[Mon Jun 18 10:59:25 2012] Detection parameters:
  Position = (288.7, 196.9) = 21 14 49.71 6 1 15.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 641.8 +/- 30.4
  Background counts = 30.6
  Rate = 0.01 +/- 0.0006

[Mon Jun 18 10:59:27 2012] Off-axis axis estimate = 7.39'
[Mon Jun 18 13:59:35 2012] Using EEF radius (= 10.13 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 13:59:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 18 13:59:35 2012] Initial guess for spatial extent in simple fitting = 10.13"
[Mon Jun 18 13:59:35 2012] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.782
[Mon Jun 18 13:59:35 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.13"
[Mon Jun 18 15:05:24 2012] fullrun_mos2_xmm0500500801_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jun 18 15:05:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500500801_pi300-10000_cl_pass0_src1.csv
[Mon Jun 18 15:05:24 2012] fullrun_mos2_xmm0500500801_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jun 18 15:05:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500500801_pi300-10000_cl_pass0_src1.csv
[Mon Jun 18 15:05:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500500801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500500801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 15:05:25 2012] fullrun_mos2_xmm0500500801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jun 18 15:05:25 2012] fullrun_mos2_xmm0500500801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jun 18 15:05:25 2012] Fit fullrun_mos2_xmm0500500801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jun 18 15:05:55 2012] Spatial fit model total counts = 1001.280000, observed total counts = 918.000000
[Mon Jun 18 15:05:55 2012] Offset between fit and detection position for source 1 = 0.203063 pixels
[Mon Jun 18 15:05:55 2012] 1001.431000 total counts/ 480.246000 bgd. counts: snr = 23.782638
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.203063 pixels
  Position = (288.8, 196.7) = 21 14 49.68 6 1 15.5
  Extent = 6.0 (5.4-6.6)", rotation angle = 0
  Source counts = 521.2 +/- 31.6
  Background counts = 480.2
  Rate = 0.006 +/- 0.0003
[Mon Jun 18 15:05:55 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 15:05:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 15:05:55 2012] Assessing source extent using major axis lower bound
[Mon Jun 18 15:05:55 2012] Source does appear to be extended
[Mon Jun 18 15:05:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 17:28:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 18 17:28:58 2012] Initial guess for spatial extent in simple fitting = 6.00"
[Mon Jun 18 17:28:58 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.133
[Mon Jun 18 17:28:58 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.00"
[Mon Jun 18 18:32:26 2012] fullrun_mos2_xmm0500500801_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jun 18 18:32:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500500801_pi300-10000_cl_pass1_src1.csv
[Mon Jun 18 18:32:26 2012] fullrun_mos2_xmm0500500801_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jun 18 18:32:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500500801_pi300-10000_cl_pass1_src1.csv
[Mon Jun 18 18:32:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500500801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500500801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 18:32:27 2012] fullrun_mos2_xmm0500500801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jun 18 18:32:27 2012] fullrun_mos2_xmm0500500801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jun 18 18:32:27 2012] Fit fullrun_mos2_xmm0500500801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jun 18 18:32:54 2012] Spatial fit model total counts = 883.303000, observed total counts = 804.000000
[Mon Jun 18 18:32:54 2012] Offset between fit and detection position for source 1 = 0.018305 pixels
[Mon Jun 18 18:32:54 2012] 884.187000 total counts/ 376.226000 bgd. counts: snr = 26.188219
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.018305 pixels
  Position = (288.8, 196.8) = 21 14 49.68 6 1 15.5
  Extent = 5.8 (5.3-6.4)", rotation angle = 0
  Source counts = 508.0 +/- 29.7
  Background counts = 376.2
  Rate = 0.006 +/- 0.0003
[Mon Jun 18 18:32:54 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 18:32:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 18:32:54 2012] Assessing source extent using major axis lower bound
[Mon Jun 18 18:32:54 2012] Source does appear to be extended
[Mon Jun 18 18:32:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 21:53:18 2012] XMMSAS src. selection expression = ellipse(25073.507800, 17069.323200, 350.521210, 350.521210, 0.000000, X, Y)
[Mon Jun 18 21:53:18 2012] Writing source region out to fullrun_mos2_xmm0500500801_pi300-10000_pass1_cl_src1_src.reg
[Mon Jun 18 21:53:18 2012] Extracting stamp from image fullrun_mos2_xmm0500500801_pi300-10000_cl_sm2.00.img.gz, (269, 177) - (309, 217)
[Mon Jun 18 21:53:18 2012] XMMSAS bgd. selection expression = annulus(25073.507800, 17069.323200, 584.202017, 1168.404034, X, Y)
[Mon Jun 18 21:53:18 2012] Writing fullrun_mos2_xmm0500500801_pi300-10000_pass1_cl_src1.gif
[Mon Jun 18 21:53:23 2012] Mean detx,y = (3672.88, 6893.32) 
[Mon Jun 18 21:53:24 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 18 21:53:40 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 18 21:53:41 2012] Setting source spectrum file to fullrun_mos2_xmm0500500801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun 18 21:53:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500500801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jun 18 22:55:32 2012] Updating aperture counts using extracted products
[Mon Jun 18 22:55:32 2012] Error reading totcts from fullrun_mos2_xmm0500500801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun 18 22:55:33 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 18 22:55:33 2012] Using photon index=1.80, rate=0.00559, arf fullrun_mos2_xmm0500500801_pi300-10000_pass1_cl_src1.arf
[Mon Jun 18 22:55:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 18 22:55:33 2012] Updating source flux to 1.3e-13
[Mon Jun 18 22:57:40 2012] Reading fit data from xmm0500500801/analysis//spectral/fullrun_mos2_xmm0500500801_pi300-10000_pass1_cl_src1_pl.csv
[Mon Jun 18 22:57:40 2012] Spectral fit parameter nH value = 3.27039e+20
[Mon Jun 18 22:57:40 2012] Spectral fit parameter PhoIndex value = 1.69526
[Mon Jun 18 22:57:40 2012] Failed to get F(0.3-8.0) from xmm0500500801/analysis//spectral/fullrun_mos2_xmm0500500801_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Jun 18 22:57:40 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 18 22:57:40 2012] Using Nh = 3.3e+20, photon index=1.70, rate=0.00559, arf fullrun_mos2_xmm0500500801_pi300-10000_pass1_cl_src1.arf
[Mon Jun 18 22:57:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 18 22:57:40 2012] Updating source flux to 1.4e-13