[Tue Mar 27 23:43:49 2012] Detection parameters:
  Position = (301.4, 321.9) = 17 20 9.98 26 37 30.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 9914.0 +/- 119.5
  Background counts = 52.3
  Rate = 0.4 +/- 0.005

[Tue Mar 27 23:43:51 2012] Off-axis axis estimate = 1.72'
[Wed Mar 28 05:44:19 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 05:44:19 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Wed Mar 28 05:44:19 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Wed Mar 28 05:44:19 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Wed Mar 28 07:26:09 2012] fullrun_mos2_xmm0500670301_pi300-10000_cl_pass0_src1.ximg exists
[Wed Mar 28 07:26:09 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0500670301_pi300-10000_cl_pass0_src1.csv
[Wed Mar 28 07:26:09 2012] fullrun_mos2_xmm0500670301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Mar 28 07:26:09 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0500670301_pi300-10000_cl_pass0_src1.csv
[Wed Mar 28 07:26:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500670301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500670301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 07:26:10 2012] fullrun_mos2_xmm0500670301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Mar 28 07:26:10 2012] fullrun_mos2_xmm0500670301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Mar 28 07:26:10 2012] Fit fullrun_mos2_xmm0500670301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Mar 28 07:26:57 2012] Spatial fit model total counts = 19823.000000, observed total counts = 19339.000000
[Wed Mar 28 07:26:57 2012] Offset between fit and detection position for source 3 = 0.109716 pixels
[Wed Mar 28 07:26:57 2012] 19639.590000 total counts/ 8273.090000 bgd. counts: snr = 124.966291
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.109716 pixels
  Position = (301.3, 321.9) = 17 20 10.01 26 37 30.2
  Extent = 13.1 (12.6-13.6)", rotation angle = 0
  Source counts = 11366.5 +/- 140.1
  Background counts = 8273.1
  Rate = 0.5 +/- 0.006
[Wed Mar 28 07:26:57 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 07:26:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 07:26:57 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 07:26:57 2012] Source does appear to be extended
[Wed Mar 28 07:26:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 11:31:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 28 11:31:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 28 11:31:27 2012] Initial guess for spatial extent in simple fitting = 13.09"
[Wed Mar 28 11:31:27 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.995
[Wed Mar 28 11:31:27 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 13.09"
[Wed Mar 28 12:48:26 2012] fullrun_mos2_xmm0500670301_pi300-10000_cl_pass1_src1.ximg exists
[Wed Mar 28 12:48:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500670301_pi300-10000_cl_pass1_src1.csv
[Wed Mar 28 12:48:26 2012] fullrun_mos2_xmm0500670301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Mar 28 12:48:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500670301_pi300-10000_cl_pass1_src1.csv
[Wed Mar 28 12:48:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500670301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500670301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 12:48:26 2012] fullrun_mos2_xmm0500670301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Mar 28 12:48:26 2012] fullrun_mos2_xmm0500670301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Mar 28 12:48:26 2012] Fit fullrun_mos2_xmm0500670301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Mar 28 12:48:53 2012] Spatial fit model total counts = 27537.200000, observed total counts = 26339.000000
[Wed Mar 28 12:48:53 2012] Offset between fit and detection position for source 3 = 0.269118 pixels
[Wed Mar 28 12:48:53 2012] 27370.200000 total counts/ 11821.700000 bgd. counts: snr = 143.004114
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.269118 pixels
  Position = (301.1, 321.7) = 17 20 10.08 26 37 29.5
  Extent = 15.8 (15.5-16.2)", rotation angle = 0
  Source counts = 15548.5 +/- 165.4
  Background counts = 11821.7
  Rate = 0.7 +/- 0.007
[Wed Mar 28 12:48:53 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 12:48:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 12:48:53 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 12:48:53 2012] Source does appear to be extended
[Wed Mar 28 12:48:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 21:11:04 2012] Counts = 15548.500000, rescaling region sizes by 3.000000
[Wed Mar 28 21:11:04 2012] XMMSAS src. selection expression = ellipse(26146.573860, 27940.348200, 2852.442082, 2852.442082, 0.000000, X, Y)
[Wed Mar 28 21:11:04 2012] Writing source region out to fullrun_mos2_xmm0500670301_pi300-10000_pass1_cl_src3_src.reg
[Wed Mar 28 21:11:04 2012] Extracting stamp from image fullrun_mos2_xmm0500670301_pi300-10000_cl_sm2.00.img.gz, (137, 158) - (465, 486)
[Wed Mar 28 21:11:04 2012] XMMSAS bgd. selection expression = annulus(26146.573860, 27940.348200, 14262.210410, 28524.420821, X, Y) && !ellipse(30892.522000, 19045.000000, 682.705620, 682.705620, 0.000000, X, Y) && !ellipse(30425.713867, 18909.257462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27593.498000, 28259.658000, 1266.008036, 1266.008036, 0.000000, X, Y) && !ellipse(27903.828979, 26931.352814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19836.667160, 33644.748383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26819.472534, 25805.389404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18047.748245, 25603.944366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24297.380554, 27418.654236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25066.606262, 25970.949066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32285.380000, 18407.058000, 1668.104048, 1668.104048, 0.000000, X, Y) && !ellipse(38990.756073, 33558.943146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25426.442383, 29876.932587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26483.465302, 25364.768707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28220.027039, 28630.900787, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 28 21:11:04 2012] Writing fullrun_mos2_xmm0500670301_pi300-10000_pass1_cl_src3.gif
[Wed Mar 28 21:11:16 2012] Mean detx,y = (134.38, 21.06) 
[Wed Mar 28 21:11:19 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 21:24:52 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 21:24:52 2012] Setting source spectrum file to fullrun_mos2_xmm0500670301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Mar 28 21:24:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500670301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Mar 28 22:07:57 2012] Updating aperture counts using extracted products
[Wed Mar 28 22:07:57 2012] Error reading totcts from fullrun_mos2_xmm0500670301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Mar 28 22:07:57 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 22:07:57 2012] Using photon index=1.80, rate=0.666, arf fullrun_mos2_xmm0500670301_pi300-10000_pass1_cl_src3.arf
[Wed Mar 28 22:07:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 22:07:57 2012] Updating source flux to 5.6e-12
[Wed Mar 28 22:11:09 2012] Reading fit data from xmm0500670301/analysis//spectral/fullrun_mos2_xmm0500670301_pi300-10000_pass1_cl_src3_pl.csv
[Wed Mar 28 22:11:09 2012] Spectral fit parameter nH value = 1.17434e+21
[Wed Mar 28 22:11:09 2012] Spectral fit parameter PhoIndex value = 1.93524
[Wed Mar 28 22:11:09 2012] Failed to get F(0.3-8.0) from xmm0500670301/analysis//spectral/fullrun_mos2_xmm0500670301_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Wed Mar 28 22:11:09 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 22:11:09 2012] Using Nh = 1.2e+21, photon index=1.94, rate=0.666, arf fullrun_mos2_xmm0500670301_pi300-10000_pass1_cl_src3.arf
[Wed Mar 28 22:11:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 22:11:09 2012] Updating source flux to 5.9e-12