[Wed Feb 22 10:36:59 2012] Detection parameters:
  Position = (263.4, 309.3) = 21 15 7.91 6 7 21.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1604.2 +/- 48.5
  Background counts = 61.2
  Rate = 0.05 +/- 0.001

[Wed Feb 22 10:37:02 2012] Off-axis axis estimate = 2.66'
[Wed Feb 22 10:42:52 2012] Using EEF radius (= 7.76 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 10:42:52 2012] Initial guess for spatial extent in simple fitting = 7.76"
[Wed Feb 22 10:42:52 2012] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.198
[Wed Feb 22 10:42:52 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.76"
[Wed Feb 22 13:18:24 2012] fullrun_pn_xmm0500500901_pi300-10000_cl_pass0_src1.ximg exists
[Wed Feb 22 13:18:24 2012] fullrun_pn_xmm0500500901_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Feb 22 13:18:24 2012] Fit fullrun_pn_xmm0500500901_pi300-10000_cl_pass0_src1 appears to have run properly
[Wed Feb 22 13:18:25 2012] fullrun_pn_xmm0500500901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Feb 22 13:18:25 2012] fullrun_pn_xmm0500500901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Feb 22 13:18:25 2012] Fit fullrun_pn_xmm0500500901_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Feb 22 15:48:32 2012] Spatial fit model total counts = 2035.780000, observed total counts = 2031.000000
[Wed Feb 22 15:48:32 2012] Offset between fit and detection position for source 1 = 0.210649 pixels
[Wed Feb 22 15:48:32 2012] 2018.702000 total counts/ 776.302000 bgd. counts: snr = 44.590885
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.210649 pixels
  Position = (263.3, 309.5) = 21 15 7.92 6 7 21.3
  Extent = 5.8 (5.5-6.0)", rotation angle = 0
  Source counts = 1242.4 +/- 44.9
  Background counts = 776.3
  Rate = 0.03 +/- 0.0009
[Wed Feb 22 15:48:32 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 15:48:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 15:48:32 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 15:48:32 2012] Source does appear to be extended
[Wed Feb 22 15:48:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 15:49:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 22 15:49:11 2012] Initial guess for spatial extent in simple fitting = 5.82"
[Wed Feb 22 15:49:11 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.889
[Wed Feb 22 15:49:11 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.82"
[Wed Feb 22 18:03:39 2012] fullrun_pn_xmm0500500901_pi300-10000_cl_pass1_src1.ximg exists
[Wed Feb 22 18:03:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500500901_pi300-10000_cl_pass1_src1.csv
[Wed Feb 22 18:03:39 2012] fullrun_pn_xmm0500500901_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Feb 22 18:03:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500500901_pi300-10000_cl_pass1_src1.csv
[Wed Feb 22 18:03:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500500901_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500500901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 18:03:40 2012] fullrun_pn_xmm0500500901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Feb 22 18:03:40 2012] fullrun_pn_xmm0500500901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Feb 22 18:03:40 2012] Fit fullrun_pn_xmm0500500901_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Feb 22 19:59:34 2012] Spatial fit model total counts = 2037.900000, observed total counts = 2031.000000
[Wed Feb 22 19:59:34 2012] Offset between fit and detection position for source 1 = 0.011698 pixels
[Wed Feb 22 19:59:34 2012] 2005.885000 total counts/ 750.535000 bgd. counts: snr = 45.822560
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.011698 pixels
  Position = (263.3, 309.5) = 21 15 7.92 6 7 21.3
  Extent = 5.9 (5.6-6.1)", rotation angle = 0
  Source counts = 1255.3 +/- 44.8
  Background counts = 750.5
  Rate = 0.03 +/- 0.0009
[Wed Feb 22 19:59:35 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 19:59:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 19:59:35 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 19:59:35 2012] Source does appear to be extended
[Wed Feb 22 19:59:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 20:00:15 2012] Counts = 1255.350000, rescaling region sizes by 2.000000
[Wed Feb 22 20:00:15 2012] XMMSAS src. selection expression = ellipse(22862.498600, 26875.849800, 704.455220, 704.455220, 0.000000, X, Y)
[Wed Feb 22 20:00:15 2012] Writing source region out to fullrun_pn_xmm0500500901_pi300-10000_pass1_cl_src1_src.reg
[Wed Feb 22 20:00:15 2012] Extracting stamp from image fullrun_pn_xmm0500500901_pi300-10000_cl_sm2.00.img.gz, (223, 269) - (304, 350)
[Wed Feb 22 20:00:15 2012] XMMSAS bgd. selection expression = annulus(22862.498600, 26875.849800, 2348.184068, 4696.368135, X, Y) && !ellipse(20289.923800, 28448.750400, 466.683213, 466.683213, 0.000000, X, Y) && !ellipse(20822.934400, 30895.547600, 340.344810, 340.344810, 0.000000, X, Y) && !ellipse(24383.618580, 28464.012600, 1218.736035, 1218.736035, 0.000000, X, Y) && !ellipse(21957.316560, 27488.161800, 258.924007, 258.924007, 0.000000, X, Y) && !ellipse(27437.806580, 27293.448600, 420.587212, 420.587212, 0.000000, X, Y) && !ellipse(19602.507600, 26141.082200, 411.273612, 411.273612, 0.000000, X, Y) && !ellipse(26772.613600, 26023.494000, 357.106410, 357.106410, 0.000000, X, Y) && !ellipse(25408.674600, 25823.900400, 396.243211, 396.243211, 0.000000, X, Y) && !ellipse(21126.592200, 25749.701800, 460.242413, 460.242413, 0.000000, X, Y) && !ellipse(26826.533920, 24692.038200, 573.723217, 573.723217, 0.000000, X, Y) && !ellipse(26121.901600, 23779.024700, 531.524815, 531.524815, 0.000000, X, Y) && !ellipse(26511.550201, 23221.759155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27758.048200, 22647.753200, 337.616810, 337.616810, 0.000000, X, Y) && !ellipse(25905.078000, 22560.864320, 345.613610, 345.613610, 0.000000, X, Y) && !ellipse(27339.948600, 22081.373800, 358.075210, 358.075210, 0.000000, X, Y) && !ellipse(20169.351600, 21878.517000, 407.864812, 407.864812, 0.000000, X, Y)
[Wed Feb 22 20:00:15 2012] Writing fullrun_pn_xmm0500500901_pi300-10000_pass1_cl_src1.gif
[Wed Feb 22 20:01:02 2012] Mean detx,y = (-4293.58, 1312.63) 
[Wed Feb 22 20:01:14 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 20:03:09 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 20:03:09 2012] Setting source spectrum file to fullrun_pn_xmm0500500901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Feb 22 20:03:09 2012] Setting bgd. spectrum file to fullrun_pn_xmm0500500901_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Feb 23 00:09:25 2012] Updating aperture counts using extracted products
[Thu Feb 23 00:09:25 2012] Error reading totcts from fullrun_pn_xmm0500500901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Feb 23 00:09:28 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 00:09:28 2012] Using photon index=1.80, rate=0.0253, arf fullrun_pn_xmm0500500901_pi300-10000_pass1_cl_src1.arf
[Thu Feb 23 00:09:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 00:09:28 2012] Updating source flux to 8.2e-14
[Thu Feb 23 00:16:41 2012] Reading fit data from xmm0500500901/analysis//spectral/fullrun_pn_xmm0500500901_pi300-10000_pass1_cl_src1_pl.csv
[Thu Feb 23 00:16:41 2012] Spectral fit parameter nH value = 8.46771e+20
[Thu Feb 23 00:16:41 2012] Spectral fit parameter PhoIndex value = 2.23566
[Thu Feb 23 00:16:41 2012] Failed to get F(0.3-8.0) from xmm0500500901/analysis//spectral/fullrun_pn_xmm0500500901_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Feb 23 00:16:41 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 00:16:41 2012] Using Nh = 8.5e+20, photon index=2.24, rate=0.0253, arf fullrun_pn_xmm0500500901_pi300-10000_pass1_cl_src1.arf
[Thu Feb 23 00:16:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 00:16:41 2012] Updating source flux to 7.7e-14