[Mon Mar 12 00:41:36 2012] Detection parameters:
  Position = (427.2, 206.8) = 16 0 1.40 -51 38 50.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 153.9 +/- 20.6
  Background counts = 97.6
  Rate = 0.002 +/- 0.0003

[Mon Mar 12 00:41:37 2012] Off-axis axis estimate = 11.46'
[Mon Mar 12 01:42:41 2012] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting
[Mon Mar 12 01:42:41 2012] Initial guess for spatial extent in simple fitting = 12.16"
[Mon Mar 12 01:42:41 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.967
[Mon Mar 12 01:42:41 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 12.16"
[Mon Mar 12 03:16:24 2012] fullrun_mos2_xmm0500300101_pi300-10000_cl_pass0_src16.ximg exists
[Mon Mar 12 03:16:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500300101_pi300-10000_cl_pass0_src16.csv
[Mon Mar 12 03:16:24 2012] fullrun_mos2_xmm0500300101_pi300-10000_cl_pass0_src16_1.ximg exists
[Mon Mar 12 03:16:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500300101_pi300-10000_cl_pass0_src16.csv
[Mon Mar 12 03:16:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500300101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500300101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 03:16:24 2012] fullrun_mos2_xmm0500300101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Mon Mar 12 03:16:24 2012] fullrun_mos2_xmm0500300101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Mon Mar 12 03:16:24 2012] Fit fullrun_mos2_xmm0500300101_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Mon Mar 12 03:16:42 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 14.513317 pixels away
[Mon Mar 12 03:16:42 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 03:16:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 03:16:42 2012] Assessing source extent using major
[Mon Mar 12 03:16:42 2012] Source does appear to be extended
[Mon Mar 12 03:16:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 04:26:11 2012] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting
[Mon Mar 12 04:26:11 2012] Initial guess for spatial extent in simple fitting = 12.16"
[Mon Mar 12 04:26:11 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.967
[Mon Mar 12 04:26:11 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 12.16"
[Mon Mar 12 05:45:30 2012] fullrun_mos2_xmm0500300101_pi300-10000_cl_pass1_src16.ximg exists
[Mon Mar 12 05:45:30 2012] fullrun_mos2_xmm0500300101_pi300-10000_cl_pass1_src16_1.ximg exists
[Mon Mar 12 05:45:30 2012] Fit fullrun_mos2_xmm0500300101_pi300-10000_cl_pass1_src16 appears to have run properly
[Mon Mar 12 05:45:31 2012] fullrun_mos2_xmm0500300101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Mon Mar 12 05:45:31 2012] fullrun_mos2_xmm0500300101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Mon Mar 12 05:45:31 2012] Fit fullrun_mos2_xmm0500300101_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Mon Mar 12 05:45:43 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 14.476041 pixels away
[Mon Mar 12 05:45:43 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 05:45:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 05:45:43 2012] Assessing source extent using major
[Mon Mar 12 05:45:43 2012] Source does appear to be extended
[Mon Mar 12 05:45:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 07:22:01 2012] XMMSAS src. selection expression = ellipse(37120.579987, 17947.346985, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Mar 12 07:22:01 2012] Writing source region out to fullrun_mos2_xmm0500300101_pi300-10000_pass1_cl_src10_src.reg
[Mon Mar 12 07:22:01 2012] Extracting stamp from image fullrun_mos2_xmm0500300101_pi300-10000_cl_sm2.00.img.gz, (390, 169) - (465, 244)
[Mon Mar 12 07:22:01 2012] XMMSAS bgd. selection expression = annulus(37120.579987, 17947.346985, 1087.500000, 2175.000000, X, Y)
[Mon Mar 12 07:22:01 2012] Writing fullrun_mos2_xmm0500300101_pi300-10000_pass1_cl_src10.gif
[Mon Mar 12 07:33:17 2012] Mean detx,y = (8227.26, 10194.02) 
[Mon Mar 12 07:33:20 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 12 07:33:37 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 12 07:33:37 2012] Setting source spectrum file to fullrun_mos2_xmm0500300101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Mar 12 07:33:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500300101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Mon Mar 12 08:11:32 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar 12 08:11:32 2012] rmf not generated due to insufficient counts
[Mon Mar 12 08:22:55 2012] Updating aperture counts using extracted products
[Mon Mar 12 08:22:55 2012] Error reading totcts from fullrun_mos2_xmm0500300101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Mar 12 08:22:57 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 12 08:22:57 2012] Using photon index=1.80, rate=0.00228, arf fullrun_mos2_xmm0500300101_pi300-10000_pass1_cl_src10.arf
[Mon Mar 12 08:22:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 12 08:22:57 2012] Updating source flux to 6e-14
[Mon Mar 12 08:25:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting