[Mon Jun 18 10:58:51 2012] Detection parameters:
  Position = (244.0, 433.9) = 21 15 2.75 6 18 28.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.1 +/- 14.6
  Background counts = 35.4
  Rate = 0.0009 +/- 0.0002

[Mon Jun 18 10:58:51 2012] Off-axis axis estimate = 10.59'
[Mon Jun 18 13:04:41 2012] Using EEF radius (= 11.72 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 13:04:41 2012] Initial guess for spatial extent in simple fitting = 11.72"
[Mon Jun 18 13:04:41 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.882
[Mon Jun 18 13:04:41 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 11.72"
[Mon Jun 18 13:59:35 2012] fullrun_mos1_xmm0500500801_pi300-10000_cl_pass0_src33.ximg exists
[Mon Jun 18 13:59:35 2012] fullrun_mos1_xmm0500500801_pi300-10000_cl_pass0_src33_1.ximg exists
[Mon Jun 18 13:59:35 2012] Fit fullrun_mos1_xmm0500500801_pi300-10000_cl_pass0_src33 appears to have run properly
[Mon Jun 18 13:59:35 2012] fullrun_mos1_xmm0500500801_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Mon Jun 18 13:59:35 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0500500801_pi300-10000_cl_pass0_tfrozen_src33.csv
[Mon Jun 18 13:59:35 2012] fullrun_mos1_xmm0500500801_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Mon Jun 18 13:59:35 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0500500801_pi300-10000_cl_pass0_tfrozen_src33.csv
[Mon Jun 18 13:59:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500500801_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500500801_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 15:05:46 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 16.239122 pixels away
[Mon Jun 18 15:05:46 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 15:05:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 15:05:46 2012] Assessing source extent using major
[Mon Jun 18 15:05:46 2012] Source does appear to be extended
[Mon Jun 18 15:05:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 16:44:12 2012] Using EEF radius (= 11.72 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 16:44:12 2012] Initial guess for spatial extent in simple fitting = 11.72"
[Mon Jun 18 16:44:12 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.882
[Mon Jun 18 16:44:12 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 11.72"
[Mon Jun 18 17:28:58 2012] fullrun_mos1_xmm0500500801_pi300-10000_cl_pass1_src32.ximg exists
[Mon Jun 18 17:28:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500500801_pi300-10000_cl_pass1_src32.csv
[Mon Jun 18 17:28:58 2012] fullrun_mos1_xmm0500500801_pi300-10000_cl_pass1_src32_1.ximg exists
[Mon Jun 18 17:28:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500500801_pi300-10000_cl_pass1_src32.csv
[Mon Jun 18 17:28:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500500801_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500500801_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 17:28:58 2012] fullrun_mos1_xmm0500500801_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Mon Jun 18 17:28:58 2012] fullrun_mos1_xmm0500500801_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Mon Jun 18 17:28:58 2012] Fit fullrun_mos1_xmm0500500801_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Mon Jun 18 18:32:46 2012] Spatial fit model total counts = 468.555000, observed total counts = 466.000000
[Mon Jun 18 18:32:46 2012] Offset between fit and detection position for source 18 = 0.879665 pixels
[Mon Jun 18 18:32:46 2012] 466.480200 total counts/ 377.543000 bgd. counts: snr = 4.577204
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.879665 pixels
  Position = (244.8, 433.7) = 21 15 2.50 6 18 26.0
  Extent = 10.1 (6.4-15.8)", rotation angle = 0
  Source counts = 88.9 +/- 21.6
  Background counts = 377.5
  Rate = 0.001 +/- 0.0002
[Mon Jun 18 18:32:46 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 18:32:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 18:32:46 2012] Assessing source extent using major axis lower bound
[Mon Jun 18 18:32:46 2012] Source does appear to be extended
[Mon Jun 18 18:32:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 21:12:58 2012] XMMSAS src. selection expression = ellipse(21250.635800, 37680.572600, 604.194017, 604.194017, 0.000000, X, Y)
[Mon Jun 18 21:12:58 2012] Writing source region out to fullrun_mos1_xmm0500500801_pi300-10000_pass1_cl_src18_src.reg
[Mon Jun 18 21:12:58 2012] Extracting stamp from image fullrun_mos1_xmm0500500801_pi300-10000_cl_sm2.00.img.gz, (210, 399) - (280, 468)
[Mon Jun 18 21:12:58 2012] XMMSAS bgd. selection expression = annulus(21250.635800, 37680.572600, 1006.990029, 2013.980058, X, Y) && !ellipse(19282.663200, 37771.327200, 463.583133, 463.583133, 0.000000, X, Y)
[Mon Jun 18 21:12:58 2012] Writing fullrun_mos1_xmm0500500801_pi300-10000_pass1_cl_src18.gif
[Mon Jun 18 21:22:57 2012] Mean detx,y = (-10661.53, 7297.53) 
[Mon Jun 18 21:22:58 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 18 21:23:09 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 18 21:23:10 2012] Setting source spectrum file to fullrun_mos1_xmm0500500801_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon Jun 18 21:23:10 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0500500801_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Mon Jun 18 21:52:47 2012] Not generating rmf since there are only 88 counts
[Mon Jun 18 21:52:47 2012] rmf not generated due to insufficient counts
[Mon Jun 18 22:55:31 2012] Updating aperture counts using extracted products
[Mon Jun 18 22:55:31 2012] Error reading totcts from fullrun_mos1_xmm0500500801_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon Jun 18 22:55:32 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 18 22:55:32 2012] Using photon index=1.80, rate=0.000967, arf fullrun_mos1_xmm0500500801_pi300-10000_pass1_cl_src18.arf
[Mon Jun 18 22:55:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 18 22:55:32 2012] Updating source flux to 2e-14
[Mon Jun 18 22:55:35 2012] Source 18 has fewer than 100.000000 counts, skipping spectral fitting