[Mon Mar 12 00:41:36 2012] Detection parameters:
  Position = (478.7, 326.8) = 15 59 37.64 -51 30 5.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 99.3 +/- 17.1
  Background counts = 68.3
  Rate = 0.001 +/- 0.0003

[Mon Mar 12 00:41:37 2012] Off-axis axis estimate = 13.23'
[Mon Mar 12 01:42:41 2012] Using EEF radius (= 13.04 ")to estimate initial spatial extent for simple fitting
[Mon Mar 12 01:42:41 2012] Initial guess for spatial extent in simple fitting = 13.04"
[Mon Mar 12 01:42:41 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.001
[Mon Mar 12 01:42:41 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 13.04"
[Mon Mar 12 03:16:24 2012] fullrun_mos2_xmm0500300101_pi300-10000_cl_pass0_src28.ximg exists
[Mon Mar 12 03:16:24 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0500300101_pi300-10000_cl_pass0_src28.csv
[Mon Mar 12 03:16:24 2012] fullrun_mos2_xmm0500300101_pi300-10000_cl_pass0_src28_1.ximg exists
[Mon Mar 12 03:16:24 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0500300101_pi300-10000_cl_pass0_src28.csv
[Mon Mar 12 03:16:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500300101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500300101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 03:16:24 2012] fullrun_mos2_xmm0500300101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Mon Mar 12 03:16:24 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0500300101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Mon Mar 12 03:16:24 2012] fullrun_mos2_xmm0500300101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Mon Mar 12 03:16:25 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0500300101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Mon Mar 12 03:16:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500300101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500300101_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 03:16:42 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 17.372427 pixels away
[Mon Mar 12 03:16:42 2012] Spatial fit model total counts = 411.210000, observed total counts = 410.000000
[Mon Mar 12 03:16:42 2012] Offset between fit and detection position for source 5 = 0.789972 pixels
[Mon Mar 12 03:16:42 2012] Warning, changing simple spatial fit ID from 28 to 29
[Mon Mar 12 03:16:42 2012] 411.305700 total counts/ 395.802000 bgd. counts: snr = 0.779285
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.789972 pixels
  Position = (478.2, 327.4) = 15 59 37.88 -51 30 3.5
  Extent = 3.2" x 3.2", rotation angle = 0
  Source counts = 15.5 +/- 20.3
  Background counts = 395.8
  Rate = 0.0003 +/- 0.0004
  Deleting source due to low Poisson probability