[Wed Feb 22 10:38:24 2012] Detection parameters:
  Position = (203.2, 198.2) = 21 15 25.45 5 59 18.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.6 +/- 11.6
  Background counts = 16.2
  Rate = 0.001 +/- 0.0002

[Wed Feb 22 10:38:24 2012] Off-axis axis estimate = 10.03'
[Wed Feb 22 14:34:12 2012] Using EEF radius (= 11.44 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 14:34:12 2012] Initial guess for spatial extent in simple fitting = 11.44"
[Wed Feb 22 14:34:12 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.919
[Wed Feb 22 14:34:12 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 11.44"
[Wed Feb 22 15:48:13 2012] fullrun_mos2_xmm0500500901_pi300-10000_cl_pass0_src19.ximg exists
[Wed Feb 22 15:48:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500500901_pi300-10000_cl_pass0_src19.csv
[Wed Feb 22 15:48:13 2012] fullrun_mos2_xmm0500500901_pi300-10000_cl_pass0_src19_1.ximg exists
[Wed Feb 22 15:48:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500500901_pi300-10000_cl_pass0_src19.csv
[Wed Feb 22 15:48:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500500901_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500500901_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 15:48:13 2012] fullrun_mos2_xmm0500500901_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Wed Feb 22 15:48:13 2012] fullrun_mos2_xmm0500500901_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Wed Feb 22 15:48:13 2012] Fit fullrun_mos2_xmm0500500901_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Wed Feb 22 15:48:50 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 10.492486 pixels away
[Wed Feb 22 15:48:50 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 15:48:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 15:48:50 2012] Assessing source extent using major
[Wed Feb 22 15:48:50 2012] Source does appear to be extended
[Wed Feb 22 15:48:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 19:01:18 2012] Using EEF radius (= 11.44 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 19:01:18 2012] Initial guess for spatial extent in simple fitting = 11.44"
[Wed Feb 22 19:01:18 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.919
[Wed Feb 22 19:01:18 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 11.44"
[Wed Feb 22 19:59:17 2012] fullrun_mos2_xmm0500500901_pi300-10000_cl_pass1_src17.ximg exists
[Wed Feb 22 19:59:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500500901_pi300-10000_cl_pass1_src17.csv
[Wed Feb 22 19:59:17 2012] fullrun_mos2_xmm0500500901_pi300-10000_cl_pass1_src17_1.ximg exists
[Wed Feb 22 19:59:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500500901_pi300-10000_cl_pass1_src17.csv
[Wed Feb 22 19:59:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500500901_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500500901_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 19:59:18 2012] fullrun_mos2_xmm0500500901_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Wed Feb 22 19:59:18 2012] fullrun_mos2_xmm0500500901_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Wed Feb 22 19:59:18 2012] Fit fullrun_mos2_xmm0500500901_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Wed Feb 22 19:59:50 2012] Spatial fit model total counts = 213.999000, observed total counts = 214.000000
[Wed Feb 22 19:59:50 2012] Offset between fit and detection position for source 29 = 0.234295 pixels
[Wed Feb 22 19:59:50 2012] 221.996600 total counts/ 186.376000 bgd. counts: snr = 2.609193
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.234295 pixels
  Position = (203.4, 198.3) = 21 15 25.40 5 59 17.8
  Extent = 3.7 (2.9-5.2)", rotation angle = 0
  Source counts = 35.6 +/- 14.9
  Background counts = 186.4
  Rate = 0.0007 +/- 0.0003
[Wed Feb 22 19:59:50 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 19:59:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 19:59:50 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 19:59:50 2012] Source does appear to be extended
[Wed Feb 22 19:59:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 23:32:04 2012] XMMSAS src. selection expression = ellipse(17644.423400, 17207.001000, 223.237206, 223.237206, 0.000000, X, Y)
[Wed Feb 22 23:32:04 2012] Writing source region out to fullrun_mos2_xmm0500500901_pi300-10000_pass1_cl_src29_src.reg
[Wed Feb 22 23:32:04 2012] Extracting stamp from image fullrun_mos2_xmm0500500901_pi300-10000_cl_sm2.00.img.gz, (191, 186) - (216, 211)
[Wed Feb 22 23:32:04 2012] XMMSAS bgd. selection expression = annulus(17644.423400, 17207.001000, 372.062011, 744.124021, X, Y)
[Wed Feb 22 23:32:04 2012] Writing fullrun_mos2_xmm0500500901_pi300-10000_pass1_cl_src29.gif
[Wed Feb 22 23:38:49 2012] Mean detx,y = (6892.45, -12195.65) 
[Wed Feb 22 23:38:52 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 23:39:01 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 23:39:01 2012] Setting source spectrum file to fullrun_mos2_xmm0500500901_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Wed Feb 22 23:39:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500500901_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Thu Feb 23 00:06:28 2012] Not generating rmf since there are only 35 counts
[Thu Feb 23 00:06:28 2012] rmf not generated due to insufficient counts
[Thu Feb 23 00:09:36 2012] Updating aperture counts using extracted products
[Thu Feb 23 00:09:36 2012] Error reading totcts from fullrun_mos2_xmm0500500901_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Thu Feb 23 00:09:37 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 00:09:37 2012] Using photon index=1.80, rate=0.000691, arf fullrun_mos2_xmm0500500901_pi300-10000_pass1_cl_src29.arf
[Thu Feb 23 00:09:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 00:09:37 2012] Updating source flux to 3.2e-14
[Thu Feb 23 00:11:15 2012] Source 29 has fewer than 100.000000 counts, skipping spectral fitting