[Mon Dec 19 02:33:27 2011] Detection parameters: Position = (293.0, 87.5) = 15 9 20.85 -59 6 57.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 67.5 +/- 12.6 Background counts = 22.2 Rate = 0.001 +/- 0.0003 [Mon Dec 19 02:33:27 2011] Off-axis axis estimate = 15.30' [Mon Dec 19 03:06:48 2011] Using EEF radius (= 14.08 ")to estimate initial spatial extent for simple fitting [Mon Dec 19 03:06:48 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Mon Dec 19 03:06:48 2011] Initial guess for spatial extent in simple fitting = 14.08" [Mon Dec 19 03:06:48 2011] source mask rpix=3.2, npix_max = 55, mask sum = 54, frac = 0.967 [Mon Dec 19 03:06:48 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 14.08" [Mon Dec 19 03:21:29 2011] fullrun_mos2_xmm0500630301_pi300-10000_cl_pass0_src8.ximg exists [Mon Dec 19 03:21:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500630301_pi300-10000_cl_pass0_src8.csv [Mon Dec 19 03:21:29 2011] fullrun_mos2_xmm0500630301_pi300-10000_cl_pass0_src8_1.ximg exists [Mon Dec 19 03:21:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500630301_pi300-10000_cl_pass0_src8.csv [Mon Dec 19 03:21:29 2011] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0500630301_pi300-10000_cl_pass0_src8_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0500630301_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Dec 19 03:21:29 2011] fullrun_mos2_xmm0500630301_pi300-10000_cl_pass0_tfrozen_src8.ximg exists [Mon Dec 19 03:21:29 2011] fullrun_mos2_xmm0500630301_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists [Mon Dec 19 03:21:29 2011] Fit fullrun_mos2_xmm0500630301_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly [Mon Dec 19 03:21:35 2011] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 18.686449 pixels away [Mon Dec 19 03:21:35 2011] Vigneting correction estimate = 1.000000 [Mon Dec 19 03:21:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Dec 19 03:21:35 2011] Assessing source extent using major [Mon Dec 19 03:21:35 2011] Source does appear to be extended [Mon Dec 19 03:21:35 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Dec 19 03:49:43 2011] Using EEF radius (= 14.08 ")to estimate initial spatial extent for simple fitting [Mon Dec 19 03:49:43 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Mon Dec 19 03:49:43 2011] Initial guess for spatial extent in simple fitting = 14.08" [Mon Dec 19 03:49:43 2011] source mask rpix=3.2, npix_max = 55, mask sum = 54, frac = 0.967 [Mon Dec 19 03:49:43 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 14.08" [Mon Dec 19 04:02:53 2011] fullrun_mos2_xmm0500630301_pi300-10000_cl_pass1_src8.ximg exists [Mon Dec 19 04:02:53 2011] fullrun_mos2_xmm0500630301_pi300-10000_cl_pass1_src8_1.ximg exists [Mon Dec 19 04:02:53 2011] Fit fullrun_mos2_xmm0500630301_pi300-10000_cl_pass1_src8 appears to have run properly [Mon Dec 19 04:02:53 2011] fullrun_mos2_xmm0500630301_pi300-10000_cl_pass1_tfrozen_src8.ximg exists [Mon Dec 19 04:02:53 2011] fullrun_mos2_xmm0500630301_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists [Mon Dec 19 04:02:53 2011] Fit fullrun_mos2_xmm0500630301_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly [Mon Dec 19 04:03:04 2011] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 12.817670 pixels away [Mon Dec 19 04:03:04 2011] Vigneting correction estimate = 1.000000 [Mon Dec 19 04:03:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Dec 19 04:03:04 2011] Assessing source extent using major [Mon Dec 19 04:03:04 2011] Source does appear to be extended [Mon Dec 19 04:03:04 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Dec 19 04:47:57 2011] XMMSAS src. selection expression = ellipse(25440.038788, 7563.656837, 652.500000, 652.500000, 0.000000, X, Y) [Mon Dec 19 04:47:57 2011] Writing source region out to fullrun_mos2_xmm0500630301_pi300-10000_pass1_cl_src10_src.reg [Mon Dec 19 04:47:57 2011] Extracting stamp from image fullrun_mos2_xmm0500630301_pi300-10000_cl_sm2.00.img.gz, (255, 50) - (330, 125) [Mon Dec 19 04:47:57 2011] XMMSAS bgd. selection expression = annulus(25440.038788, 7563.656837, 1087.500000, 2175.000000, X, Y) [Mon Dec 19 04:47:57 2011] Writing fullrun_mos2_xmm0500630301_pi300-10000_pass1_cl_src10.gif [Mon Dec 19 04:49:32 2011] Mean detx,y = (-7226.55, 14664.17) [Mon Dec 19 04:49:33 2011] Setting backscal keywords in source and bgd. spectrum [Mon Dec 19 04:49:51 2011] Binned source spectrum to 10 counts/bin [Mon Dec 19 04:49:51 2011] Setting source spectrum file to fullrun_mos2_xmm0500630301_pi300-10000_pass1_cl_src10_src_b10.pi.gz [Mon Dec 19 04:49:51 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0500630301_pi300-10000_pass1_cl_src10_bgd.pi.gz [Mon Dec 19 04:50:30 2011] Not generating rmf since there are only 67 counts [Mon Dec 19 04:50:30 2011] rmf not generated due to insufficient counts [Mon Dec 19 04:51:39 2011] Updating aperture counts using extracted products [Mon Dec 19 04:51:39 2011] Error reading totcts from fullrun_mos2_xmm0500630301_pi300-10000_pass1_cl_src10_src_b10.pi.gz [Mon Dec 19 04:51:39 2011] Calculating source flux in energy range 0.30-8.00 [Mon Dec 19 04:51:39 2011] Using photon index=1.80, rate=0.00138, arf fullrun_mos2_xmm0500630301_pi300-10000_pass1_cl_src10.arf [Mon Dec 19 04:51:39 2011] Assuming count rate is from the 0.30-10.00 bandpass [Mon Dec 19 04:51:39 2011] Updating source flux to 4.5e-14 [Mon Dec 19 04:51:49 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon Dec 19 04:51:50 2011] xmm0500630301/analysis//spectral/fullrun_mos2_xmm0500630301_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete