[Sun Jun 9 01:27:53 2013] Detection parameters: Position = (294.7, 335.1) = 17 20 11.83 26 38 24.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1517.5 +/- 51.5 Background counts = 145.5 Rate = 0.07 +/- 0.002 [Sun Jun 9 01:27:56 2013] Off-axis axis estimate = 2.67' [Sun Jun 9 01:33:13 2013] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 01:33:13 2013] Initial guess for spatial extent in simple fitting = 7.77" [Sun Jun 9 01:33:13 2013] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.910 [Sun Jun 9 01:33:13 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.77" [Sun Jun 9 04:32:45 2013] fullrun_pn_xmm0500670201_pi300-10000_cl_pass0_src3.ximg exists [Sun Jun 9 04:32:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500670201_pi300-10000_cl_pass0_src3.csv [Sun Jun 9 04:32:45 2013] fullrun_pn_xmm0500670201_pi300-10000_cl_pass0_src3_1.ximg exists [Sun Jun 9 04:32:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500670201_pi300-10000_cl_pass0_src3.csv [Sun Jun 9 04:32:45 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0500670201_pi300-10000_cl_pass0_src3_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0500670201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 04:32:46 2013] fullrun_pn_xmm0500670201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists [Sun Jun 9 04:32:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500670201_pi300-10000_cl_pass0_tfrozen_src3.csv [Sun Jun 9 04:32:46 2013] fullrun_pn_xmm0500670201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists [Sun Jun 9 04:32:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500670201_pi300-10000_cl_pass0_tfrozen_src3.csv [Sun Jun 9 04:32:46 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0500670201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0500670201_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 06:30:53 2013] Warning, spatial fit 3 centroid is now closest to src. 21 [Sun Jun 9 06:30:53 2013] Spatial fit model total counts = 5682.950000, observed total counts = 3888.000000 [Sun Jun 9 06:30:53 2013] Poor agreement between spatial fit and data for source 3 It may help to tweak spatial fit manually Not incorporating fit results [Sun Jun 9 06:30:54 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 06:30:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 06:30:54 2013] Assessing source extent using major [Sun Jun 9 06:30:54 2013] Source does appear to be extended [Sun Jun 9 06:30:54 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 06:31:12 2013] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 06:31:12 2013] Initial guess for spatial extent in simple fitting = 7.77" [Sun Jun 9 06:31:12 2013] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.910 [Sun Jun 9 06:31:12 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 7.77" [Sun Jun 9 09:22:01 2013] fullrun_pn_xmm0500670201_pi300-10000_cl_pass1_src3.ximg exists [Sun Jun 9 09:22:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500670201_pi300-10000_cl_pass1_src3.csv [Sun Jun 9 09:22:01 2013] fullrun_pn_xmm0500670201_pi300-10000_cl_pass1_src3_1.ximg exists [Sun Jun 9 09:22:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500670201_pi300-10000_cl_pass1_src3.csv [Sun Jun 9 09:22:01 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0500670201_pi300-10000_cl_pass1_src3_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0500670201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 09:22:02 2013] fullrun_pn_xmm0500670201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists [Sun Jun 9 09:22:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500670201_pi300-10000_cl_pass1_tfrozen_src3.csv [Sun Jun 9 09:22:02 2013] fullrun_pn_xmm0500670201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists [Sun Jun 9 09:22:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500670201_pi300-10000_cl_pass1_tfrozen_src3.csv [Sun Jun 9 09:22:02 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0500670201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0500670201_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 10:40:24 2013] Source 3 is offset by -2.971296 and 6.286566 pixels which is larger than 2 X fitted extent = 4.063053 x 4.063053, not incorporating fit results [Sun Jun 9 10:40:24 2013] Spatial fit model total counts = 5647.240000, observed total counts = 3888.000000 [Sun Jun 9 10:40:24 2013] Poor agreement between spatial fit and data for source 3 It may help to tweak spatial fit manually Not incorporating fit results [Sun Jun 9 10:40:25 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 10:40:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 10:40:25 2013] Assessing source extent using major [Sun Jun 9 10:40:25 2013] Source does appear to be extended [Sun Jun 9 10:40:25 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 10:40:38 2013] Counts = 1517.541870, rescaling region sizes by 2.000000 [Sun Jun 9 10:40:38 2013] XMMSAS src. selection expression = ellipse(25593.393280, 29109.151215, 1305.000000, 1305.000000, 0.000000, X, Y) [Sun Jun 9 10:40:38 2013] Writing source region out to fullrun_pn_xmm0500670201_pi300-10000_pass1_cl_src3_src.reg [Sun Jun 9 10:40:38 2013] Extracting stamp from image fullrun_pn_xmm0500670201_pi300-10000_cl_sm2.00.img.gz, (220, 260) - (370, 410) [Sun Jun 9 10:40:38 2013] XMMSAS bgd. selection expression = annulus(25593.393280, 29109.151215, 4350.000000, 8700.000000, X, Y) && !ellipse(30492.214220, 19048.952000, 2659.464077, 1318.502438, 357.816620, X, Y) && !ellipse(26055.595340, 27969.922600, 3416.256098, 3036.192087, 59.639000, X, Y) && !ellipse(31134.458008, 28852.404572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19797.498840, 33289.802826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28748.290253, 38064.687164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27475.026000, 30300.544000, 311.702409, 311.702409, 0.000000, X, Y) && !ellipse(26303.106506, 29585.768799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21659.466904, 28844.819153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17947.366898, 25628.686584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21922.041336, 38592.254761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26278.815643, 35044.737366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27084.540039, 30817.813904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24504.977295, 30221.438568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28739.077301, 28912.442749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28854.592316, 27443.237152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28638.589752, 26051.072540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24061.029846, 26225.072540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24528.994690, 25697.563354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27261.136658, 25544.158417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24963.997345, 24802.260925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25823.971954, 24587.641632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27520.748000, 25055.684000, 1121.632032, 1121.632032, 0.000000, X, Y) && !ellipse(27631.574000, 24435.406000, 2565.184074, 1578.808045, 229.217000, X, Y) && !ellipse(28634.788000, 22901.286000, 1343.216039, 1343.216039, 0.000000, X, Y) && !ellipse(28680.104000, 22565.230000, 1379.456040, 1379.456040, 0.000000, X, Y) && !ellipse(29095.498000, 22056.820000, 2686.432077, 2686.432077, 0.000000, X, Y) && !ellipse(29129.564000, 21847.914000, 1415.536041, 1415.536041, 0.000000, X, Y) && !ellipse(28940.024000, 21321.902000, 1459.768042, 1459.768042, 0.000000, X, Y) && !ellipse(29665.784000, 20720.034000, 1505.776043, 1505.776043, 0.000000, X, Y) && !ellipse(30135.394379, 20133.601654, 870.000000, 870.000000, 0.000000, X, Y) [Sun Jun 9 10:40:38 2013] Writing fullrun_pn_xmm0500670201_pi300-10000_pass1_cl_src3.gif [Sun Jun 9 11:00:35 2013] Mean detx,y = (57.70, -770.38) [Sun Jun 9 11:00:40 2013] Setting backscal keywords in source and bgd. spectrum [Sun Jun 9 11:02:44 2013] Binned source spectrum to 10 counts/bin [Sun Jun 9 11:02:45 2013] Setting source spectrum file to fullrun_pn_xmm0500670201_pi300-10000_pass1_cl_src3_src_b10.pi.gz [Sun Jun 9 11:02:45 2013] Setting bgd. spectrum file to fullrun_pn_xmm0500670201_pi300-10000_pass1_cl_src3_bgd.pi.gz [Sun Jun 9 11:48:32 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sun Jun 9 11:48:32 2013] rmf not generated due to insufficient counts [Sun Jun 9 14:24:34 2013] Updating aperture counts using extracted products [Sun Jun 9 14:24:34 2013] Total counts from fullrun_pn_xmm0500670201_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 42071.00 [Sun Jun 9 14:24:34 2013] Total counts from fullrun_pn_xmm0500670201_pi300-10000_pass1_cl_src3_bgd.pi.gz = 42328.00 [Sun Jun 9 14:24:34 2013] Got source and background scale factors 4395327.000000, 129122736.000000 [Sun Jun 9 14:24:34 2013] User source parameters: Position = (294.7, 335.1) = 17 20 11.83 26 38 24.7 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 40630.2 +/- 206.1 Background aperture counts = 1440.8 Rate = 2 +/- 0.009 [Sun Jun 9 14:24:34 2013] Updating counts from extracted products [Sun Jun 9 14:24:34 2013] Set source signif. to 40630.16/37.96 = 1070.39 [Sun Jun 9 14:24:42 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 9 14:24:42 2013] Using photon index=1.80, rate=1.79, arf fullrun_pn_xmm0500670201_pi300-10000_pass1_cl_src3.arf [Sun Jun 9 14:24:42 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 9 14:24:42 2013] Updating source flux to 4.8e-12 [Sun Jun 9 14:24:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun Jun 9 14:25:01 2013] xmm0500670201/analysis//spectral/fullrun_pn_xmm0500670201_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete