[Mon Dec 19 02:33:27 2011] Detection parameters:
  Position = (282.3, 307.3) = 15 9 26.81 -58 50 59.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 203.5 +/- 19.4
  Background counts = 36.0
  Rate = 0.004 +/- 0.0004

[Mon Dec 19 02:33:27 2011] Off-axis axis estimate = 1.33'
[Mon Dec 19 03:06:48 2011] Using EEF radius (= 7.10 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 03:06:48 2011] Initial guess for spatial extent in simple fitting = 7.10"
[Mon Dec 19 03:06:48 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.881
[Mon Dec 19 03:06:48 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.10"
[Mon Dec 19 03:21:29 2011] fullrun_mos2_xmm0500630301_pi300-10000_cl_pass0_src1.ximg exists
[Mon Dec 19 03:21:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500630301_pi300-10000_cl_pass0_src1.csv
[Mon Dec 19 03:21:29 2011] fullrun_mos2_xmm0500630301_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Dec 19 03:21:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500630301_pi300-10000_cl_pass0_src1.csv
[Mon Dec 19 03:21:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500630301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500630301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 03:21:29 2011] fullrun_mos2_xmm0500630301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Dec 19 03:21:29 2011] fullrun_mos2_xmm0500630301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Dec 19 03:21:29 2011] Fit fullrun_mos2_xmm0500630301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Dec 19 03:21:35 2011] Source 6 is offset by 6.641763 and -6.177692 pixels which is larger than
2 X fitted extent = 0.815591 x 0.815591, not incorporating fit results
[Mon Dec 19 03:21:35 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 03:21:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 03:21:35 2011] Assessing source extent using major
[Mon Dec 19 03:21:35 2011] Source does appear to be extended
[Mon Dec 19 03:21:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 03:49:43 2011] Using EEF radius (= 7.10 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 03:49:43 2011] Initial guess for spatial extent in simple fitting = 7.10"
[Mon Dec 19 03:49:43 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.881
[Mon Dec 19 03:49:43 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.10"
[Mon Dec 19 04:02:53 2011] fullrun_mos2_xmm0500630301_pi300-10000_cl_pass1_src1.ximg exists
[Mon Dec 19 04:02:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500630301_pi300-10000_cl_pass1_src1.csv
[Mon Dec 19 04:02:53 2011] fullrun_mos2_xmm0500630301_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Dec 19 04:02:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500630301_pi300-10000_cl_pass1_src1.csv
[Mon Dec 19 04:02:53 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500630301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500630301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 04:02:53 2011] fullrun_mos2_xmm0500630301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Dec 19 04:02:53 2011] fullrun_mos2_xmm0500630301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Dec 19 04:02:53 2011] Fit fullrun_mos2_xmm0500630301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Dec 19 04:03:04 2011] Source 6 is offset by 6.595441 and -6.163026 pixels which is larger than
2 X fitted extent = 0.815591 x 0.815591, not incorporating fit results
[Mon Dec 19 04:03:04 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 04:03:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 04:03:04 2011] Assessing source extent using major
[Mon Dec 19 04:03:04 2011] Source does appear to be extended
[Mon Dec 19 04:03:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 04:47:56 2011] XMMSAS src. selection expression = ellipse(24510.279388, 26682.528778, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec 19 04:47:56 2011] Writing source region out to fullrun_mos2_xmm0500630301_pi300-10000_pass1_cl_src6_src.reg
[Mon Dec 19 04:47:56 2011] Extracting stamp from image fullrun_mos2_xmm0500630301_pi300-10000_cl_sm2.00.img.gz, (245, 270) - (320, 345)
[Mon Dec 19 04:47:57 2011] XMMSAS bgd. selection expression = annulus(24510.279388, 26682.528778, 1087.500000, 2175.000000, X, Y) && !ellipse(27059.985000, 28987.653000, 401.487212, 198.485606, 358.807460, X, Y)
[Mon Dec 19 04:47:57 2011] Writing fullrun_mos2_xmm0500630301_pi300-10000_pass1_cl_src6.gif
[Mon Dec 19 04:48:00 2011] Mean detx,y = (251.98, -2903.53) 
[Mon Dec 19 04:48:01 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 19 04:48:09 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 19 04:48:09 2011] Setting source spectrum file to fullrun_mos2_xmm0500630301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Dec 19 04:48:09 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0500630301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Mon Dec 19 04:50:15 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Dec 19 04:50:15 2011] rmf not generated due to insufficient counts
[Mon Dec 19 04:51:38 2011] Updating aperture counts using extracted products
[Mon Dec 19 04:51:38 2011] Error reading totcts from fullrun_mos2_xmm0500630301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Dec 19 04:51:39 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 04:51:39 2011] Using photon index=1.80, rate=0.00437, arf fullrun_mos2_xmm0500630301_pi300-10000_pass1_cl_src6.arf
[Mon Dec 19 04:51:39 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 04:51:39 2011] Updating source flux to 4.3e-14
[Mon Dec 19 04:51:49 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Dec 19 04:51:50 2011] xmm0500630301/analysis//spectral/fullrun_mos2_xmm0500630301_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete