[Sun Jun  9 01:29:20 2013] Detection parameters:
  Position = (291.8, 288.2) = 17 20 12.79 26 34 59.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.5 +/- 16.7
  Background counts = 77.7
  Rate = 0.003 +/- 0.0006

[Sun Jun  9 01:29:20 2013] Off-axis axis estimate = 0.89'
[Sun Jun  9 05:15:48 2013] Using EEF radius (= 6.87 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 05:15:48 2013] Initial guess for spatial extent in simple fitting = 6.87"
[Sun Jun  9 05:15:48 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.925
[Sun Jun  9 05:15:48 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 6.87"
[Sun Jun  9 06:30:41 2013] fullrun_mos2_xmm0500670201_pi300-10000_cl_pass0_src23.ximg exists
[Sun Jun  9 06:30:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500670201_pi300-10000_cl_pass0_src23.csv
[Sun Jun  9 06:30:41 2013] fullrun_mos2_xmm0500670201_pi300-10000_cl_pass0_src23_1.ximg exists
[Sun Jun  9 06:30:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500670201_pi300-10000_cl_pass0_src23.csv
[Sun Jun  9 06:30:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500670201_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500670201_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 06:30:41 2013] fullrun_mos2_xmm0500670201_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sun Jun  9 06:30:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500670201_pi300-10000_cl_pass0_tfrozen_src23.csv
[Sun Jun  9 06:30:41 2013] fullrun_mos2_xmm0500670201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sun Jun  9 06:30:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500670201_pi300-10000_cl_pass0_tfrozen_src23.csv
[Sun Jun  9 06:30:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500670201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500670201_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 06:31:02 2013] Source 26 is offset by -6.551808 and 5.501667 pixels which is larger than
2 X fitted extent = 0.789885 x 0.789885, not incorporating fit results
[Sun Jun  9 06:31:02 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 06:31:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 06:31:02 2013] Assessing source extent using major
[Sun Jun  9 06:31:02 2013] Source does appear to be extended
[Sun Jun  9 06:31:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 06:31:02 2013] Deleting source due to low Poisson probability 1.0