[Sun Jun  9 01:27:54 2013] Detection parameters:
  Position = (330.9, 332.9) = 17 20 0.10 26 38 19.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 152.9 +/- 20.3
  Background counts = 134.2
  Rate = 0.007 +/- 0.001

[Sun Jun  9 01:27:56 2013] Off-axis axis estimate = 3.43'
[Sun Jun  9 01:33:13 2013] Using EEF radius (= 8.14 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 01:33:13 2013] Initial guess for spatial extent in simple fitting = 8.14"
[Sun Jun  9 01:33:13 2013] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.711
[Sun Jun  9 01:33:13 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 8.14"
[Sun Jun  9 04:32:45 2013] fullrun_pn_xmm0500670201_pi300-10000_cl_pass0_src21.ximg exists
[Sun Jun  9 04:32:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500670201_pi300-10000_cl_pass0_src21.csv
[Sun Jun  9 04:32:45 2013] fullrun_pn_xmm0500670201_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun Jun  9 04:32:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500670201_pi300-10000_cl_pass0_src21.csv
[Sun Jun  9 04:32:45 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500670201_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500670201_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 04:32:46 2013] fullrun_pn_xmm0500670201_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun Jun  9 04:32:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500670201_pi300-10000_cl_pass0_tfrozen_src21.csv
[Sun Jun  9 04:32:46 2013] fullrun_pn_xmm0500670201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Jun  9 04:32:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500670201_pi300-10000_cl_pass0_tfrozen_src21.csv
[Sun Jun  9 04:32:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500670201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500670201_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 06:30:53 2013] Spatial fit model total counts = 1895.340000, observed total counts = 1519.000000
[Sun Jun  9 06:30:53 2013] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  9 06:30:54 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 06:30:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 06:30:54 2013] Assessing source extent using major
[Sun Jun  9 06:30:54 2013] Source does appear to be extended
[Sun Jun  9 06:30:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 06:31:12 2013] Using EEF radius (= 8.14 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 06:31:12 2013] Initial guess for spatial extent in simple fitting = 8.14"
[Sun Jun  9 06:31:12 2013] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.711
[Sun Jun  9 06:31:12 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 8.14"
[Sun Jun  9 09:22:01 2013] fullrun_pn_xmm0500670201_pi300-10000_cl_pass1_src19.ximg exists
[Sun Jun  9 09:22:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500670201_pi300-10000_cl_pass1_src19.csv
[Sun Jun  9 09:22:01 2013] fullrun_pn_xmm0500670201_pi300-10000_cl_pass1_src19_1.ximg exists
[Sun Jun  9 09:22:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500670201_pi300-10000_cl_pass1_src19.csv
[Sun Jun  9 09:22:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500670201_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500670201_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 09:22:02 2013] fullrun_pn_xmm0500670201_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sun Jun  9 09:22:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500670201_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sun Jun  9 09:22:02 2013] fullrun_pn_xmm0500670201_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sun Jun  9 09:22:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500670201_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sun Jun  9 09:22:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500670201_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500670201_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 10:40:24 2013] Spatial fit model total counts = 1898.100000, observed total counts = 1519.000000
[Sun Jun  9 10:40:24 2013] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  9 10:40:25 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 10:40:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 10:40:25 2013] Assessing source extent using major
[Sun Jun  9 10:40:25 2013] Source does appear to be extended
[Sun Jun  9 10:40:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 10:40:38 2013] XMMSAS src. selection expression = ellipse(28739.077301, 28912.442749, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  9 10:40:38 2013] Writing source region out to fullrun_pn_xmm0500670201_pi300-10000_pass1_cl_src23_src.reg
[Sun Jun  9 10:40:38 2013] Extracting stamp from image fullrun_pn_xmm0500670201_pi300-10000_cl_sm2.00.img.gz, (293, 295) - (368, 370)
[Sun Jun  9 10:40:38 2013] XMMSAS bgd. selection expression = annulus(28739.077301, 28912.442749, 1087.500000, 2175.000000, X, Y) && !ellipse(26055.595340, 27969.922600, 3416.256098, 3036.192087, 59.639000, X, Y) && !ellipse(31134.458008, 28852.404572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27475.026000, 30300.544000, 311.702409, 311.702409, 0.000000, X, Y) && !ellipse(26303.106506, 29585.768799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27084.540039, 30817.813904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28854.592316, 27443.237152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28638.589752, 26051.072540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27631.574000, 24435.406000, 2565.184074, 1578.808045, 229.217000, X, Y)
[Sun Jun  9 10:40:38 2013] Writing fullrun_pn_xmm0500670201_pi300-10000_pass1_cl_src23.gif
[Sun Jun  9 11:12:59 2013] Mean detx,y = (2678.91, 141.45) 
[Sun Jun  9 11:13:02 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  9 11:13:28 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  9 11:13:28 2013] Setting source spectrum file to fullrun_pn_xmm0500670201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sun Jun  9 11:13:28 2013] Setting bgd. spectrum file to fullrun_pn_xmm0500670201_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sun Jun  9 12:33:26 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun  9 12:33:26 2013] rmf not generated due to insufficient counts
[Sun Jun  9 14:24:37 2013] Updating aperture counts using extracted products
[Sun Jun  9 14:24:37 2013] Total counts from fullrun_pn_xmm0500670201_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 1049.00
[Sun Jun  9 14:24:37 2013] Total counts from fullrun_pn_xmm0500670201_pi300-10000_pass1_cl_src23_bgd.pi.gz = 1550.00
[Sun Jun  9 14:24:37 2013] Got source and background scale factors 1106909.000000, 3103853.000000
[Sun Jun  9 14:24:37 2013] User source parameters:
  Position = (330.9, 332.9) = 17 20 0.10 26 38 19.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 496.2 +/- 33.4
  Background aperture counts = 552.8
  Rate = 0.02 +/- 0.001

[Sun Jun  9 14:24:37 2013] Updating counts from extracted products
[Sun Jun  9 14:24:37 2013] Set source signif. to 496.23/23.51 = 21.11
[Sun Jun  9 14:24:42 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 14:24:42 2013] Using photon index=1.80, rate=0.0219, arf fullrun_pn_xmm0500670201_pi300-10000_pass1_cl_src23.arf
[Sun Jun  9 14:24:42 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 14:24:42 2013] Updating source flux to 6.2e-14
[Sun Jun  9 14:24:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  9 14:25:01 2013] xmm0500670201/analysis//spectral/fullrun_pn_xmm0500670201_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete