[Mon Mar 26 21:44:09 2012] Detection parameters:
  Position = (302.4, 322.1) = 17 20 9.91 26 37 32.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7323.9 +/- 101.3
  Background counts = 36.4
  Rate = 0.4 +/- 0.006

[Mon Mar 26 21:44:12 2012] Off-axis axis estimate = 1.74'
[Tue Mar 27 05:21:06 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 05:21:06 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Tue Mar 27 05:21:06 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Tue Mar 27 05:21:06 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Tue Mar 27 07:57:31 2012] fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_src1.ximg exists
[Tue Mar 27 07:57:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_src1.csv
[Tue Mar 27 07:57:31 2012] fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Mar 27 07:57:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_src1.csv
[Tue Mar 27 07:57:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 07:57:32 2012] fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Mar 27 07:57:32 2012] fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Mar 27 07:57:32 2012] Fit fullrun_mos2_xmm0500670401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Mar 27 07:58:15 2012] Spatial fit model total counts = 15043.900000, observed total counts = 14234.000000
[Tue Mar 27 07:58:15 2012] Offset between fit and detection position for source 2 = 0.514643 pixels
[Tue Mar 27 07:58:15 2012] 14901.360000 total counts/ 6763.340000 bgd. counts: snr = 98.955091
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.514643 pixels
  Position = (302.0, 321.7) = 17 20 10.02 26 37 31.2
  Extent = 12.5 (12.0-13.0)", rotation angle = 0
  Source counts = 8138.0 +/- 122.1
  Background counts = 6763.3
  Rate = 0.4 +/- 0.007
[Tue Mar 27 07:58:15 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 07:58:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 07:58:15 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 07:58:15 2012] Source does appear to be extended
[Tue Mar 27 07:58:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 07:58:15 2012] Source is confused with source 4
[Tue Mar 27 12:21:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 27 12:21:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 27 12:21:46 2012] Initial guess for spatial extent in simple fitting = 12.46"
[Tue Mar 27 12:21:46 2012] source mask rpix=2.9, npix_max = 45, mask sum = 30, frac = 0.663
[Tue Mar 27 12:21:46 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.46"
[Tue Mar 27 14:52:24 2012] fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_src1.ximg exists
[Tue Mar 27 14:52:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_src1.csv
[Tue Mar 27 14:52:24 2012] fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Mar 27 14:52:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_src1.csv
[Tue Mar 27 14:52:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 14:52:24 2012] fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Mar 27 14:52:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Mar 27 14:52:24 2012] fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Mar 27 14:52:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Mar 27 14:52:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500670401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 14:52:51 2012] Warning, spatial fit 1 centroid is now closest to src. 6
[Tue Mar 27 14:52:51 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 14:52:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 14:52:51 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 14:52:51 2012] Source does appear to be extended
[Tue Mar 27 14:52:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 19:40:11 2012] Counts = 8138.020000, rescaling region sizes by 2.000000
[Tue Mar 27 19:40:11 2012] XMMSAS src. selection expression = ellipse(26228.723220, 27938.363200, 1495.320043, 1495.320043, 0.000000, X, Y)
[Tue Mar 27 19:40:11 2012] Writing source region out to fullrun_mos2_xmm0500670401_pi300-10000_pass1_cl_src2_src.reg
[Tue Mar 27 19:40:11 2012] Extracting stamp from image fullrun_mos2_xmm0500670401_pi300-10000_cl_sm2.00.img.gz, (216, 236) - (388, 408)
[Tue Mar 27 19:40:11 2012] XMMSAS bgd. selection expression = annulus(26228.723220, 27938.363200, 4984.400143, 9968.800287, X, Y) && !ellipse(30744.720947, 19031.679535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25827.688995, 27767.612701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27115.659637, 28233.851776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30291.932251, 18818.292175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27695.980000, 27616.628000, 1376.488040, 1376.488040, 0.000000, X, Y) && !ellipse(19862.926140, 33491.060600, 527.803342, 527.803342, 0.000000, X, Y) && !ellipse(21807.160840, 28797.073600, 331.373610, 331.373610, 0.000000, X, Y) && !ellipse(18114.312485, 25627.359070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25721.102844, 25801.321899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28251.414795, 27451.717316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28037.151276, 26495.845703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24184.459503, 27796.180817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27791.789398, 25413.127411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24518.733002, 28727.835907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24699.556427, 25900.670441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28833.978000, 27099.466000, 1214.960035, 1214.960035, 0.000000, X, Y) && !ellipse(27223.662000, 24545.212000, 1122.968032, 1122.968032, 0.000000, X, Y) && !ellipse(29084.338000, 25880.940000, 1208.744035, 1208.744035, 0.000000, X, Y)
[Tue Mar 27 19:40:11 2012] Writing fullrun_mos2_xmm0500670401_pi300-10000_pass1_cl_src2.gif
[Tue Mar 27 19:40:19 2012] Mean detx,y = (137.76, 51.33) 
[Tue Mar 27 19:40:21 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 19:48:04 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 19:48:04 2012] Setting source spectrum file to fullrun_mos2_xmm0500670401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Mar 27 19:48:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500670401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Mar 27 20:26:14 2012] Updating aperture counts using extracted products
[Tue Mar 27 20:26:14 2012] Error reading totcts from fullrun_mos2_xmm0500670401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Mar 27 20:26:15 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 20:26:15 2012] Using photon index=1.80, rate=0.441, arf fullrun_mos2_xmm0500670401_pi300-10000_pass1_cl_src2.arf
[Tue Mar 27 20:26:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 20:26:15 2012] Updating source flux to 4.2e-12
[Tue Mar 27 20:27:11 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Tue Mar 27 20:27:47 2012] Reading fit data from xmm0500670401/analysis//spectral/fullrun_mos2_xmm0500670401_pi300-10000_pass1_cl_src2_pl.csv
[Tue Mar 27 20:27:47 2012] Spectral fit parameter nH value = 1.35879e+21
[Tue Mar 27 20:27:47 2012] Spectral fit parameter PhoIndex value = 2.00987
[Tue Mar 27 20:27:47 2012] Failed to get F(0.3-8.0) from xmm0500670401/analysis//spectral/fullrun_mos2_xmm0500670401_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Mar 27 20:27:47 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 20:27:47 2012] Using Nh = 1.4e+21, photon index=2.01, rate=0.441, arf fullrun_mos2_xmm0500670401_pi300-10000_pass1_cl_src2.arf
[Tue Mar 27 20:27:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 20:27:47 2012] Updating source flux to 4.3e-12