[Mon Jun 18 10:59:26 2012] Detection parameters:
  Position = (295.1, 103.1) = 21 14 47.84 5 54 27.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.5 +/- 13.5
  Background counts = 26.6
  Rate = 0.0009 +/- 0.0001

[Mon Jun 18 10:59:27 2012] Off-axis axis estimate = 14.16'
[Mon Jun 18 13:59:35 2012] Using EEF radius (= 13.51 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 13:59:35 2012] Initial guess for spatial extent in simple fitting = 13.51"
[Mon Jun 18 13:59:35 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.077
[Mon Jun 18 13:59:35 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 13.51"
[Mon Jun 18 15:05:25 2012] fullrun_mos2_xmm0500500801_pi300-10000_cl_pass0_src38.ximg exists
[Mon Jun 18 15:05:25 2012] fullrun_mos2_xmm0500500801_pi300-10000_cl_pass0_src38_1.ximg exists
[Mon Jun 18 15:05:25 2012] Fit fullrun_mos2_xmm0500500801_pi300-10000_cl_pass0_src38 appears to have run properly
[Mon Jun 18 15:05:25 2012] fullrun_mos2_xmm0500500801_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Mon Jun 18 15:05:25 2012] fullrun_mos2_xmm0500500801_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Mon Jun 18 15:05:25 2012] Fit fullrun_mos2_xmm0500500801_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Mon Jun 18 15:05:55 2012] Spatial fit model total counts = 456.334000, observed total counts = 455.000000
[Mon Jun 18 15:05:55 2012] Offset between fit and detection position for source 53 = 3.543289 pixels
[Mon Jun 18 15:05:55 2012] 441.669400 total counts/ 98.290400 bgd. counts: snr = 34.635238
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 3.543289 pixels
  Position = (298.6, 103.5) = 21 14 46.81 5 54 29.8
  Extent = 27.0 (27.0-27.0)", rotation angle = 0
  Source counts = 343.4 +/- 21.0
  Background counts = 98.3
  Rate = 0.004 +/- 0.0002
[Mon Jun 18 15:05:55 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 15:05:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 15:05:55 2012] Assessing source extent using major axis lower bound
[Mon Jun 18 15:05:55 2012] Source does appear to be extended
[Mon Jun 18 15:05:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 17:28:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 18 17:28:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 18 17:28:58 2012] Initial guess for spatial extent in simple fitting = 27.01"
[Mon Jun 18 17:28:58 2012] source mask rpix=6.2, npix_max = 180, mask sum = 169, frac = 0.939
[Mon Jun 18 17:28:58 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 27.01"
[Mon Jun 18 18:32:27 2012] fullrun_mos2_xmm0500500801_pi300-10000_cl_pass1_src37.ximg exists
[Mon Jun 18 18:32:27 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0500500801_pi300-10000_cl_pass1_src37.csv
[Mon Jun 18 18:32:27 2012] fullrun_mos2_xmm0500500801_pi300-10000_cl_pass1_src37_1.ximg exists
[Mon Jun 18 18:32:27 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0500500801_pi300-10000_cl_pass1_src37.csv
[Mon Jun 18 18:32:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500500801_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500500801_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 18:32:27 2012] fullrun_mos2_xmm0500500801_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Mon Jun 18 18:32:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500500801_pi300-10000_cl_pass1_tfrozen_src37.csv
[Mon Jun 18 18:32:27 2012] fullrun_mos2_xmm0500500801_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Mon Jun 18 18:32:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500500801_pi300-10000_cl_pass1_tfrozen_src37.csv
[Mon Jun 18 18:32:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500500801_pi300-10000_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500500801_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 18:32:54 2012] Warning, spatial fit 37 centroid is now closest to src. 50
[Mon Jun 18 18:32:54 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 18:32:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 18:32:54 2012] Assessing source extent using major axis lower bound
[Mon Jun 18 18:32:54 2012] Source does appear to be extended
[Mon Jun 18 18:32:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 21:53:19 2012] XMMSAS src. selection expression = ellipse(25929.762000, 8954.620216, 1620.516047, 1620.516047, 0.000000, X, Y)
[Mon Jun 18 21:53:19 2012] Writing source region out to fullrun_mos2_xmm0500500801_pi300-10000_pass1_cl_src53_src.reg
[Mon Jun 18 21:53:19 2012] Extracting stamp from image fullrun_mos2_xmm0500500801_pi300-10000_cl_sm2.00.img.gz, (205, 10) - (392, 197)
[Mon Jun 18 21:53:19 2012] XMMSAS bgd. selection expression = annulus(25929.762000, 8954.620216, 2700.860078, 5401.720155, X, Y) && !ellipse(27699.774450, 14491.017477, 549.748180, 317.971567, 0.000000, X, Y)
[Mon Jun 18 21:53:19 2012] Writing fullrun_mos2_xmm0500500801_pi300-10000_pass1_cl_src53.gif
[Mon Jun 18 22:03:28 2012] Mean detx,y = (7327.13, 13910.08) 
[Mon Jun 18 22:03:29 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 18 22:04:02 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 18 22:04:02 2012] Setting source spectrum file to fullrun_mos2_xmm0500500801_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Mon Jun 18 22:04:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500500801_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Mon Jun 18 22:55:32 2012] Updating aperture counts using extracted products
[Mon Jun 18 22:55:32 2012] Error reading totcts from fullrun_mos2_xmm0500500801_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Mon Jun 18 22:55:33 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 18 22:55:33 2012] Using photon index=1.80, rate=0.00378, arf fullrun_mos2_xmm0500500801_pi300-10000_pass1_cl_src53.arf
[Mon Jun 18 22:55:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 18 22:55:33 2012] Updating source flux to 1.3e-13