[Sun Jun  9 01:28:35 2013] Detection parameters:
  Position = (215.9, 304.8) = 17 20 37.40 26 36 15.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.7 +/- 11.4
  Background counts = 37.2
  Rate = 0.002 +/- 0.0006

[Sun Jun  9 01:28:36 2013] Off-axis axis estimate = 6.00'
[Sun Jun  9 04:32:48 2013] Using EEF radius (= 9.43 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 04:32:48 2013] Initial guess for spatial extent in simple fitting = 9.43"
[Sun Jun  9 04:32:48 2013] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.054
[Sun Jun  9 04:32:48 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 9.43"
[Sun Jun  9 05:15:48 2013] fullrun_mos1_xmm0500670201_pi300-10000_cl_pass0_src21.ximg exists
[Sun Jun  9 05:15:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500670201_pi300-10000_cl_pass0_src21.csv
[Sun Jun  9 05:15:48 2013] fullrun_mos1_xmm0500670201_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun Jun  9 05:15:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500670201_pi300-10000_cl_pass0_src21.csv
[Sun Jun  9 05:15:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500670201_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500670201_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 05:15:48 2013] fullrun_mos1_xmm0500670201_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun Jun  9 05:15:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500670201_pi300-10000_cl_pass0_tfrozen_src21.csv
[Sun Jun  9 05:15:48 2013] fullrun_mos1_xmm0500670201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Jun  9 05:15:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500670201_pi300-10000_cl_pass0_tfrozen_src21.csv
[Sun Jun  9 05:15:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500670201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500670201_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 06:30:57 2013] Source 19 is offset by 7.448632 and 6.348220 pixels which is larger than
2 X fitted extent = 1.083816 x 1.083816, not incorporating fit results
[Sun Jun  9 06:30:57 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 06:30:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 06:30:57 2013] Assessing source extent using major
[Sun Jun  9 06:30:57 2013] Source does appear to be extended
[Sun Jun  9 06:30:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 06:30:57 2013] Deleting source due to low Poisson probability 0.8