[Mon Jun 18 10:58:20 2012] Detection parameters:
  Position = (288.8, 197.0) = 21 14 49.67 6 1 16.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2518.3 +/- 62.0
  Background counts = 150.9
  Rate = 0.05 +/- 0.001

[Mon Jun 18 10:58:22 2012] Off-axis axis estimate = 7.39'
[Mon Jun 18 11:04:16 2012] Using EEF radius (= 10.12 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 11:04:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 18 11:04:16 2012] Initial guess for spatial extent in simple fitting = 10.12"
[Mon Jun 18 11:04:16 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.126
[Mon Jun 18 11:04:16 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.12"
[Mon Jun 18 13:04:39 2012] fullrun_pn_xmm0500500801_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jun 18 13:04:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500500801_pi300-10000_cl_pass0_src1.csv
[Mon Jun 18 13:04:39 2012] fullrun_pn_xmm0500500801_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jun 18 13:04:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500500801_pi300-10000_cl_pass0_src1.csv
[Mon Jun 18 13:04:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500500801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500500801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 13:04:40 2012] fullrun_pn_xmm0500500801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jun 18 13:04:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500500801_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jun 18 13:04:40 2012] fullrun_pn_xmm0500500801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jun 18 13:04:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500500801_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jun 18 13:04:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500500801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500500801_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 15:05:39 2012] Spatial fit model total counts = 3793.970000, observed total counts = 3284.000000
[Mon Jun 18 15:05:39 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 18 15:05:39 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 15:05:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 15:05:39 2012] Assessing source extent using major
[Mon Jun 18 15:05:39 2012] Source does appear to be extended
[Mon Jun 18 15:05:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 15:06:10 2012] Using EEF radius (= 10.12 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 15:06:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 18 15:06:10 2012] Initial guess for spatial extent in simple fitting = 10.12"
[Mon Jun 18 15:06:10 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.126
[Mon Jun 18 15:06:10 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.12"
[Mon Jun 18 16:44:10 2012] fullrun_pn_xmm0500500801_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jun 18 16:44:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500500801_pi300-10000_cl_pass1_src1.csv
[Mon Jun 18 16:44:10 2012] fullrun_pn_xmm0500500801_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jun 18 16:44:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500500801_pi300-10000_cl_pass1_src1.csv
[Mon Jun 18 16:44:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500500801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500500801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 16:44:11 2012] fullrun_pn_xmm0500500801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jun 18 16:44:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500500801_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jun 18 16:44:11 2012] fullrun_pn_xmm0500500801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jun 18 16:44:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500500801_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jun 18 16:44:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500500801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500500801_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 18:32:40 2012] Spatial fit model total counts = 3683.050000, observed total counts = 3284.000000
[Mon Jun 18 18:32:40 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 18 18:32:40 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 18:32:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 18:32:40 2012] Assessing source extent using major
[Mon Jun 18 18:32:40 2012] Source does appear to be extended
[Mon Jun 18 18:32:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 18:33:10 2012] Counts = 2518.313721, rescaling region sizes by 2.000000
[Mon Jun 18 18:33:10 2012] XMMSAS src. selection expression = ellipse(25078.131744, 17090.521240, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jun 18 18:33:10 2012] Writing source region out to fullrun_pn_xmm0500500801_pi300-10000_pass1_cl_src1_src.reg
[Mon Jun 18 18:33:10 2012] Extracting stamp from image fullrun_pn_xmm0500500801_pi300-10000_cl_sm2.00.img.gz, (214, 122) - (364, 272)
[Mon Jun 18 18:33:10 2012] XMMSAS bgd. selection expression = annulus(25078.131744, 17090.521240, 4350.000000, 8700.000000, X, Y) && !ellipse(33523.927680, 22028.606600, 532.655215, 330.894410, 105.973747, X, Y) && !ellipse(31650.906342, 22622.189819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19657.618800, 24390.012200, 438.561613, 438.561613, 0.000000, X, Y) && !ellipse(17097.833191, 25974.334229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24244.528000, 24797.588000, 447.148813, 447.148813, 0.000000, X, Y) && !ellipse(22208.501740, 23346.083600, 404.530404, 404.530404, 0.000000, X, Y) && !ellipse(17921.133881, 23267.900909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32171.272255, 12440.600773, 663.877499, 268.231556, 323.611635, X, Y) && !ellipse(17832.479797, 26617.706238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27346.036530, 25844.744904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18763.820267, 24996.935638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23584.558289, 24640.617432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18199.603800, 24502.458800, 274.612008, 274.612008, 0.000000, X, Y) && !ellipse(33291.896880, 23882.525800, 502.152814, 502.152814, 0.000000, X, Y) && !ellipse(23564.204834, 23501.633759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16397.558594, 23679.199463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29744.786469, 22246.927979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23624.624580, 22122.709700, 243.246407, 243.246407, 0.000000, X, Y) && !ellipse(25627.449341, 8935.264885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22970.772200, 21291.207600, 642.899218, 642.899218, 0.000000, X, Y) && !ellipse(23600.252000, 20190.790000, 1414.496041, 1414.496041, 0.000000, X, Y) && !ellipse(32000.406433, 20407.313934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30333.871094, 20389.988541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22687.985200, 20089.919800, 389.583211, 389.583211, 0.000000, X, Y) && !ellipse(24549.210083, 20162.858749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24142.849884, 19593.721359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22776.780800, 19320.948000, 302.895209, 302.895209, 0.000000, X, Y) && !ellipse(16977.296647, 19421.681898, 488.852058, 464.279167, 14.440339, X, Y) && !ellipse(27276.649720, 19023.919200, 669.161619, 289.395208, 146.300166, X, Y) && !ellipse(21997.387085, 17975.082748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28512.308594, 17490.369980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33282.214752, 16643.479355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31626.245400, 16189.650600, 451.936776, 451.936776, 0.000000, X, Y) && !ellipse(16252.474518, 15885.010498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27934.537048, 15887.899170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34004.003052, 15465.728271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27729.733398, 14566.230896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18341.657333, 13967.329300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23509.532471, 13013.678619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22832.704000, 9505.332600, 1774.712051, 465.228013, 200.654000, X, Y) && !ellipse(29235.308800, 9782.357800, 1477.527259, 1477.527259, 0.000000, X, Y) && !ellipse(22541.044159, 9647.926521, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 18 18:33:10 2012] Writing fullrun_pn_xmm0500500801_pi300-10000_pass1_cl_src1.gif
[Mon Jun 18 18:33:58 2012] Mean detx,y = (-3604.20, -7054.91) 
[Mon Jun 18 18:34:08 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 18 18:37:24 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 18 18:37:25 2012] Setting source spectrum file to fullrun_pn_xmm0500500801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun 18 18:37:25 2012] Setting bgd. spectrum file to fullrun_pn_xmm0500500801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jun 18 19:57:13 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 18 19:57:13 2012] rmf not generated due to insufficient counts
[Mon Jun 18 22:55:29 2012] Updating aperture counts using extracted products
[Mon Jun 18 22:55:29 2012] Error reading totcts from fullrun_pn_xmm0500500801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun 18 22:55:30 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 18 22:55:30 2012] Using photon index=1.80, rate=0.0522, arf fullrun_pn_xmm0500500801_pi300-10000_pass1_cl_src1.arf
[Mon Jun 18 22:55:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 18 22:55:30 2012] Updating source flux to 1.9e-13
[Mon Jun 18 22:57:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 18 23:00:15 2012] xmm0500500801/analysis//spectral/fullrun_pn_xmm0500500801_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete