[Tue Mar 27 23:43:09 2012] Detection parameters:
  Position = (391.9, 281.4) = 17 19 40.63 26 34 35.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.4 +/- 8.7
  Background counts = 17.6
  Rate = 0.002 +/- 0.0006

[Tue Mar 27 23:43:09 2012] Off-axis axis estimate = 6.89'
[Wed Mar 28 04:16:06 2012] Using EEF radius (= 9.87 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 04:16:06 2012] Initial guess for spatial extent in simple fitting = 9.87"
[Wed Mar 28 04:16:06 2012] source mask rpix=2.3, npix_max = 30, mask sum = 26, frac = 0.847
[Wed Mar 28 04:16:06 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 9.87"
[Wed Mar 28 05:44:18 2012] fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_src30.ximg exists
[Wed Mar 28 05:44:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_src30.csv
[Wed Mar 28 05:44:18 2012] fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_src30_1.ximg exists
[Wed Mar 28 05:44:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_src30.csv
[Wed Mar 28 05:44:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 05:44:19 2012] fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Wed Mar 28 05:44:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_tfrozen_src30.csv
[Wed Mar 28 05:44:19 2012] fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Wed Mar 28 05:44:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_tfrozen_src30.csv
[Wed Mar 28 05:44:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 07:26:47 2012] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 13.175709 pixels away
[Wed Mar 28 07:26:47 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 07:26:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 07:26:47 2012] Assessing source extent using major
[Wed Mar 28 07:26:47 2012] Source does appear to be extended
[Wed Mar 28 07:26:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 07:26:47 2012] Deleting source due to low Poisson probability 0.7