[Tue Mar 27 23:43:08 2012] Detection parameters:
  Position = (302.8, 347.0) = 17 20 9.54 26 39 19.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 125.9 +/- 17.2
  Background counts = 36.3
  Rate = 0.006 +/- 0.0008

[Tue Mar 27 23:43:09 2012] Off-axis axis estimate = 3.53'
[Wed Mar 28 04:16:06 2012] Using EEF radius (= 8.20 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 04:16:06 2012] Initial guess for spatial extent in simple fitting = 8.20"
[Wed Mar 28 04:16:06 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.880
[Wed Mar 28 04:16:06 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 8.20"
[Wed Mar 28 05:44:18 2012] fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_src9.ximg exists
[Wed Mar 28 05:44:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_src9.csv
[Wed Mar 28 05:44:18 2012] fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed Mar 28 05:44:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_src9.csv
[Wed Mar 28 05:44:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 05:44:18 2012] fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed Mar 28 05:44:18 2012] fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Mar 28 05:44:18 2012] Fit fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Wed Mar 28 07:26:47 2012] Source 10 is offset by -4.399847 and 6.521321 pixels which is larger than
2 X fitted extent = 3.613476 x 3.613476, not incorporating fit results
[Wed Mar 28 07:26:47 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 07:26:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 07:26:47 2012] Assessing source extent using major
[Wed Mar 28 07:26:47 2012] Source does appear to be extended
[Wed Mar 28 07:26:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 10:52:52 2012] Using EEF radius (= 8.20 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 10:52:52 2012] Initial guess for spatial extent in simple fitting = 8.20"
[Wed Mar 28 10:52:52 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.880
[Wed Mar 28 10:52:52 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 8.20"
[Wed Mar 28 11:31:26 2012] fullrun_mos1_xmm0500670301_pi300-10000_cl_pass1_src7.ximg exists
[Wed Mar 28 11:31:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500670301_pi300-10000_cl_pass1_src7.csv
[Wed Mar 28 11:31:26 2012] fullrun_mos1_xmm0500670301_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Mar 28 11:31:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500670301_pi300-10000_cl_pass1_src7.csv
[Wed Mar 28 11:31:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500670301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500670301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 11:31:26 2012] fullrun_mos1_xmm0500670301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Mar 28 11:31:26 2012] fullrun_mos1_xmm0500670301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Mar 28 11:31:26 2012] Fit fullrun_mos1_xmm0500670301_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Mar 28 12:48:48 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 16.508657 pixels away
[Wed Mar 28 12:48:48 2012] Source 10 is offset by -4.827663 and 6.521321 pixels which is larger than
2 X fitted extent = 3.716299 x 3.716299, not incorporating fit results
[Wed Mar 28 12:48:48 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 12:48:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 12:48:48 2012] Assessing source extent using major
[Wed Mar 28 12:48:48 2012] Source does appear to be extended
[Wed Mar 28 12:48:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 12:48:48 2012] Source is confused with source 13
[Wed Mar 28 16:32:37 2012] XMMSAS src. selection expression = ellipse(26290.909302, 30139.222931, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 28 16:32:37 2012] Writing source region out to fullrun_mos1_xmm0500670301_pi300-10000_pass1_cl_src10_src.reg
[Wed Mar 28 16:32:37 2012] Extracting stamp from image fullrun_mos1_xmm0500670301_pi300-10000_cl_sm2.00.img.gz, (265, 309) - (340, 384)
[Wed Mar 28 16:32:37 2012] XMMSAS bgd. selection expression = annulus(26290.909302, 30139.222931, 1087.500000, 2175.000000, X, Y) && !ellipse(26168.376200, 27943.407000, 3189.432092, 3189.432092, 0.000000, X, Y) && !ellipse(24962.204000, 29824.392000, 2544.064073, 2544.064073, 0.000000, X, Y) && !ellipse(25676.878000, 28895.482000, 1272.032037, 1272.032037, 0.000000, X, Y) && !ellipse(24335.575806, 29064.082092, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 28 16:32:37 2012] Writing fullrun_mos1_xmm0500670301_pi300-10000_pass1_cl_src10.gif
[Wed Mar 28 17:02:03 2012] Mean detx,y = (2159.17, 764.01) 
[Wed Mar 28 17:02:05 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 17:02:19 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 17:02:19 2012] Setting source spectrum file to fullrun_mos1_xmm0500670301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Mar 28 17:02:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0500670301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed Mar 28 21:10:38 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 28 21:10:38 2012] rmf not generated due to insufficient counts
[Wed Mar 28 22:07:56 2012] Updating aperture counts using extracted products
[Wed Mar 28 22:07:56 2012] Error reading totcts from fullrun_mos1_xmm0500670301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Mar 28 22:07:57 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 22:07:57 2012] Using photon index=1.80, rate=0.00556, arf fullrun_mos1_xmm0500670301_pi300-10000_pass1_cl_src10.arf
[Wed Mar 28 22:07:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 22:07:57 2012] Updating source flux to 5.5e-14
[Wed Mar 28 22:08:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting