] Fit fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Tue Mar 27 14:52:51 2012] Source 21 is offset by -6.323069 and 4.809976 pixels which is larger than
2 X fitted extent = 4.429393 x 4.429393, not incorporating fit results
[Tue Mar 27 14:52:51 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 14:52:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 14:52:51 2012] Assessing source extent using major
[Tue Mar 27 14:52:51 2012] Source does appear to be extended
[Tue Mar 27 14:52:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 19:40:11 2012] XMMSAS src. selection expression = ellipse(24518.733002, 28727.835907, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Mar 27 19:40:11 2012] Writing source region out to fullrun_mos2_xmm0500670401_pi300-10000_pass1_cl_src21_src.reg
[Tue Mar 27 19:40:11 2012] Extracting stamp from image fullrun_mos2_xmm0500670401_pi300-10000_cl_sm2.00.img.gz, (245, 293) - (320, 368)
[Tue Mar 27 19:40:11 2012] XMMSAS bgd. selection expression = annulus(24518.733002, 28727.835907, 1087.500000, 2175.000000, X, Y) && !ellipse(26228.723220, 27938.363200, 996.880029, 996.880029, 0.000000, X, Y) && !ellipse(25827.688995, 27767.612701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27115.659637, 28233.851776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27695.980000, 27616.628000, 1376.488040, 1376.488040, 0.000000, X, Y) && !ellipse(25721.102844, 25801.321899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24184.459503, 27796.180817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24699.556427, 25900.670441, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 27 19:40:11 2012] Writing fullrun_mos2_xmm0500670401_pi300-10000_pass1_cl_src21.gif
[Tue Mar 27 20:01:38 2012] Mean detx,y = (1219.21, 1406.23) 
[Tue Mar 27 20:01:40 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 20:01:54 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 20:01:55 2012] Setting source spectrum file to fullrun_mos2_xmm0500670401_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue Mar 27 20:01:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500670401_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Tue Mar 27 20:13:04 2012] Not generating rmf since there are only 67 counts
[Tue Mar 27 20:13:04 2012] rmf not generated due to insufficient counts
[Tue Mar 27 20:26:15 2012] Updating aperture counts using extracted products
[Tue Mar 27 20:26:15 2012] Error reading totcts from fullrun_mos2_xmm0500670401_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue Mar 27 20:26:16 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 20:26:16 2012] Using photon index=1.80, rate=0.0039, arf fullrun_mos2_xmm0500670401_pi300-10000_pass1_cl_src21.arf
[Tue Mar 27 20:26:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 20:26:16 2012] Updating source flux to 3.9e-14
[Tue Mar 27 20:27:11 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting