[Tue Mar 27 23:42:37 2012] Detection parameters:
  Position = (295.0, 334.5) = 17 20 12.06 26 38 23.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1369.8 +/- 48.7
  Background counts = 88.4
  Rate = 0.08 +/- 0.003

[Tue Mar 27 23:42:41 2012] Off-axis axis estimate = 2.63'
[Tue Mar 27 23:46:28 2012] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 23:46:28 2012] Initial guess for spatial extent in simple fitting = 7.74"
[Tue Mar 27 23:46:28 2012] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.866
[Tue Mar 27 23:46:28 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.74"
[Wed Mar 28 04:16:02 2012] fullrun_pn_xmm0500670301_pi300-10000_cl_pass0_src4.ximg exists
[Wed Mar 28 04:16:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500670301_pi300-10000_cl_pass0_src4.csv
[Wed Mar 28 04:16:02 2012] fullrun_pn_xmm0500670301_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Mar 28 04:16:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500670301_pi300-10000_cl_pass0_src4.csv
[Wed Mar 28 04:16:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500670301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500670301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 04:16:04 2012] fullrun_pn_xmm0500670301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Mar 28 04:16:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500670301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Mar 28 04:16:04 2012] fullrun_pn_xmm0500670301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Mar 28 04:16:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500670301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Mar 28 04:16:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500670301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500670301_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 07:26:36 2012] Warning, spatial fit 4 centroid is now closest to src. 33
[Wed Mar 28 07:26:36 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 07:26:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 07:26:36 2012] Assessing source extent using major
[Wed Mar 28 07:26:36 2012] Source does appear to be extended
[Wed Mar 28 07:26:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 07:27:15 2012] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 07:27:15 2012] Initial guess for spatial extent in simple fitting = 7.74"
[Wed Mar 28 07:27:15 2012] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.866
[Wed Mar 28 07:27:15 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 7.74"
[Wed Mar 28 10:52:50 2012] fullrun_pn_xmm0500670301_pi300-10000_cl_pass1_src4.ximg exists
[Wed Mar 28 10:52:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500670301_pi300-10000_cl_pass1_src4.csv
[Wed Mar 28 10:52:50 2012] fullrun_pn_xmm0500670301_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Mar 28 10:52:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500670301_pi300-10000_cl_pass1_src4.csv
[Wed Mar 28 10:52:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500670301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500670301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 10:52:51 2012] fullrun_pn_xmm0500670301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Mar 28 10:52:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500670301_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed Mar 28 10:52:51 2012] fullrun_pn_xmm0500670301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Mar 28 10:52:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500670301_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed Mar 28 10:52:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500670301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500670301_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 12:48:44 2012] Source 4 is offset by -2.840249 and 6.639064 pixels which is larger than
2 X fitted extent = 6.909517 x 4.941517, not incorporating fit results
[Wed Mar 28 12:48:44 2012] Spatial fit model total counts = 4584.130000, observed total counts = 3275.000000
[Wed Mar 28 12:48:44 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Mar 28 12:48:44 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 12:48:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 12:48:44 2012] Assessing source extent using major
[Wed Mar 28 12:48:44 2012] Source does appear to be extended
[Wed Mar 28 12:48:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 12:49:06 2012] Counts = 1369.846069, rescaling region sizes by 2.000000
[Wed Mar 28 12:49:06 2012] XMMSAS src. selection expression = ellipse(25615.820312, 29054.696564, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Mar 28 12:49:06 2012] Writing source region out to fullrun_pn_xmm0500670301_pi300-10000_pass1_cl_src4_src.reg
[Wed Mar 28 12:49:06 2012] Extracting stamp from image fullrun_pn_xmm0500670301_pi300-10000_cl_sm2.00.img.gz, (220, 260) - (370, 410)
[Wed Mar 28 12:49:06 2012] XMMSAS bgd. selection expression = annulus(25615.820312, 29054.696564, 4350.000000, 8700.000000, X, Y) && !ellipse(30646.829600, 19040.416600, 2480.307508, 2480.307508, 0.000000, X, Y) && !ellipse(26169.757796, 27957.413362, 3410.024433, 3070.853695, 59.024551, X, Y) && !ellipse(28866.560000, 38053.598800, 493.626414, 493.626414, 0.000000, X, Y) && !ellipse(19850.336578, 33497.755341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27604.812000, 30294.564000, 343.754410, 343.754410, 0.000000, X, Y) && !ellipse(21760.485458, 28823.183319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18066.386551, 25627.834320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27481.680000, 25192.466000, 2335.472067, 2335.472067, 0.000000, X, Y) && !ellipse(27662.128000, 24680.030000, 2391.824069, 2391.824069, 0.000000, X, Y) && !ellipse(22051.107620, 38576.221039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19697.038800, 31925.141400, 499.206414, 499.206414, 0.000000, X, Y) && !ellipse(26220.035950, 30645.768005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27045.609344, 30395.911163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25066.123047, 30464.700317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23869.453552, 29182.549500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23828.775848, 26904.162659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28981.707153, 26744.720184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24112.776367, 26202.934906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28506.048035, 25794.989655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28394.943024, 25183.302765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25607.021545, 25098.636536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26914.511963, 24570.885742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27897.210000, 24486.734000, 1167.736034, 1167.736034, -0.000000, X, Y) && !ellipse(26044.273010, 24752.314514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28230.672000, 23940.252000, 1207.224035, 1207.224035, 0.000000, X, Y) && !ellipse(27186.339172, 24158.878296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28945.980400, 22288.690000, 1366.552039, 1366.552039, 0.000000, X, Y) && !ellipse(28610.442000, 23051.292000, 1260.104036, 1260.104036, 0.000000, X, Y) && !ellipse(28874.422000, 22482.106000, 2683.312077, 984.104028, 59.541900, X, Y) && !ellipse(29102.221588, 21782.332367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29595.578000, 21095.182000, 1477.416043, 1477.416043, 0.000000, X, Y)
[Wed Mar 28 12:49:06 2012] Writing fullrun_pn_xmm0500670301_pi300-10000_pass1_cl_src4.gif
[Wed Mar 28 13:27:20 2012] Mean detx,y = (46.83, -729.06) 
[Wed Mar 28 13:27:32 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 13:32:31 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 13:32:32 2012] Setting source spectrum file to fullrun_pn_xmm0500670301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Mar 28 13:32:32 2012] Setting bgd. spectrum file to fullrun_pn_xmm0500670301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Mar 28 14:47:02 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 28 14:47:02 2012] rmf not generated due to insufficient counts
[Wed Mar 28 22:07:51 2012] Updating aperture counts using extracted products
[Wed Mar 28 22:07:51 2012] Error reading totcts from fullrun_pn_xmm0500670301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Mar 28 22:07:53 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 22:07:53 2012] Using photon index=1.80, rate=0.0821, arf fullrun_pn_xmm0500670301_pi300-10000_pass1_cl_src4.arf
[Wed Mar 28 22:07:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 22:07:53 2012] Updating source flux to 2e-13
[Wed Mar 28 22:11:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting