[Tue Jan  3 11:44:03 2012] Detection parameters:
  Position = (335.0, 199.9) = 12 38 56.18 -45 42 30.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 124.1 +/- 16.5
  Background counts = 66.8
  Rate = 0.003 +/- 0.0003

[Tue Jan  3 11:44:03 2012] Off-axis axis estimate = 7.62'
[Tue Jan  3 13:47:26 2012] Using EEF radius (= 10.24 ")to estimate initial spatial extent for simple fitting
[Tue Jan  3 13:47:26 2012] Initial guess for spatial extent in simple fitting = 10.24"
[Tue Jan  3 13:47:26 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.105
[Tue Jan  3 13:47:26 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 10.24"
[Tue Jan  3 14:30:18 2012] fullrun_mos2_xmm0500440101_pi300-10000_cl_pass0_src7.ximg exists
[Tue Jan  3 14:30:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500440101_pi300-10000_cl_pass0_src7.csv
[Tue Jan  3 14:30:18 2012] fullrun_mos2_xmm0500440101_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Jan  3 14:30:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500440101_pi300-10000_cl_pass0_src7.csv
[Tue Jan  3 14:30:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500440101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500440101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan  3 14:30:18 2012] fullrun_mos2_xmm0500440101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Jan  3 14:30:18 2012] fullrun_mos2_xmm0500440101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Jan  3 14:30:18 2012] Fit fullrun_mos2_xmm0500440101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Tue Jan  3 14:30:45 2012] Spatial fit model total counts = 479.574000, observed total counts = 481.000000
[Tue Jan  3 14:30:45 2012] Offset between fit and detection position for source 24 = 0.174910 pixels
[Tue Jan  3 14:30:45 2012] 470.353600 total counts/ 401.419000 bgd. counts: snr = 3.440633
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.174910 pixels
  Position = (335.1, 200.0) = 12 38 56.12 -45 42 30.0
  Extent = 4.8 (3.8-6.0)", rotation angle = 0
  Source counts = 68.9 +/- 21.7
  Background counts = 401.4
  Rate = 0.0009 +/- 0.0003
[Tue Jan  3 14:30:45 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 14:30:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 14:30:45 2012] Assessing source extent using major axis lower bound
[Tue Jan  3 14:30:45 2012] Source does appear to be extended
[Tue Jan  3 14:30:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan  3 16:31:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan  3 16:31:57 2012] Initial guess for spatial extent in simple fitting = 4.82"
[Tue Jan  3 16:31:57 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.159
[Tue Jan  3 16:31:57 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 4.82"
[Tue Jan  3 17:14:27 2012] fullrun_mos2_xmm0500440101_pi300-10000_cl_pass1_src7.ximg exists
[Tue Jan  3 17:14:27 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0500440101_pi300-10000_cl_pass1_src7.csv
[Tue Jan  3 17:14:27 2012] fullrun_mos2_xmm0500440101_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Jan  3 17:14:27 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0500440101_pi300-10000_cl_pass1_src7.csv
[Tue Jan  3 17:14:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500440101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500440101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan  3 17:14:27 2012] fullrun_mos2_xmm0500440101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Jan  3 17:14:27 2012] fullrun_mos2_xmm0500440101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Jan  3 17:14:27 2012] Fit fullrun_mos2_xmm0500440101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Tue Jan  3 17:14:53 2012] Warning, spatial fit 7 centroid is now closest to src. 19
[Tue Jan  3 17:14:53 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 17:14:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 17:14:53 2012] Assessing source extent using major axis lower bound
[Tue Jan  3 17:14:53 2012] Source does appear to be extended
[Tue Jan  3 17:14:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan  3 20:20:39 2012] XMMSAS src. selection expression = ellipse(29109.050000, 17352.334000, 289.371008, 289.371008, 0.000000, X, Y)
[Tue Jan  3 20:20:39 2012] Writing source region out to fullrun_mos2_xmm0500440101_pi300-10000_pass1_cl_src24_src.reg
[Tue Jan  3 20:20:39 2012] Extracting stamp from image fullrun_mos2_xmm0500440101_pi300-10000_cl_sm2.00.img.gz, (319, 183) - (352, 217)
[Tue Jan  3 20:20:39 2012] XMMSAS bgd. selection expression = annulus(29109.050000, 17352.334000, 482.285014, 964.570028, X, Y) && !ellipse(28262.052000, 16959.789200, 655.628819, 269.594408, 352.017207, X, Y)
[Tue Jan  3 20:20:39 2012] Writing fullrun_mos2_xmm0500440101_pi300-10000_pass1_cl_src24.gif
[Tue Jan  3 20:25:00 2012] Mean detx,y = (322.64, -10718.02) 
[Tue Jan  3 20:25:01 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan  3 20:25:14 2012] Binned source spectrum to 10 counts/bin
[Tue Jan  3 20:25:14 2012] Setting source spectrum file to fullrun_mos2_xmm0500440101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Tue Jan  3 20:25:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500440101_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Tue Jan  3 20:36:46 2012] Not generating rmf since there are only 68 counts
[Tue Jan  3 20:36:46 2012] rmf not generated due to insufficient counts
[Tue Jan  3 20:55:34 2012] Updating aperture counts using extracted products
[Tue Jan  3 20:55:34 2012] Error reading totcts from fullrun_mos2_xmm0500440101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Tue Jan  3 20:55:35 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 20:55:35 2012] Using photon index=1.80, rate=0.000867, arf fullrun_mos2_xmm0500440101_pi300-10000_pass1_cl_src24.arf
[Tue Jan  3 20:55:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 20:55:35 2012] Updating source flux to 2.1e-14
[Tue Jan  3 20:56:32 2012] Source 24 has fewer than 100.000000 counts, skipping spectral fitting