[Wed Feb 22 10:36:59 2012] Detection parameters:
  Position = (239.9, 355.8) = 21 15 14.76 6 10 44.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.3 +/- 14.9
  Background counts = 57.3
  Rate = 0.004 +/- 0.0006

[Wed Feb 22 10:37:02 2012] Off-axis axis estimate = 5.94'
[Wed Feb 22 10:42:52 2012] Using EEF radius (= 9.40 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 10:42:52 2012] Initial guess for spatial extent in simple fitting = 9.40"
[Wed Feb 22 10:42:52 2012] source mask rpix=2.2, npix_max = 28, mask sum = 23, frac = 0.812
[Wed Feb 22 10:42:52 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 9.40"
[Wed Feb 22 13:18:25 2012] fullrun_pn_xmm0500500901_pi300-10000_cl_pass0_src18.ximg exists
[Wed Feb 22 13:18:25 2012] fullrun_pn_xmm0500500901_pi300-10000_cl_pass0_src18_1.ximg exists
[Wed Feb 22 13:18:25 2012] Fit fullrun_pn_xmm0500500901_pi300-10000_cl_pass0_src18 appears to have run properly
[Wed Feb 22 13:18:26 2012] fullrun_pn_xmm0500500901_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Wed Feb 22 13:18:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500500901_pi300-10000_cl_pass0_tfrozen_src18.csv
[Wed Feb 22 13:18:26 2012] fullrun_pn_xmm0500500901_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Feb 22 13:18:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500500901_pi300-10000_cl_pass0_tfrozen_src18.csv
[Wed Feb 22 13:18:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500500901_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500500901_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 15:48:32 2012] Source 18 is offset by 8.939784 and -4.365416 pixels which is larger than
2 X fitted extent = 1.981182 x 8.643495, not incorporating fit results
[Wed Feb 22 15:48:32 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 15:48:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 15:48:32 2012] Assessing source extent using major
[Wed Feb 22 15:48:32 2012] Source does appear to be extended
[Wed Feb 22 15:48:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 15:49:11 2012] Using EEF radius (= 9.40 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 15:49:11 2012] Initial guess for spatial extent in simple fitting = 9.40"
[Wed Feb 22 15:49:11 2012] source mask rpix=2.2, npix_max = 28, mask sum = 23, frac = 0.812
[Wed Feb 22 15:49:11 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 9.40"
[Wed Feb 22 18:03:40 2012] fullrun_pn_xmm0500500901_pi300-10000_cl_pass1_src16.ximg exists
[Wed Feb 22 18:03:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500500901_pi300-10000_cl_pass1_src16.csv
[Wed Feb 22 18:03:40 2012] fullrun_pn_xmm0500500901_pi300-10000_cl_pass1_src16_1.ximg exists
[Wed Feb 22 18:03:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500500901_pi300-10000_cl_pass1_src16.csv
[Wed Feb 22 18:03:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500500901_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500500901_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 18:03:40 2012] fullrun_pn_xmm0500500901_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Wed Feb 22 18:03:40 2012] fullrun_pn_xmm0500500901_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Wed Feb 22 18:03:40 2012] Fit fullrun_pn_xmm0500500901_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Wed Feb 22 19:59:34 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 50.596176 pixels away
[Wed Feb 22 19:59:34 2012] Spatial fit model total counts = 503.999000, observed total counts = 504.000000
[Wed Feb 22 19:59:34 2012] Offset between fit and detection position for source 18 = 0.116031 pixels
[Wed Feb 22 19:59:34 2012] 521.483900 total counts/ 444.347000 bgd. counts: snr = 3.659326
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.116031 pixels
  Position = (239.9, 355.7) = 21 15 14.75 6 10 42.3
  Extent = 4.3 (3.5-5.4)", rotation angle = 0
  Source counts = 77.1 +/- 22.8
  Background counts = 444.3
  Rate = 0.002 +/- 0.0005
[Wed Feb 22 19:59:35 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 19:59:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 19:59:35 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 19:59:35 2012] Source does appear to be extended
[Wed Feb 22 19:59:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 20:00:15 2012] XMMSAS src. selection expression = ellipse(20822.934400, 30895.547600, 255.258607, 255.258607, 0.000000, X, Y)
[Wed Feb 22 20:00:15 2012] Writing source region out to fullrun_pn_xmm0500500901_pi300-10000_pass1_cl_src18_src.reg
[Wed Feb 22 20:00:15 2012] Extracting stamp from image fullrun_pn_xmm0500500901_pi300-10000_cl_sm2.00.img.gz, (225, 341) - (255, 370)
[Wed Feb 22 20:00:15 2012] XMMSAS bgd. selection expression = annulus(20822.934400, 30895.547600, 425.431012, 850.862024, X, Y)
[Wed Feb 22 20:00:15 2012] Writing fullrun_pn_xmm0500500901_pi300-10000_pass1_cl_src18.gif
[Wed Feb 22 20:27:54 2012] Mean detx,y = (-7244.98, -2044.74) 
[Wed Feb 22 20:28:01 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 20:28:23 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 20:28:24 2012] Setting source spectrum file to fullrun_pn_xmm0500500901_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Feb 22 20:28:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0500500901_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Wed Feb 22 21:39:19 2012] Not generating rmf since there are only 77 counts
[Wed Feb 22 21:39:19 2012] rmf not generated due to insufficient counts
[Thu Feb 23 00:09:26 2012] Updating aperture counts using extracted products
[Thu Feb 23 00:09:26 2012] Error reading totcts from fullrun_pn_xmm0500500901_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu Feb 23 00:09:29 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 00:09:29 2012] Using photon index=1.80, rate=0.00155, arf fullrun_pn_xmm0500500901_pi300-10000_pass1_cl_src18.arf
[Thu Feb 23 00:09:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 00:09:29 2012] Updating source flux to 8.7e-15
[Thu Feb 23 00:12:13 2012] Flag b found in src. 18 procflags, skipping spectral fitting
[Thu Feb 23 00:12:13 2012] Source 18 has fewer than 100.000000 counts, skipping spectral fitting