[Sun Feb 26 10:38:40 2012] Detection parameters:
  Position = (316.5, 347.1) = 15 9 3.46 -58 48 19.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 260.2 +/- 21.5
  Background counts = 42.7
  Rate = 0.01 +/- 0.001

[Sun Feb 26 10:38:41 2012] Off-axis axis estimate = 3.76'
[Sun Feb 26 10:41:58 2012] Using EEF radius (= 8.31 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 10:41:58 2012] Initial guess for spatial extent in simple fitting = 8.31"
[Sun Feb 26 10:41:58 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.076
[Sun Feb 26 10:41:58 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 8.31"
[Sun Feb 26 11:15:40 2012] fullrun_pn_xmm0500630101_pi300-10000_cl_pass0_src4.ximg exists
[Sun Feb 26 11:15:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500630101_pi300-10000_cl_pass0_src4.csv
[Sun Feb 26 11:15:40 2012] fullrun_pn_xmm0500630101_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Feb 26 11:15:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500630101_pi300-10000_cl_pass0_src4.csv
[Sun Feb 26 11:15:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500630101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500630101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 11:15:40 2012] fullrun_pn_xmm0500630101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Feb 26 11:15:40 2012] fullrun_pn_xmm0500630101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Feb 26 11:15:40 2012] Fit fullrun_pn_xmm0500630101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sun Feb 26 11:37:43 2012] Source 4 is offset by -7.149308 and 6.750993 pixels which is larger than
2 X fitted extent = 0.955223 x 0.955223, not incorporating fit results
[Sun Feb 26 11:37:43 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 11:37:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 11:37:43 2012] Assessing source extent using major
[Sun Feb 26 11:37:43 2012] Source does appear to be extended
[Sun Feb 26 11:37:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 11:37:53 2012] Using EEF radius (= 8.31 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 11:37:53 2012] Initial guess for spatial extent in simple fitting = 8.31"
[Sun Feb 26 11:37:53 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.076
[Sun Feb 26 11:37:53 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 8.31"
[Sun Feb 26 12:09:48 2012] fullrun_pn_xmm0500630101_pi300-10000_cl_pass1_src4.ximg exists
[Sun Feb 26 12:09:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500630101_pi300-10000_cl_pass1_src4.csv
[Sun Feb 26 12:09:48 2012] fullrun_pn_xmm0500630101_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun Feb 26 12:09:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500630101_pi300-10000_cl_pass1_src4.csv
[Sun Feb 26 12:09:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500630101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500630101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 12:09:48 2012] fullrun_pn_xmm0500630101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun Feb 26 12:09:48 2012] fullrun_pn_xmm0500630101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Feb 26 12:09:48 2012] Fit fullrun_pn_xmm0500630101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sun Feb 26 12:28:16 2012] Source 4 is offset by -7.149308 and 6.750993 pixels which is larger than
2 X fitted extent = 0.955223 x 0.955223, not incorporating fit results
[Sun Feb 26 12:28:16 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 12:28:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 12:28:16 2012] Assessing source extent using major
[Sun Feb 26 12:28:16 2012] Source does appear to be extended
[Sun Feb 26 12:28:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 12:28:26 2012] XMMSAS src. selection expression = ellipse(27486.344208, 30150.002350, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Feb 26 12:28:26 2012] Writing source region out to fullrun_pn_xmm0500630101_pi300-10000_pass1_cl_src4_src.reg
[Sun Feb 26 12:28:26 2012] Extracting stamp from image fullrun_pn_xmm0500630101_pi300-10000_cl_sm2.00.img.gz, (279, 310) - (354, 385)
[Sun Feb 26 12:28:26 2012] XMMSAS bgd. selection expression = annulus(27486.344208, 30150.002350, 1087.500000, 2175.000000, X, Y) && !ellipse(26350.342800, 29207.809400, 319.184009, 319.184009, 0.000000, X, Y) && !ellipse(28200.878967, 31235.370361, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Feb 26 12:28:26 2012] Writing fullrun_pn_xmm0500630101_pi300-10000_pass1_cl_src4.gif
[Sun Feb 26 12:31:42 2012] Mean detx,y = (-3143.72, 5440.17) 
[Sun Feb 26 12:31:47 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 26 12:32:26 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 26 12:32:27 2012] Setting source spectrum file to fullrun_pn_xmm0500630101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Feb 26 12:32:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0500630101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Feb 26 12:50:02 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Feb 26 12:50:02 2012] rmf not generated due to insufficient counts
[Sun Feb 26 13:11:01 2012] Updating aperture counts using extracted products
[Sun Feb 26 13:11:01 2012] Error reading totcts from fullrun_pn_xmm0500630101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Feb 26 13:11:02 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 13:11:02 2012] Using photon index=1.80, rate=0.0136, arf fullrun_pn_xmm0500630101_pi300-10000_pass1_cl_src4.arf
[Sun Feb 26 13:11:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 13:11:02 2012] Updating source flux to 4.8e-14
[Sun Feb 26 13:11:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting