[Tue Mar 20 21:46:10 2012] Detection parameters:
  Position = (282.6, 231.8) = 21 14 51.50 6 3 51.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 134.0 +/- 16.4
  Background counts = 58.0
  Rate = 0.002 +/- 0.0002

[Tue Mar 20 21:46:10 2012] Off-axis axis estimate = 4.96'
[Tue Mar 20 23:56:53 2012] Using EEF radius (= 8.91 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 23:56:53 2012] Initial guess for spatial extent in simple fitting = 8.91"
[Tue Mar 20 23:56:53 2012] source mask rpix=2.0, npix_max = 25, mask sum = 17, frac = 0.654
[Tue Mar 20 23:56:53 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 8.91"
[Wed Mar 21 01:08:25 2012] fullrun_mos2_xmm0500500701_pi300-10000_cl_pass0_src17.ximg exists
[Wed Mar 21 01:08:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500500701_pi300-10000_cl_pass0_src17.csv
[Wed Mar 21 01:08:25 2012] fullrun_mos2_xmm0500500701_pi300-10000_cl_pass0_src17_1.ximg exists
[Wed Mar 21 01:08:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500500701_pi300-10000_cl_pass0_src17.csv
[Wed Mar 21 01:08:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500500701_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500500701_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 01:08:26 2012] fullrun_mos2_xmm0500500701_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Wed Mar 21 01:08:26 2012] fullrun_mos2_xmm0500500701_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Wed Mar 21 01:08:26 2012] Fit fullrun_mos2_xmm0500500701_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Wed Mar 21 01:09:00 2012] Spatial fit model total counts = 634.926000, observed total counts = 666.000000
[Wed Mar 21 01:09:00 2012] Offset between fit and detection position for source 34 = 0.620821 pixels
[Wed Mar 21 01:09:00 2012] 630.450600 total counts/ 576.571000 bgd. counts: snr = 2.243871
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.620821 pixels
  Position = (283.2, 232.0) = 21 14 51.33 6 3 50.0
  Extent = 3.4 (2.6-4.8)", rotation angle = 0
  Source counts = 53.9 +/- 25.1
  Background counts = 576.6
  Rate = 0.0006 +/- 0.0003
[Wed Mar 21 01:09:00 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 01:09:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 01:09:00 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 01:09:00 2012] Source does appear to be extended
[Wed Mar 21 01:09:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 03:14:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 21 03:14:20 2012] Initial guess for spatial extent in simple fitting = 3.41"
[Wed Mar 21 03:14:20 2012] source mask rpix=0.8, npix_max = 6, mask sum = 3, frac = 0.455
[Wed Mar 21 03:14:20 2012] Skipping simple spatial due to low active detector fraction
[Wed Mar 21 04:22:46 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 04:22:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 04:22:46 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 04:22:46 2012] Source does appear to be extended
[Wed Mar 21 04:22:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 06:45:10 2012] XMMSAS src. selection expression = ellipse(24588.319600, 20131.367920, 204.631455, 204.631455, 0.000000, X, Y)
[Wed Mar 21 06:45:10 2012] Writing source region out to fullrun_mos2_xmm0500500701_pi300-10000_pass1_cl_src34_src.reg
[Wed Mar 21 06:45:10 2012] Extracting stamp from image fullrun_mos2_xmm0500500701_pi300-10000_cl_sm2.00.img.gz, (271, 220) - (295, 244)
[Wed Mar 21 06:45:10 2012] XMMSAS bgd. selection expression = annulus(24588.319600, 20131.367920, 341.052425, 682.104849, X, Y)
[Wed Mar 21 06:45:10 2012] Writing fullrun_mos2_xmm0500500701_pi300-10000_pass1_cl_src34.gif
[Wed Mar 21 06:53:48 2012] Mean detx,y = (2011.55, 4255.79) 
[Wed Mar 21 06:53:50 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 06:54:03 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 06:54:04 2012] Setting source spectrum file to fullrun_mos2_xmm0500500701_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Wed Mar 21 06:54:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500500701_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Wed Mar 21 07:22:22 2012] Not generating rmf since there are only 53 counts
[Wed Mar 21 07:22:22 2012] rmf not generated due to insufficient counts
[Wed Mar 21 07:32:27 2012] Updating aperture counts using extracted products
[Wed Mar 21 07:32:27 2012] Error reading totcts from fullrun_mos2_xmm0500500701_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Wed Mar 21 07:32:28 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 07:32:28 2012] Using photon index=1.80, rate=0.000555, arf fullrun_mos2_xmm0500500701_pi300-10000_pass1_cl_src34.arf
[Wed Mar 21 07:32:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 07:32:28 2012] Updating source flux to 1.6e-14
[Wed Mar 21 07:33:12 2012] Source 34 has fewer than 100.000000 counts, skipping spectral fitting