[Tue Mar 27 23:43:08 2012] Detection parameters:
  Position = (289.0, 339.3) = 17 20 14.01 26 38 40.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 166.7 +/- 19.3
  Background counts = 38.2
  Rate = 0.008 +/- 0.0009

[Tue Mar 27 23:43:09 2012] Off-axis axis estimate = 3.04'
[Wed Mar 28 04:16:06 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 04:16:06 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Wed Mar 28 04:16:06 2012] source mask rpix=1.8, npix_max = 21, mask sum = 18, frac = 0.831
[Wed Mar 28 04:16:06 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.95"
[Wed Mar 28 05:44:18 2012] fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_src5.ximg exists
[Wed Mar 28 05:44:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_src5.csv
[Wed Mar 28 05:44:18 2012] fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Mar 28 05:44:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_src5.csv
[Wed Mar 28 05:44:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 05:44:18 2012] fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Mar 28 05:44:18 2012] fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Mar 28 05:44:18 2012] Fit fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Mar 28 07:26:47 2012] Spatial fit model total counts = 1444.580000, observed total counts = 1428.000000
[Wed Mar 28 07:26:47 2012] Offset between fit and detection position for source 14 = 9.449687 pixels
[Wed Mar 28 07:26:47 2012] 1455.805000 total counts/ 1185.670000 bgd. counts: snr = 7.845108
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 9.449687 pixels
  Position = (295.7, 332.7) = 17 20 11.83 26 38 17.3
  Extent = 15.9 (15.9-31.8)", rotation angle = 0
  Source counts = 270.1 +/- 38.2
  Background counts = 1185.7
  Rate = 0.01 +/- 0.002
[Wed Mar 28 07:26:47 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 07:26:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 07:26:47 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 07:26:47 2012] Source does appear to be extended
[Wed Mar 28 07:26:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 07:26:47 2012] Source is confused with source 13
[Wed Mar 28 10:52:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 28 10:52:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 28 10:52:52 2012] Initial guess for spatial extent in simple fitting = 15.90"
[Wed Mar 28 10:52:52 2012] source mask rpix=3.7, npix_max = 69, mask sum = 63, frac = 0.912
[Wed Mar 28 10:52:52 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 15.90"
[Wed Mar 28 11:31:26 2012] fullrun_mos1_xmm0500670301_pi300-10000_cl_pass1_src4.ximg exists
[Wed Mar 28 11:31:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500670301_pi300-10000_cl_pass1_src4.csv
[Wed Mar 28 11:31:26 2012] fullrun_mos1_xmm0500670301_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Mar 28 11:31:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500670301_pi300-10000_cl_pass1_src4.csv
[Wed Mar 28 11:31:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500670301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500670301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 11:31:26 2012] fullrun_mos1_xmm0500670301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Mar 28 11:31:26 2012] fullrun_mos1_xmm0500670301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Mar 28 11:31:26 2012] Fit fullrun_mos1_xmm0500670301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Mar 28 12:48:48 2012] Source 14 is offset by -0.341324 and -3.908460 pixels which is larger than
2 X fitted extent = 1.789035 x 1.789035, not incorporating fit results
[Wed Mar 28 12:48:48 2012] Warning, spatial fit 4 centroid is now closest to src. 13
[Wed Mar 28 12:48:48 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 12:48:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 12:48:48 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 12:48:48 2012] Source does appear to be extended
[Wed Mar 28 12:48:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 16:32:37 2012] XMMSAS src. selection expression = ellipse(25676.878000, 28895.482000, 954.024027, 954.024027, 0.000000, X, Y)
[Wed Mar 28 16:32:37 2012] Writing source region out to fullrun_mos1_xmm0500670301_pi300-10000_pass1_cl_src14_src.reg
[Wed Mar 28 16:32:37 2012] Extracting stamp from image fullrun_mos1_xmm0500670301_pi300-10000_cl_sm2.00.img.gz, (241, 278) - (351, 388)
[Wed Mar 28 16:32:37 2012] XMMSAS bgd. selection expression = annulus(25676.878000, 28895.482000, 1590.040046, 3180.080092, X, Y) && !ellipse(26168.376200, 27943.407000, 3189.432092, 3189.432092, 0.000000, X, Y) && !ellipse(24962.204000, 29824.392000, 2544.064073, 2544.064073, 0.000000, X, Y) && !ellipse(27347.295013, 25889.139648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24740.542114, 26496.169617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26290.909302, 30139.222931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24335.575806, 29064.082092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28525.642151, 26838.572815, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 28 16:32:37 2012] Writing fullrun_mos1_xmm0500670301_pi300-10000_pass1_cl_src14.gif
[Wed Mar 28 17:00:55 2012] Mean detx,y = (935.91, -275.76) 
[Wed Mar 28 17:00:57 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 17:01:07 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 17:01:07 2012] Setting source spectrum file to fullrun_mos1_xmm0500670301_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Mar 28 17:01:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0500670301_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Wed Mar 28 22:07:56 2012] Updating aperture counts using extracted products
[Wed Mar 28 22:07:56 2012] Error reading totcts from fullrun_mos1_xmm0500670301_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Mar 28 22:07:56 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 22:07:56 2012] Using photon index=1.80, rate=0.0116, arf fullrun_mos1_xmm0500670301_pi300-10000_pass1_cl_src14.arf
[Wed Mar 28 22:07:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 22:07:56 2012] Updating source flux to 1.1e-13
[Wed Mar 28 22:08:00 2012] Flag b found in src. 14 procflags, skipping spectral fitting
[Wed Mar 28 22:08:00 2012] Flag c found in src. 14 procflags, skipping spectral fitting