[Tue Jan  3 11:43:26 2012] Detection parameters:
  Position = (306.6, 320.7) = 12 39 7.99 -45 33 45.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4381.9 +/- 80.0
  Background counts = 94.6
  Rate = 0.05 +/- 0.0009

[Tue Jan  3 11:43:27 2012] Off-axis axis estimate = 1.72'
[Tue Jan  3 13:15:31 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Tue Jan  3 13:15:31 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Tue Jan  3 13:15:31 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Tue Jan  3 13:15:31 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Tue Jan  3 13:47:26 2012] fullrun_mos1_xmm0500440101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jan  3 13:47:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500440101_pi300-10000_cl_pass0_src1.csv
[Tue Jan  3 13:47:26 2012] fullrun_mos1_xmm0500440101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jan  3 13:47:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500440101_pi300-10000_cl_pass0_src1.csv
[Tue Jan  3 13:47:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500440101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500440101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan  3 13:47:26 2012] fullrun_mos1_xmm0500440101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jan  3 13:47:26 2012] fullrun_mos1_xmm0500440101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jan  3 13:47:26 2012] Fit fullrun_mos1_xmm0500440101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jan  3 14:30:38 2012] Spatial fit model total counts = 3868.000000, observed total counts = 3868.000000
[Tue Jan  3 14:30:38 2012] Offset between fit and detection position for source 2 = 0.263096 pixels
[Tue Jan  3 14:30:38 2012] 3885.540000 total counts/ 1219.940000 bgd. counts: snr = 76.317783
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.263096 pixels
  Position = (306.4, 320.5) = 12 39 8.07 -45 33 45.9
  Extent = 5.4 (5.2-5.5)", rotation angle = 0
  Source counts = 2665.6 +/- 62.3
  Background counts = 1219.9
  Rate = 0.03 +/- 0.0008
[Tue Jan  3 14:30:38 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 14:30:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 14:30:38 2012] Assessing source extent using major axis lower bound
[Tue Jan  3 14:30:38 2012] Source does appear to be extended
[Tue Jan  3 14:30:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan  3 16:05:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan  3 16:05:44 2012] Initial guess for spatial extent in simple fitting = 5.38"
[Tue Jan  3 16:05:44 2012] source mask rpix=1.2, npix_max = 12, mask sum = 9, frac = 0.746
[Tue Jan  3 16:05:44 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.38"
[Tue Jan  3 16:31:56 2012] fullrun_mos1_xmm0500440101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jan  3 16:31:56 2012] fullrun_mos1_xmm0500440101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jan  3 16:31:56 2012] Fit fullrun_mos1_xmm0500440101_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Jan  3 16:31:57 2012] fullrun_mos1_xmm0500440101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jan  3 16:31:57 2012] fullrun_mos1_xmm0500440101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jan  3 16:31:57 2012] Fit fullrun_mos1_xmm0500440101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jan  3 17:14:47 2012] Spatial fit model total counts = 3868.000000, observed total counts = 3868.000000
[Tue Jan  3 17:14:47 2012] Offset between fit and detection position for source 2 = 0.000005 pixels
[Tue Jan  3 17:14:47 2012] 3885.540000 total counts/ 1219.890000 bgd. counts: snr = 76.320778
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000005 pixels
  Position = (306.4, 320.5) = 12 39 8.07 -45 33 45.9
  Extent = 5.4 (5.2-5.5)", rotation angle = 0
  Source counts = 2665.7 +/- 62.3
  Background counts = 1219.9
  Rate = 0.03 +/- 0.0008
[Tue Jan  3 17:14:47 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 17:14:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 17:14:47 2012] Assessing source extent using major axis lower bound
[Tue Jan  3 17:14:47 2012] Source does appear to be extended
[Tue Jan  3 17:14:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan  3 19:48:16 2012] Counts = 2665.650000, rescaling region sizes by 2.000000
[Tue Jan  3 19:48:16 2012] XMMSAS src. selection expression = ellipse(26606.657000, 27836.204400, 645.456612, 645.456612, 0.000000, X, Y)
[Tue Jan  3 19:48:16 2012] Writing source region out to fullrun_mos1_xmm0500440101_pi300-10000_pass1_cl_src2_src.reg
[Tue Jan  3 19:48:16 2012] Extracting stamp from image fullrun_mos1_xmm0500440101_pi300-10000_cl_sm2.00.img.gz, (269, 283) - (343, 358)
[Tue Jan  3 19:48:16 2012] XMMSAS bgd. selection expression = annulus(26606.657000, 27836.204400, 2151.522040, 4303.044080, X, Y) && !ellipse(28760.780020, 23338.733800, 375.972011, 375.972011, 0.000000, X, Y) && !ellipse(26230.819500, 29128.755600, 344.502410, 344.502410, 0.000000, X, Y)
[Tue Jan  3 19:48:16 2012] Writing fullrun_mos1_xmm0500440101_pi300-10000_pass1_cl_src2.gif
[Tue Jan  3 19:48:25 2012] Mean detx,y = (262.05, -193.50) 
[Tue Jan  3 19:48:27 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan  3 19:48:52 2012] Binned source spectrum to 10 counts/bin
[Tue Jan  3 19:48:53 2012] Setting source spectrum file to fullrun_mos1_xmm0500440101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jan  3 19:48:53 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0500440101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Jan  3 20:55:32 2012] Updating aperture counts using extracted products
[Tue Jan  3 20:55:32 2012] Error reading totcts from fullrun_mos1_xmm0500440101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jan  3 20:55:33 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 20:55:33 2012] Using photon index=1.80, rate=0.034, arf fullrun_mos1_xmm0500440101_pi300-10000_pass1_cl_src2.arf
[Tue Jan  3 20:55:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 20:55:33 2012] Updating source flux to 3.4e-13
[Tue Jan  3 20:56:32 2012] Reading fit data from xmm0500440101/analysis//spectral/fullrun_mos1_xmm0500440101_pi300-10000_pass1_cl_src2_pl.csv
[Tue Jan  3 20:56:32 2012] Spectral fit parameter nH value = 4.19985e+21
[Tue Jan  3 20:56:32 2012] Spectral fit parameter PhoIndex value = 1.0978
[Tue Jan  3 20:56:32 2012] Failed to get F(0.3-8.0) from xmm0500440101/analysis//spectral/fullrun_mos1_xmm0500440101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Jan  3 20:56:32 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 20:56:32 2012] Using Nh = 4.2e+21, photon index=1.10, rate=0.034, arf fullrun_mos1_xmm0500440101_pi300-10000_pass1_cl_src2.arf
[Tue Jan  3 20:56:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 20:56:32 2012] Updating source flux to 6.2e-13