[Wed Feb 22 10:37:43 2012] Detection parameters:
  Position = (284.5, 427.1) = 21 15 1.74 6 15 53.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 139.5 +/- 15.4
  Background counts = 17.8
  Rate = 0.005 +/- 0.0006

[Wed Feb 22 10:37:44 2012] Off-axis axis estimate = 9.38'
[Wed Feb 22 13:18:27 2012] Using EEF radius (= 11.12 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 13:18:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 22 13:18:27 2012] Initial guess for spatial extent in simple fitting = 11.12"
[Wed Feb 22 13:18:27 2012] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.124
[Wed Feb 22 13:18:27 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 11.12"
[Wed Feb 22 14:34:12 2012] fullrun_mos1_xmm0500500901_pi300-10000_cl_pass0_src5.ximg exists
[Wed Feb 22 14:34:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500500901_pi300-10000_cl_pass0_src5.csv
[Wed Feb 22 14:34:12 2012] fullrun_mos1_xmm0500500901_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Feb 22 14:34:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500500901_pi300-10000_cl_pass0_src5.csv
[Wed Feb 22 14:34:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500500901_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500500901_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 14:34:12 2012] fullrun_mos1_xmm0500500901_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Feb 22 14:34:12 2012] fullrun_mos1_xmm0500500901_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Feb 22 14:34:12 2012] Fit fullrun_mos1_xmm0500500901_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Feb 22 15:48:42 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 13.466972 pixels away
[Wed Feb 22 15:48:42 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 15:48:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 15:48:42 2012] Assessing source extent using major
[Wed Feb 22 15:48:42 2012] Source does appear to be extended
[Wed Feb 22 15:48:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 18:03:41 2012] Using EEF radius (= 11.12 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 18:03:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 22 18:03:41 2012] Initial guess for spatial extent in simple fitting = 11.12"
[Wed Feb 22 18:03:41 2012] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.124
[Wed Feb 22 18:03:41 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 11.12"
[Wed Feb 22 19:01:17 2012] fullrun_mos1_xmm0500500901_pi300-10000_cl_pass1_src5.ximg exists
[Wed Feb 22 19:01:17 2012] fullrun_mos1_xmm0500500901_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Feb 22 19:01:17 2012] Fit fullrun_mos1_xmm0500500901_pi300-10000_cl_pass1_src5 appears to have run properly
[Wed Feb 22 19:01:18 2012] fullrun_mos1_xmm0500500901_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Feb 22 19:01:18 2012] fullrun_mos1_xmm0500500901_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Feb 22 19:01:18 2012] Fit fullrun_mos1_xmm0500500901_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Feb 22 19:59:43 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 14.776593 pixels away
[Wed Feb 22 19:59:43 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 19:59:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 19:59:43 2012] Assessing source extent using major
[Wed Feb 22 19:59:43 2012] Source does appear to be extended
[Wed Feb 22 19:59:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 22:52:27 2012] XMMSAS src. selection expression = ellipse(24703.411530, 37108.820862, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Feb 22 22:52:27 2012] Writing source region out to fullrun_mos1_xmm0500500901_pi300-10000_pass1_cl_src6_src.reg
[Wed Feb 22 22:52:27 2012] Extracting stamp from image fullrun_mos1_xmm0500500901_pi300-10000_cl_sm2.00.img.gz, (247, 390) - (322, 465)
[Wed Feb 22 22:52:27 2012] XMMSAS bgd. selection expression = annulus(24703.411530, 37108.820862, 1087.500000, 2175.000000, X, Y) && !ellipse(26864.441800, 38345.353400, 301.884009, 301.884009, 0.000000, X, Y)
[Wed Feb 22 22:52:27 2012] Writing fullrun_mos1_xmm0500500901_pi300-10000_pass1_cl_src6.gif
[Wed Feb 22 22:54:01 2012] Mean detx,y = (9069.91, -5445.16) 
[Wed Feb 22 22:54:04 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 22:54:24 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 22:54:24 2012] Setting source spectrum file to fullrun_mos1_xmm0500500901_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Feb 22 22:54:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0500500901_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed Feb 22 23:21:02 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Feb 22 23:21:02 2012] rmf not generated due to insufficient counts
[Thu Feb 23 00:09:31 2012] Updating aperture counts using extracted products
[Thu Feb 23 00:09:31 2012] Error reading totcts from fullrun_mos1_xmm0500500901_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Feb 23 00:09:33 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 00:09:33 2012] Using photon index=1.80, rate=0.00528, arf fullrun_mos1_xmm0500500901_pi300-10000_pass1_cl_src6.arf
[Thu Feb 23 00:09:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 00:09:33 2012] Updating source flux to 8.8e-14
[Thu Feb 23 00:09:39 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting