[Tue Mar 27 23:42:39 2012] Detection parameters:
  Position = (277.7, 301.7) = 17 20 17.66 26 36 2.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.9 +/- 16.3
  Background counts = 67.6
  Rate = 0.007 +/- 0.001

[Tue Mar 27 23:42:41 2012] Off-axis axis estimate = 1.52'
[Tue Mar 27 23:46:28 2012] Using EEF radius (= 7.19 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 23:46:28 2012] Initial guess for spatial extent in simple fitting = 7.19"
[Tue Mar 27 23:46:28 2012] source mask rpix=1.7, npix_max = 18, mask sum = 15, frac = 0.809
[Tue Mar 27 23:46:28 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 7.19"
[Wed Mar 28 04:16:03 2012] fullrun_pn_xmm0500670301_pi300-10000_cl_pass0_src43.ximg exists
[Wed Mar 28 04:16:03 2012] fullrun_pn_xmm0500670301_pi300-10000_cl_pass0_src43_1.ximg exists
[Wed Mar 28 04:16:03 2012] Fit fullrun_pn_xmm0500670301_pi300-10000_cl_pass0_src43 appears to have run properly
[Wed Mar 28 04:16:05 2012] fullrun_pn_xmm0500670301_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Wed Mar 28 04:16:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500670301_pi300-10000_cl_pass0_tfrozen_src43.csv
[Wed Mar 28 04:16:05 2012] fullrun_pn_xmm0500670301_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Wed Mar 28 04:16:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500670301_pi300-10000_cl_pass0_tfrozen_src43.csv
[Wed Mar 28 04:16:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500670301_pi300-10000_cl_pass0_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500670301_pi300-10000_cl_pass0_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 07:26:36 2012] Warning, spatial fit 43 centroid is now closest to src. 41
[Wed Mar 28 07:26:36 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 07:26:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 07:26:36 2012] Assessing source extent using major
[Wed Mar 28 07:26:36 2012] Source does appear to be extended
[Wed Mar 28 07:26:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 07:27:15 2012] Using EEF radius (= 7.19 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 07:27:15 2012] Initial guess for spatial extent in simple fitting = 7.19"
[Wed Mar 28 07:27:15 2012] source mask rpix=1.7, npix_max = 18, mask sum = 15, frac = 0.809
[Wed Mar 28 07:27:15 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 7.19"
[Wed Mar 28 10:52:50 2012] fullrun_pn_xmm0500670301_pi300-10000_cl_pass1_src30.ximg exists
[Wed Mar 28 10:52:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500670301_pi300-10000_cl_pass1_src30.csv
[Wed Mar 28 10:52:50 2012] fullrun_pn_xmm0500670301_pi300-10000_cl_pass1_src30_1.ximg exists
[Wed Mar 28 10:52:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500670301_pi300-10000_cl_pass1_src30.csv
[Wed Mar 28 10:52:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500670301_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500670301_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 10:52:51 2012] fullrun_pn_xmm0500670301_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Wed Mar 28 10:52:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500670301_pi300-10000_cl_pass1_tfrozen_src30.csv
[Wed Mar 28 10:52:51 2012] fullrun_pn_xmm0500670301_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Wed Mar 28 10:52:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500670301_pi300-10000_cl_pass1_tfrozen_src30.csv
[Wed Mar 28 10:52:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500670301_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500670301_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 12:48:44 2012] Source 43 is offset by -6.894938 and 5.351390 pixels which is larger than
2 X fitted extent = 6.610759 x 6.610759, not incorporating fit results
[Wed Mar 28 12:48:44 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 12:48:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 12:48:44 2012] Assessing source extent using major
[Wed Mar 28 12:48:44 2012] Source does appear to be extended
[Wed Mar 28 12:48:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 12:49:07 2012] XMMSAS src. selection expression = ellipse(24112.776367, 26202.934906, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 28 12:49:07 2012] Writing source region out to fullrun_pn_xmm0500670301_pi300-10000_pass1_cl_src43_src.reg
[Wed Mar 28 12:49:07 2012] Extracting stamp from image fullrun_pn_xmm0500670301_pi300-10000_cl_sm2.00.img.gz, (240, 264) - (315, 339)
[Wed Mar 28 12:49:07 2012] XMMSAS bgd. selection expression = annulus(24112.776367, 26202.934906, 1087.500000, 2175.000000, X, Y) && !ellipse(26169.757796, 27957.413362, 3410.024433, 3070.853695, 59.024551, X, Y) && !ellipse(25615.820312, 29054.696564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21760.485458, 28823.183319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27481.680000, 25192.466000, 2335.472067, 2335.472067, 0.000000, X, Y) && !ellipse(27662.128000, 24680.030000, 2391.824069, 2391.824069, 0.000000, X, Y) && !ellipse(23869.453552, 29182.549500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23828.775848, 26904.162659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25607.021545, 25098.636536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26914.511963, 24570.885742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26044.273010, 24752.314514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28874.422000, 22482.106000, 2683.312077, 984.104028, 59.541900, X, Y)
[Wed Mar 28 12:49:07 2012] Writing fullrun_pn_xmm0500670301_pi300-10000_pass1_cl_src43.gif
[Wed Mar 28 14:17:47 2012] Mean detx,y = (-2582.72, 397.88) 
[Wed Mar 28 14:17:52 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 14:18:34 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 14:18:35 2012] Setting source spectrum file to fullrun_pn_xmm0500670301_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Wed Mar 28 14:18:35 2012] Setting bgd. spectrum file to fullrun_pn_xmm0500670301_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Wed Mar 28 16:05:19 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 28 16:05:19 2012] rmf not generated due to insufficient counts
[Wed Mar 28 22:07:52 2012] Updating aperture counts using extracted products
[Wed Mar 28 22:07:52 2012] Error reading totcts from fullrun_pn_xmm0500670301_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Wed Mar 28 22:07:55 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 22:07:55 2012] Using photon index=1.80, rate=0.00701, arf fullrun_pn_xmm0500670301_pi300-10000_pass1_cl_src43.arf
[Wed Mar 28 22:07:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 22:07:55 2012] Updating source flux to 2.5e-14
[Wed Mar 28 22:11:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting