[Tue Jan  3 11:44:02 2012] Detection parameters:
  Position = (306.6, 320.7) = 12 39 7.99 -45 33 45.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4335.7 +/- 78.5
  Background counts = 82.0
  Rate = 0.05 +/- 0.0009

[Tue Jan  3 11:44:03 2012] Off-axis axis estimate = 1.72'
[Tue Jan  3 13:47:26 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Tue Jan  3 13:47:26 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Tue Jan  3 13:47:26 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Tue Jan  3 13:47:26 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Tue Jan  3 14:30:18 2012] fullrun_mos2_xmm0500440101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jan  3 14:30:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500440101_pi300-10000_cl_pass0_src1.csv
[Tue Jan  3 14:30:18 2012] fullrun_mos2_xmm0500440101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jan  3 14:30:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500440101_pi300-10000_cl_pass0_src1.csv
[Tue Jan  3 14:30:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500440101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500440101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan  3 14:30:18 2012] fullrun_mos2_xmm0500440101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jan  3 14:30:18 2012] fullrun_mos2_xmm0500440101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jan  3 14:30:18 2012] Fit fullrun_mos2_xmm0500440101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jan  3 14:30:45 2012] Spatial fit model total counts = 3840.000000, observed total counts = 3840.000000
[Tue Jan  3 14:30:45 2012] Offset between fit and detection position for source 3 = 0.206961 pixels
[Tue Jan  3 14:30:45 2012] 3822.270000 total counts/ 1112.890000 bgd. counts: snr = 81.216412
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.206961 pixels
  Position = (306.4, 320.6) = 12 39 8.05 -45 33 45.6
  Extent = 5.3 (5.1-5.5)", rotation angle = 0
  Source counts = 2709.4 +/- 61.8
  Background counts = 1112.9
  Rate = 0.03 +/- 0.0008
[Tue Jan  3 14:30:45 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 14:30:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 14:30:45 2012] Assessing source extent using major axis lower bound
[Tue Jan  3 14:30:45 2012] Source does appear to be extended
[Tue Jan  3 14:30:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan  3 16:31:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan  3 16:31:57 2012] Initial guess for spatial extent in simple fitting = 5.32"
[Tue Jan  3 16:31:57 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.759
[Tue Jan  3 16:31:57 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.32"
[Tue Jan  3 17:14:27 2012] fullrun_mos2_xmm0500440101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jan  3 17:14:27 2012] fullrun_mos2_xmm0500440101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jan  3 17:14:27 2012] Fit fullrun_mos2_xmm0500440101_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Jan  3 17:14:27 2012] fullrun_mos2_xmm0500440101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jan  3 17:14:27 2012] fullrun_mos2_xmm0500440101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jan  3 17:14:27 2012] Fit fullrun_mos2_xmm0500440101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jan  3 17:14:53 2012] Spatial fit model total counts = 3855.670000, observed total counts = 3842.000000
[Tue Jan  3 17:14:53 2012] Offset between fit and detection position for source 3 = 0.007214 pixels
[Tue Jan  3 17:14:53 2012] 3847.100000 total counts/ 1112.660000 bgd. counts: snr = 81.976083
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.007214 pixels
  Position = (306.4, 320.6) = 12 39 8.05 -45 33 45.6
  Extent = 5.3 (5.2-5.6)", rotation angle = 0
  Source counts = 2734.4 +/- 62.0
  Background counts = 1112.7
  Rate = 0.03 +/- 0.0008
[Tue Jan  3 17:14:53 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 17:14:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 17:14:53 2012] Assessing source extent using major axis lower bound
[Tue Jan  3 17:14:53 2012] Source does appear to be extended
[Tue Jan  3 17:14:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan  3 20:20:38 2012] Counts = 2734.440000, rescaling region sizes by 2.000000
[Tue Jan  3 20:20:38 2012] XMMSAS src. selection expression = ellipse(26610.671800, 27841.006600, 640.317618, 640.317618, 0.000000, X, Y)
[Tue Jan  3 20:20:38 2012] Writing source region out to fullrun_mos2_xmm0500440101_pi300-10000_pass1_cl_src3_src.reg
[Tue Jan  3 20:20:38 2012] Extracting stamp from image fullrun_mos2_xmm0500440101_pi300-10000_cl_sm2.00.img.gz, (270, 284) - (343, 357)
[Tue Jan  3 20:20:38 2012] XMMSAS bgd. selection expression = annulus(26610.671800, 27841.006600, 2134.392061, 4268.784123, X, Y) && !ellipse(28754.218933, 23359.709167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26234.872253, 29158.585205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25687.361760, 31051.022200, 628.824018, 308.749609, 324.279928, X, Y)
[Tue Jan  3 20:20:38 2012] Writing fullrun_mos2_xmm0500440101_pi300-10000_pass1_cl_src3.gif
[Tue Jan  3 20:20:45 2012] Mean detx,y = (27.48, 45.32) 
[Tue Jan  3 20:20:48 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan  3 20:21:04 2012] Binned source spectrum to 10 counts/bin
[Tue Jan  3 20:21:04 2012] Setting source spectrum file to fullrun_mos2_xmm0500440101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jan  3 20:21:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500440101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jan  3 20:55:34 2012] Updating aperture counts using extracted products
[Tue Jan  3 20:55:34 2012] Error reading totcts from fullrun_mos2_xmm0500440101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jan  3 20:55:35 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 20:55:35 2012] Using photon index=1.80, rate=0.0344, arf fullrun_mos2_xmm0500440101_pi300-10000_pass1_cl_src3.arf
[Tue Jan  3 20:55:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 20:55:35 2012] Updating source flux to 3.7e-13
[Tue Jan  3 20:57:18 2012] Reading fit data from xmm0500440101/analysis//spectral/fullrun_mos2_xmm0500440101_pi300-10000_pass1_cl_src3_pl.csv
[Tue Jan  3 20:57:18 2012] Spectral fit parameter nH value = 3.90979e+21
[Tue Jan  3 20:57:18 2012] Spectral fit parameter PhoIndex value = 1.05998
[Tue Jan  3 20:57:18 2012] Failed to get F(0.3-8.0) from xmm0500440101/analysis//spectral/fullrun_mos2_xmm0500440101_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Tue Jan  3 20:57:18 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 20:57:18 2012] Using Nh = 3.9e+21, photon index=1.06, rate=0.0344, arf fullrun_mos2_xmm0500440101_pi300-10000_pass1_cl_src3.arf
[Tue Jan  3 20:57:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 20:57:18 2012] Updating source flux to 6.9e-13