[Tue Mar 27 23:42:37 2012] Detection parameters:
  Position = (301.2, 322.0) = 17 20 10.03 26 37 31.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27606.5 +/- 198.0
  Background counts = 90.1
  Rate = 1 +/- 0.01

[Tue Mar 27 23:42:41 2012] Off-axis axis estimate = 1.72'
[Tue Mar 27 23:46:28 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 23:46:28 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Tue Mar 27 23:46:28 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Tue Mar 27 23:46:28 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.29"
[Wed Mar 28 04:16:02 2012] fullrun_pn_xmm0500670301_pi300-10000_cl_pass0_src2.ximg exists
[Wed Mar 28 04:16:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500670301_pi300-10000_cl_pass0_src2.csv
[Wed Mar 28 04:16:02 2012] fullrun_pn_xmm0500670301_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Mar 28 04:16:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500670301_pi300-10000_cl_pass0_src2.csv
[Wed Mar 28 04:16:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500670301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500670301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 04:16:04 2012] fullrun_pn_xmm0500670301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Mar 28 04:16:04 2012] fullrun_pn_xmm0500670301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Mar 28 04:16:04 2012] Fit fullrun_pn_xmm0500670301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Mar 28 07:26:36 2012] Spatial fit model total counts = 55907.100000, observed total counts = 54703.000000
[Wed Mar 28 07:26:36 2012] Offset between fit and detection position for source 2 = 0.152844 pixels
[Wed Mar 28 07:26:36 2012] 55501.100000 total counts/ 22846.000000 bgd. counts: snr = 216.045852
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.152844 pixels
  Position = (301.4, 322.0) = 17 20 9.98 26 37 30.6
  Extent = 13.0 (12.8-13.1)", rotation angle = 0
  Source counts = 32655.1 +/- 235.6
  Background counts = 22846.0
  Rate = 1 +/- 0.01
[Wed Mar 28 07:26:36 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 07:26:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 07:26:36 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 07:26:36 2012] Source does appear to be extended
[Wed Mar 28 07:26:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 07:27:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 28 07:27:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 28 07:27:15 2012] Initial guess for spatial extent in simple fitting = 13.00"
[Wed Mar 28 07:27:15 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.007
[Wed Mar 28 07:27:15 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 13.00"
[Wed Mar 28 10:52:50 2012] fullrun_pn_xmm0500670301_pi300-10000_cl_pass1_src2.ximg exists
[Wed Mar 28 10:52:50 2012] fullrun_pn_xmm0500670301_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Mar 28 10:52:50 2012] Fit fullrun_pn_xmm0500670301_pi300-10000_cl_pass1_src2 appears to have run properly
[Wed Mar 28 10:52:51 2012] fullrun_pn_xmm0500670301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Mar 28 10:52:51 2012] fullrun_pn_xmm0500670301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Mar 28 10:52:51 2012] Fit fullrun_pn_xmm0500670301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Mar 28 12:48:44 2012] Spatial fit model total counts = 61290.400000, observed total counts = 60482.000000
[Wed Mar 28 12:48:44 2012] Offset between fit and detection position for source 2 = 0.064532 pixels
[Wed Mar 28 12:48:44 2012] 60916.200000 total counts/ 26128.000000 bgd. counts: snr = 215.218140
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.064532 pixels
  Position = (301.4, 321.9) = 17 20 9.99 26 37 30.4
  Extent = 14.2" x 12.8", rotation angle = 59
  Source counts = 34788.2 +/- 246.8
  Background counts = 26128.0
  Rate = 2 +/- 0.01
[Wed Mar 28 12:48:44 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 12:48:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 12:48:44 2012] Assessing source extent using major
[Wed Mar 28 12:48:44 2012] Source does appear to be extended
[Wed Mar 28 12:48:44 2012] Computing asymmetry using major and minor axis, asym = 1.11
[Wed Mar 28 12:49:06 2012] Counts = 34788.200000, rescaling region sizes by 3.000000
[Wed Mar 28 12:49:06 2012] XMMSAS src. selection expression = ellipse(26169.757796, 27957.413362, 2557.518325, 2303.140271, 59.024551, X, Y)
[Wed Mar 28 12:49:06 2012] Writing source region out to fullrun_pn_xmm0500670301_pi300-10000_pass1_cl_src2_src.reg
[Wed Mar 28 12:49:06 2012] Extracting stamp from image fullrun_pn_xmm0500670301_pi300-10000_cl_sm2.00.img.gz, (154, 175) - (448, 469)
[Wed Mar 28 12:49:06 2012] XMMSAS bgd. selection expression = annulus(26169.757796, 27957.413362, 12787.591625, 25575.183249, X, Y) && !ellipse(30646.829600, 19040.416600, 2480.307508, 2480.307508, 0.000000, X, Y) && !ellipse(7240.718987, 27271.268250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25615.820312, 29054.696564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28866.560000, 38053.598800, 493.626414, 493.626414, 0.000000, X, Y) && !ellipse(19850.336578, 33497.755341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27604.812000, 30294.564000, 343.754410, 343.754410, 0.000000, X, Y) && !ellipse(21760.485458, 28823.183319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18066.386551, 25627.834320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27481.680000, 25192.466000, 2335.472067, 2335.472067, 0.000000, X, Y) && !ellipse(32595.202026, 15262.349045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27662.128000, 24680.030000, 2391.824069, 2391.824069, 0.000000, X, Y) && !ellipse(32194.647400, 18556.994200, 590.280817, 353.316810, 127.049000, X, Y) && !ellipse(31586.657288, 17440.647919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31950.480000, 16145.902000, 1837.704053, 1179.744034, 237.524000, X, Y) && !ellipse(18289.293518, 14050.115768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35907.948456, 38674.831482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22051.107620, 38576.221039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19697.038800, 31925.141400, 499.206414, 499.206414, 0.000000, X, Y) && !ellipse(26220.035950, 30645.768005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27045.609344, 30395.911163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25066.123047, 30464.700317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26706.139954, 14440.860413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35674.807678, 29362.990601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23869.453552, 29182.549500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36313.347534, 28887.270416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23828.775848, 26904.162659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28981.707153, 26744.720184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24112.776367, 26202.934906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28506.048035, 25794.989655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28394.943024, 25183.302765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25607.021545, 25098.636536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26914.511963, 24570.885742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27897.210000, 24486.734000, 1167.736034, 1167.736034, -0.000000, X, Y) && !ellipse(26044.273010, 24752.314514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28230.672000, 23940.252000, 1207.224035, 1207.224035, 0.000000, X, Y) && !ellipse(27186.339172, 24158.878296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28945.980400, 22288.690000, 1366.552039, 1366.552039, 0.000000, X, Y) && !ellipse(28610.442000, 23051.292000, 1260.104036, 1260.104036, 0.000000, X, Y) && !ellipse(28874.422000, 22482.106000, 2683.312077, 984.104028, 59.541900, X, Y) && !ellipse(29102.221588, 21782.332367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29595.578000, 21095.182000, 1477.416043, 1477.416043, 0.000000, X, Y) && !ellipse(31734.486000, 16909.768000, 1708.392049, 1708.392049, 0.000000, X, Y)
[Wed Mar 28 12:49:06 2012] Writing fullrun_pn_xmm0500670301_pi300-10000_pass1_cl_src2.gif
[Wed Mar 28 13:02:21 2012] Mean detx,y = (65.35, -133.10) 
[Wed Mar 28 13:02:34 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 13:25:27 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 13:25:28 2012] Setting source spectrum file to fullrun_pn_xmm0500670301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Mar 28 13:25:28 2012] Setting bgd. spectrum file to fullrun_pn_xmm0500670301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Mar 28 22:07:51 2012] Updating aperture counts using extracted products
[Wed Mar 28 22:07:51 2012] Error reading totcts from fullrun_pn_xmm0500670301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Mar 28 22:07:53 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 22:07:53 2012] Using photon index=1.80, rate=1.54, arf fullrun_pn_xmm0500670301_pi300-10000_pass1_cl_src2.arf
[Wed Mar 28 22:07:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 22:07:53 2012] Updating source flux to 3.5e-12