[Mon Jun 18 10:58:50 2012] Detection parameters:
  Position = (288.5, 197.0) = 21 14 49.76 6 1 16.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 842.8 +/- 35.8
  Background counts = 38.8
  Rate = 0.01 +/- 0.0006

[Mon Jun 18 10:58:51 2012] Off-axis axis estimate = 7.39'
[Mon Jun 18 13:04:41 2012] Using EEF radius (= 10.12 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 13:04:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 18 13:04:41 2012] Initial guess for spatial extent in simple fitting = 10.12"
[Mon Jun 18 13:04:41 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.938
[Mon Jun 18 13:04:41 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.12"
[Mon Jun 18 13:59:35 2012] fullrun_mos1_xmm0500500801_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jun 18 13:59:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500500801_pi300-10000_cl_pass0_src1.csv
[Mon Jun 18 13:59:35 2012] fullrun_mos1_xmm0500500801_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jun 18 13:59:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500500801_pi300-10000_cl_pass0_src1.csv
[Mon Jun 18 13:59:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500500801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500500801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 13:59:35 2012] fullrun_mos1_xmm0500500801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jun 18 13:59:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500500801_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jun 18 13:59:35 2012] fullrun_mos1_xmm0500500801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jun 18 13:59:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500500801_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jun 18 13:59:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500500801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500500801_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 15:05:46 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.518304 pixels away
[Mon Jun 18 15:05:46 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 15:05:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 15:05:46 2012] Assessing source extent using major
[Mon Jun 18 15:05:46 2012] Source does appear to be extended
[Mon Jun 18 15:05:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 16:44:12 2012] Using EEF radius (= 10.12 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 16:44:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 18 16:44:12 2012] Initial guess for spatial extent in simple fitting = 10.12"
[Mon Jun 18 16:44:12 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.938
[Mon Jun 18 16:44:12 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.12"
[Mon Jun 18 17:28:57 2012] fullrun_mos1_xmm0500500801_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jun 18 17:28:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500500801_pi300-10000_cl_pass1_src1.csv
[Mon Jun 18 17:28:57 2012] fullrun_mos1_xmm0500500801_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jun 18 17:28:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500500801_pi300-10000_cl_pass1_src1.csv
[Mon Jun 18 17:28:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500500801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500500801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 17:28:58 2012] fullrun_mos1_xmm0500500801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jun 18 17:28:58 2012] fullrun_mos1_xmm0500500801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jun 18 17:28:58 2012] Fit fullrun_mos1_xmm0500500801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jun 18 18:32:46 2012] Spatial fit model total counts = 1397.070000, observed total counts = 1327.000000
[Mon Jun 18 18:32:46 2012] Offset between fit and detection position for source 1 = 0.113161 pixels
[Mon Jun 18 18:32:46 2012] 1397.853000 total counts/ 682.890000 bgd. counts: snr = 27.359502
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.113161 pixels
  Position = (288.6, 197.0) = 21 14 49.73 6 1 16.5
  Extent = 7.2 (6.7-7.7)", rotation angle = 0
  Source counts = 715.0 +/- 37.4
  Background counts = 682.9
  Rate = 0.008 +/- 0.0004
[Mon Jun 18 18:32:46 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 18:32:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 18:32:46 2012] Assessing source extent using major axis lower bound
[Mon Jun 18 18:32:46 2012] Source does appear to be extended
[Mon Jun 18 18:32:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 21:12:57 2012] XMMSAS src. selection expression = ellipse(25058.940700, 17089.048400, 432.626412, 432.626412, 0.000000, X, Y)
[Mon Jun 18 21:12:57 2012] Writing source region out to fullrun_mos1_xmm0500500801_pi300-10000_pass1_cl_src1_src.reg
[Mon Jun 18 21:12:57 2012] Extracting stamp from image fullrun_mos1_xmm0500500801_pi300-10000_cl_sm2.00.img.gz, (264, 172) - (313, 222)
[Mon Jun 18 21:12:57 2012] XMMSAS bgd. selection expression = annulus(25058.940700, 17089.048400, 721.044021, 1442.088041, X, Y)
[Mon Jun 18 21:12:57 2012] Writing fullrun_mos1_xmm0500500801_pi300-10000_pass1_cl_src1.gif
[Mon Jun 18 21:13:02 2012] Mean detx,y = (7125.36, -3789.13) 
[Mon Jun 18 21:13:03 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 18 21:13:15 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 18 21:13:15 2012] Setting source spectrum file to fullrun_mos1_xmm0500500801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun 18 21:13:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0500500801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jun 18 22:55:31 2012] Updating aperture counts using extracted products
[Mon Jun 18 22:55:31 2012] Error reading totcts from fullrun_mos1_xmm0500500801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun 18 22:55:31 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 18 22:55:31 2012] Using photon index=1.80, rate=0.00777, arf fullrun_mos1_xmm0500500801_pi300-10000_pass1_cl_src1.arf
[Mon Jun 18 22:55:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 18 22:55:31 2012] Updating source flux to 1.3e-13
[Mon Jun 18 22:56:19 2012] Reading fit data from xmm0500500801/analysis//spectral/fullrun_mos1_xmm0500500801_pi300-10000_pass1_cl_src1_pl.csv
[Mon Jun 18 22:56:19 2012] Spectral fit parameter nH value = 5.7059e+20
[Mon Jun 18 22:56:19 2012] Spectral fit parameter PhoIndex value = 2.17971
[Mon Jun 18 22:56:19 2012] Failed to get F(0.3-8.0) from xmm0500500801/analysis//spectral/fullrun_mos1_xmm0500500801_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Jun 18 22:56:19 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 18 22:56:19 2012] Using Nh = 5.7e+20, photon index=2.18, rate=0.00777, arf fullrun_mos1_xmm0500500801_pi300-10000_pass1_cl_src1.arf
[Mon Jun 18 22:56:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 18 22:56:19 2012] Updating source flux to 1.2e-13