[Wed Feb 22 10:37:00 2012] Detection parameters:
  Position = (352.9, 326.7) = 21 14 41.80 6 8 36.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.4 +/- 14.3
  Background counts = 58.2
  Rate = 0.004 +/- 0.0005

[Wed Feb 22 10:37:02 2012] Off-axis axis estimate = 4.45'
[Wed Feb 22 10:42:52 2012] Using EEF radius (= 8.65 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 10:42:52 2012] Initial guess for spatial extent in simple fitting = 8.65"
[Wed Feb 22 10:42:52 2012] source mask rpix=2.0, npix_max = 24, mask sum = 16, frac = 0.646
[Wed Feb 22 10:42:52 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 8.65"
[Wed Feb 22 13:18:25 2012] fullrun_pn_xmm0500500901_pi300-10000_cl_pass0_src23.ximg exists
[Wed Feb 22 13:18:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500500901_pi300-10000_cl_pass0_src23.csv
[Wed Feb 22 13:18:25 2012] fullrun_pn_xmm0500500901_pi300-10000_cl_pass0_src23_1.ximg exists
[Wed Feb 22 13:18:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500500901_pi300-10000_cl_pass0_src23.csv
[Wed Feb 22 13:18:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500500901_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500500901_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 13:18:26 2012] fullrun_pn_xmm0500500901_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Wed Feb 22 13:18:26 2012] fullrun_pn_xmm0500500901_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Wed Feb 22 13:18:26 2012] Fit fullrun_pn_xmm0500500901_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Wed Feb 22 15:48:32 2012] Source 23 is offset by -7.062668 and 4.631458 pixels which is larger than
2 X fitted extent = 3.596676 x 3.596676, not incorporating fit results
[Wed Feb 22 15:48:32 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 15:48:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 15:48:32 2012] Assessing source extent using major
[Wed Feb 22 15:48:32 2012] Source does appear to be extended
[Wed Feb 22 15:48:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 15:49:11 2012] Using EEF radius (= 8.65 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 15:49:11 2012] Initial guess for spatial extent in simple fitting = 8.65"
[Wed Feb 22 15:49:11 2012] source mask rpix=2.0, npix_max = 24, mask sum = 16, frac = 0.646
[Wed Feb 22 15:49:11 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 8.65"
[Wed Feb 22 18:03:40 2012] fullrun_pn_xmm0500500901_pi300-10000_cl_pass1_src21.ximg exists
[Wed Feb 22 18:03:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500500901_pi300-10000_cl_pass1_src21.csv
[Wed Feb 22 18:03:40 2012] fullrun_pn_xmm0500500901_pi300-10000_cl_pass1_src21_1.ximg exists
[Wed Feb 22 18:03:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500500901_pi300-10000_cl_pass1_src21.csv
[Wed Feb 22 18:03:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500500901_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500500901_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 18:03:40 2012] fullrun_pn_xmm0500500901_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Wed Feb 22 18:03:40 2012] fullrun_pn_xmm0500500901_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Wed Feb 22 18:03:40 2012] Fit fullrun_pn_xmm0500500901_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Wed Feb 22 19:59:34 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 30.797912 pixels away
[Wed Feb 22 19:59:34 2012] Spatial fit model total counts = 547.993000, observed total counts = 548.000000
[Wed Feb 22 19:59:34 2012] Offset between fit and detection position for source 23 = 0.823985 pixels
[Wed Feb 22 19:59:34 2012] 524.294400 total counts/ 453.713000 bgd. counts: snr = 3.313597
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.823985 pixels
  Position = (352.1, 326.9) = 21 14 42.03 6 8 36.9
  Extent = 4.7 (3.8-5.9)", rotation angle = 0
  Source counts = 70.6 +/- 22.9
  Background counts = 453.7
  Rate = 0.001 +/- 0.0005
[Wed Feb 22 19:59:35 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 19:59:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 19:59:35 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 19:59:35 2012] Source does appear to be extended
[Wed Feb 22 19:59:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 20:00:15 2012] XMMSAS src. selection expression = ellipse(30583.029000, 28387.548080, 284.561408, 284.561408, 0.000000, X, Y)
[Wed Feb 22 20:00:15 2012] Writing source region out to fullrun_pn_xmm0500500901_pi300-10000_pass1_cl_src23_src.reg
[Wed Feb 22 20:00:15 2012] Extracting stamp from image fullrun_pn_xmm0500500901_pi300-10000_cl_sm2.00.img.gz, (336, 310) - (368, 343)
[Wed Feb 22 20:00:15 2012] XMMSAS bgd. selection expression = annulus(30583.029000, 28387.548080, 474.269014, 948.538027, X, Y) && !ellipse(29330.108000, 30476.739400, 1424.320041, 764.879222, 112.898633, X, Y)
[Wed Feb 22 20:00:15 2012] Writing fullrun_pn_xmm0500500901_pi300-10000_pass1_cl_src23.gif
[Wed Feb 22 20:33:59 2012] Mean detx,y = (2812.58, -2098.87) 
[Wed Feb 22 20:34:07 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 20:34:34 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 20:34:35 2012] Setting source spectrum file to fullrun_pn_xmm0500500901_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Wed Feb 22 20:34:35 2012] Setting bgd. spectrum file to fullrun_pn_xmm0500500901_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Wed Feb 22 21:46:41 2012] Not generating rmf since there are only 70 counts
[Wed Feb 22 21:46:41 2012] rmf not generated due to insufficient counts
[Thu Feb 23 00:09:26 2012] Updating aperture counts using extracted products
[Thu Feb 23 00:09:26 2012] Error reading totcts from fullrun_pn_xmm0500500901_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu Feb 23 00:09:29 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 00:09:29 2012] Using photon index=1.80, rate=0.00142, arf fullrun_pn_xmm0500500901_pi300-10000_pass1_cl_src23.arf
[Thu Feb 23 00:09:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 00:09:30 2012] Updating source flux to 5.5e-15
[Thu Feb 23 00:12:13 2012] Flag b found in src. 23 procflags, skipping spectral fitting
[Thu Feb 23 00:12:13 2012] Source 23 has fewer than 100.000000 counts, skipping spectral fitting