[Sun Jun  9 01:29:20 2013] Detection parameters:
  Position = (440.9, 263.0) = 17 19 24.45 26 33 12.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.2 +/- 13.0
  Background counts = 36.4
  Rate = 0.004 +/- 0.0008

[Sun Jun  9 01:29:20 2013] Off-axis axis estimate = 10.64'
[Sun Jun  9 05:15:48 2013] Using EEF radius (= 11.75 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 05:15:48 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  9 05:15:48 2013] Initial guess for spatial extent in simple fitting = 11.75"
[Sun Jun  9 05:15:48 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.878
[Sun Jun  9 05:15:48 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 11.75"
[Sun Jun  9 06:30:41 2013] fullrun_mos2_xmm0500670201_pi300-10000_cl_pass0_src10.ximg exists
[Sun Jun  9 06:30:41 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0500670201_pi300-10000_cl_pass0_src10.csv
[Sun Jun  9 06:30:41 2013] fullrun_mos2_xmm0500670201_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun Jun  9 06:30:41 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0500670201_pi300-10000_cl_pass0_src10.csv
[Sun Jun  9 06:30:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500670201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500670201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 06:30:41 2013] fullrun_mos2_xmm0500670201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun Jun  9 06:30:41 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0500670201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun Jun  9 06:30:41 2013] fullrun_mos2_xmm0500670201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Jun  9 06:30:41 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0500670201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun Jun  9 06:30:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500670201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500670201_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 06:31:02 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 15.400077 pixels away
[Sun Jun  9 06:31:02 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 06:31:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 06:31:02 2013] Assessing source extent using major
[Sun Jun  9 06:31:02 2013] Source does appear to be extended
[Sun Jun  9 06:31:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 06:31:02 2013] Deleting source due to low Poisson probability 0.9