[Mon Jun 18 10:59:25 2012] Detection parameters:
  Position = (197.1, 299.0) = 21 15 16.43 6 8 41.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 248.1 +/- 20.7
  Background counts = 32.5
  Rate = 0.004 +/- 0.0003

[Mon Jun 18 10:59:27 2012] Off-axis axis estimate = 7.35'
[Mon Jun 18 13:59:35 2012] Using EEF radius (= 10.10 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 13:59:35 2012] Initial guess for spatial extent in simple fitting = 10.10"
[Mon Jun 18 13:59:35 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.130
[Mon Jun 18 13:59:35 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 10.10"
[Mon Jun 18 15:05:24 2012] fullrun_mos2_xmm0500500801_pi300-10000_cl_pass0_src8.ximg exists
[Mon Jun 18 15:05:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500500801_pi300-10000_cl_pass0_src8.csv
[Mon Jun 18 15:05:24 2012] fullrun_mos2_xmm0500500801_pi300-10000_cl_pass0_src8_1.ximg exists
[Mon Jun 18 15:05:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500500801_pi300-10000_cl_pass0_src8.csv
[Mon Jun 18 15:05:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500500801_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500500801_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 15:05:25 2012] fullrun_mos2_xmm0500500801_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Mon Jun 18 15:05:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500500801_pi300-10000_cl_pass0_tfrozen_src8.csv
[Mon Jun 18 15:05:25 2012] fullrun_mos2_xmm0500500801_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Mon Jun 18 15:05:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500500801_pi300-10000_cl_pass0_tfrozen_src8.csv
[Mon Jun 18 15:05:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500500801_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500500801_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 15:05:55 2012] Warning, spatial fit 8 centroid is now closest to src. 37
[Mon Jun 18 15:05:55 2012] Spatial fit model total counts = 562.137000, observed total counts = 500.000000
[Mon Jun 18 15:05:55 2012] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 18 15:05:55 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 15:05:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 15:05:55 2012] Assessing source extent using major
[Mon Jun 18 15:05:55 2012] Source does appear to be extended
[Mon Jun 18 15:05:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 17:28:58 2012] Using EEF radius (= 10.10 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 17:28:58 2012] Initial guess for spatial extent in simple fitting = 10.10"
[Mon Jun 18 17:28:58 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.130
[Mon Jun 18 17:28:58 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 10.10"
[Mon Jun 18 18:32:26 2012] fullrun_mos2_xmm0500500801_pi300-10000_cl_pass1_src8.ximg exists
[Mon Jun 18 18:32:26 2012] fullrun_mos2_xmm0500500801_pi300-10000_cl_pass1_src8_1.ximg exists
[Mon Jun 18 18:32:26 2012] Fit fullrun_mos2_xmm0500500801_pi300-10000_cl_pass1_src8 appears to have run properly
[Mon Jun 18 18:32:27 2012] fullrun_mos2_xmm0500500801_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Mon Jun 18 18:32:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500500801_pi300-10000_cl_pass1_tfrozen_src8.csv
[Mon Jun 18 18:32:27 2012] fullrun_mos2_xmm0500500801_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Mon Jun 18 18:32:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500500801_pi300-10000_cl_pass1_tfrozen_src8.csv
[Mon Jun 18 18:32:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500500801_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500500801_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 18:32:54 2012] Spatial fit model total counts = 544.819000, observed total counts = 529.000000
[Mon Jun 18 18:32:54 2012] Offset between fit and detection position for source 9 = 0.071449 pixels
[Mon Jun 18 18:32:54 2012] 545.421000 total counts/ 371.612000 bgd. counts: snr = 9.016280
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.071449 pixels
  Position = (197.0, 299.1) = 21 15 16.44 6 8 40.5
  Extent = 6.4" x 4.4", rotation angle = 252
  Source counts = 173.8 +/- 23.4
  Background counts = 371.6
  Rate = 0.002 +/- 0.0003
[Mon Jun 18 18:32:54 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 18:32:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 18:32:54 2012] Assessing source extent using major
[Mon Jun 18 18:32:54 2012] Source does appear to be extended
[Mon Jun 18 18:32:54 2012] Computing asymmetry using major and minor axis, asym = 1.47
[Mon Jun 18 21:53:18 2012] XMMSAS src. selection expression = ellipse(17092.966820, 25970.847000, 383.755211, 261.708608, 252.353405, X, Y)
[Mon Jun 18 21:53:18 2012] Writing source region out to fullrun_mos2_xmm0500500801_pi300-10000_pass1_cl_src9_src.reg
[Mon Jun 18 21:53:18 2012] Extracting stamp from image fullrun_mos2_xmm0500500801_pi300-10000_cl_sm2.00.img.gz, (175, 277) - (219, 321)
[Mon Jun 18 21:53:18 2012] XMMSAS bgd. selection expression = annulus(17092.966820, 25970.847000, 639.592018, 1279.184037, X, Y) && !ellipse(17844.564163, 26418.682587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17347.475600, 28501.293440, 1607.416046, 1607.416046, 0.000000, X, Y)
[Mon Jun 18 21:53:18 2012] Writing fullrun_mos2_xmm0500500801_pi300-10000_pass1_cl_src9.gif
[Mon Jun 18 21:55:14 2012] Mean detx,y = (-7030.99, 1586.17) 
[Mon Jun 18 21:55:15 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 18 21:55:25 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 18 21:55:25 2012] Setting source spectrum file to fullrun_mos2_xmm0500500801_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon Jun 18 21:55:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500500801_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Mon Jun 18 22:55:32 2012] Updating aperture counts using extracted products
[Mon Jun 18 22:55:32 2012] Error reading totcts from fullrun_mos2_xmm0500500801_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon Jun 18 22:55:33 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 18 22:55:33 2012] Using photon index=1.80, rate=0.00191, arf fullrun_mos2_xmm0500500801_pi300-10000_pass1_cl_src9.arf
[Mon Jun 18 22:55:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 18 22:55:33 2012] Updating source flux to 4.2e-14
[Mon Jun 18 22:56:19 2012] Flag p found in src. 9 procflags, skipping spectral fitting