[Tue Mar 27 23:43:08 2012] Detection parameters:
  Position = (301.3, 321.9) = 17 20 10.02 26 37 30.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 9813.6 +/- 120.2
  Background counts = 39.3
  Rate = 0.4 +/- 0.005

[Tue Mar 27 23:43:09 2012] Off-axis axis estimate = 1.71'
[Wed Mar 28 04:16:06 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 04:16:06 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Wed Mar 28 04:16:06 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Wed Mar 28 04:16:06 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Wed Mar 28 05:44:18 2012] fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_src1.ximg exists
[Wed Mar 28 05:44:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_src1.csv
[Wed Mar 28 05:44:18 2012] fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Mar 28 05:44:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_src1.csv
[Wed Mar 28 05:44:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 05:44:18 2012] fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Mar 28 05:44:18 2012] fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Mar 28 05:44:18 2012] Fit fullrun_mos1_xmm0500670301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Mar 28 07:26:47 2012] Spatial fit model total counts = 19326.000000, observed total counts = 19326.000000
[Wed Mar 28 07:26:47 2012] Offset between fit and detection position for source 1 = 0.192602 pixels
[Wed Mar 28 07:26:47 2012] 19177.600000 total counts/ 7918.500000 bgd. counts: snr = 126.526710
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.192602 pixels
  Position = (301.3, 321.7) = 17 20 10.00 26 37 29.7
  Extent = 13.3 (12.9-13.8)", rotation angle = 0
  Source counts = 11259.1 +/- 138.5
  Background counts = 7918.5
  Rate = 0.5 +/- 0.006
[Wed Mar 28 07:26:47 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 07:26:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 07:26:47 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 07:26:47 2012] Source does appear to be extended
[Wed Mar 28 07:26:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 10:52:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 28 10:52:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 28 10:52:52 2012] Initial guess for spatial extent in simple fitting = 13.29"
[Wed Mar 28 10:52:52 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.969
[Wed Mar 28 10:52:52 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 13.29"
[Wed Mar 28 11:31:26 2012] fullrun_mos1_xmm0500670301_pi300-10000_cl_pass1_src1.ximg exists
[Wed Mar 28 11:31:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500670301_pi300-10000_cl_pass1_src1.csv
[Wed Mar 28 11:31:26 2012] fullrun_mos1_xmm0500670301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Mar 28 11:31:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500670301_pi300-10000_cl_pass1_src1.csv
[Wed Mar 28 11:31:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500670301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500670301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 11:31:26 2012] fullrun_mos1_xmm0500670301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Mar 28 11:31:26 2012] fullrun_mos1_xmm0500670301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Mar 28 11:31:26 2012] Fit fullrun_mos1_xmm0500670301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Mar 28 12:48:48 2012] Warning, spatial fit 1 centroid is now closest to src. 10
[Wed Mar 28 12:48:48 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 12:48:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 12:48:48 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 12:48:48 2012] Source does appear to be extended
[Wed Mar 28 12:48:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 16:32:37 2012] Counts = 11259.100000, rescaling region sizes by 3.000000
[Wed Mar 28 16:32:37 2012] XMMSAS src. selection expression = ellipse(26168.376200, 27943.407000, 2392.074069, 2392.074069, 0.000000, X, Y)
[Wed Mar 28 16:32:37 2012] Writing source region out to fullrun_mos1_xmm0500670301_pi300-10000_pass1_cl_src1_src.reg
[Wed Mar 28 16:32:37 2012] Extracting stamp from image fullrun_mos1_xmm0500670301_pi300-10000_cl_sm2.00.img.gz, (164, 184) - (439, 459)
[Wed Mar 28 16:32:37 2012] XMMSAS bgd. selection expression = annulus(26168.376200, 27943.407000, 11960.370344, 23920.740688, X, Y) && !ellipse(19820.432983, 33519.959351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24962.204000, 29824.392000, 2544.064073, 2544.064073, 0.000000, X, Y) && !ellipse(25676.878000, 28895.482000, 1272.032037, 1272.032037, 0.000000, X, Y) && !ellipse(27347.295013, 25889.139648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24740.542114, 26496.169617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26290.909302, 30139.222931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24335.575806, 29064.082092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28525.642151, 26838.572815, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 28 16:32:37 2012] Writing fullrun_mos1_xmm0500670301_pi300-10000_pass1_cl_src1.gif
[Wed Mar 28 16:32:47 2012] Mean detx,y = (247.62, -271.60) 
[Wed Mar 28 16:32:50 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 16:46:26 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 16:46:26 2012] Setting source spectrum file to fullrun_mos1_xmm0500670301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar 28 16:46:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0500670301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Mar 28 22:07:56 2012] Updating aperture counts using extracted products
[Wed Mar 28 22:07:56 2012] Error reading totcts from fullrun_mos1_xmm0500670301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar 28 22:07:56 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 22:07:56 2012] Using photon index=1.80, rate=0.482, arf fullrun_mos1_xmm0500670301_pi300-10000_pass1_cl_src1.arf
[Wed Mar 28 22:07:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 22:07:56 2012] Updating source flux to 4e-12
[Wed Mar 28 22:09:22 2012] Reading fit data from xmm0500670301/analysis//spectral/fullrun_mos1_xmm0500670301_pi300-10000_pass1_cl_src1_pl.csv
[Wed Mar 28 22:09:22 2012] Spectral fit parameter nH value = 1.09535e+21
[Wed Mar 28 22:09:22 2012] Spectral fit parameter PhoIndex value = 1.92823
[Wed Mar 28 22:09:22 2012] Failed to get F(0.3-8.0) from xmm0500670301/analysis//spectral/fullrun_mos1_xmm0500670301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Mar 28 22:09:22 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 22:09:22 2012] Using Nh = 1.1e+21, photon index=1.93, rate=0.482, arf fullrun_mos1_xmm0500670301_pi300-10000_pass1_cl_src1.arf
[Wed Mar 28 22:09:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 22:09:22 2012] Updating source flux to 4.2e-12