[Mon May 20 17:25:51 2013] Detection parameters:
  Position = (321.3, 311.0) = 12 1 43.80 -18 48 58.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 863.5 +/- 38.1
  Background counts = 109.4
  Rate = 0.04 +/- 0.002

[Mon May 20 17:25:52 2013] Off-axis axis estimate = 1.89'
[Mon May 20 17:28:52 2013] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Mon May 20 17:28:52 2013] Initial guess for spatial extent in simple fitting = 7.38"
[Mon May 20 17:28:52 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.037
[Mon May 20 17:28:52 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 7.38"
[Mon May 20 18:26:19 2013] fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_src6.ximg exists
[Mon May 20 18:26:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_src6.csv
[Mon May 20 18:26:19 2013] fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon May 20 18:26:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_src6.csv
[Mon May 20 18:26:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 18:26:19 2013] fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon May 20 18:26:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src6.csv
[Mon May 20 18:26:19 2013] fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon May 20 18:26:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src6.csv
[Mon May 20 18:26:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 20:46:23 2013] Spatial fit model total counts = 938.558000, observed total counts = 850.000000
[Mon May 20 20:46:23 2013] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 20 20:46:23 2013] Vigneting correction estimate = 1.000000
[Mon May 20 20:46:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 20:46:23 2013] Assessing source extent using major
[Mon May 20 20:46:23 2013] Source does appear to be extended
[Mon May 20 20:46:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 20:46:46 2013] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Mon May 20 20:46:46 2013] Initial guess for spatial extent in simple fitting = 7.38"
[Mon May 20 20:46:46 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.037
[Mon May 20 20:46:46 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 7.38"
[Mon May 20 21:34:57 2013] fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_src6.ximg exists
[Mon May 20 21:34:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_src6.csv
[Mon May 20 21:34:57 2013] fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_src6_1.ximg exists
[Mon May 20 21:34:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_src6.csv
[Mon May 20 21:34:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 21:34:57 2013] fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Mon May 20 21:34:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon May 20 21:34:57 2013] fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Mon May 20 21:34:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon May 20 21:34:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 00:01:22 2013] Source 6 is offset by 7.096956 and 5.813631 pixels which is larger than
2 X fitted extent = 0.847733 x 0.847733, not incorporating fit results
[Tue May 21 00:01:22 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:01:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:01:22 2013] Assessing source extent using major
[Tue May 21 00:01:22 2013] Source does appear to be extended
[Tue May 21 00:01:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 00:01:59 2013] XMMSAS src. selection expression = ellipse(27905.913177, 27011.263885, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 21 00:01:59 2013] Writing source region out to fullrun_pn_xmm0500070701_pi300-10000_pass1_cl_src6_src.reg
[Tue May 21 00:01:59 2013] Extracting stamp from image fullrun_pn_xmm0500070701_pi300-10000_cl_sm2.00.img.gz, (284, 274) - (359, 349)
[Tue May 21 00:01:59 2013] XMMSAS bgd. selection expression = annulus(27905.913177, 27011.263885, 1087.500000, 2175.000000, X, Y) && !ellipse(28530.118530, 28805.941559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30263.143768, 28339.758240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26430.675354, 26879.478851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26094.973200, 25893.832800, 328.980009, 328.980009, 0.000000, X, Y)
[Tue May 21 00:01:59 2013] Writing fullrun_pn_xmm0500070701_pi300-10000_pass1_cl_src6.gif
[Tue May 21 00:15:31 2013] Mean detx,y = (-3284.72, 1675.06) 
[Tue May 21 00:15:37 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 21 00:15:56 2013] Binned source spectrum to 10 counts/bin
[Tue May 21 00:15:57 2013] Setting source spectrum file to fullrun_pn_xmm0500070701_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue May 21 00:15:57 2013] Setting bgd. spectrum file to fullrun_pn_xmm0500070701_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue May 21 02:37:11 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 21 02:37:11 2013] rmf not generated due to insufficient counts
[Tue May 21 04:57:42 2013] Updating aperture counts using extracted products
[Tue May 21 04:57:42 2013] Total counts from fullrun_pn_xmm0500070701_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 752.00
[Tue May 21 04:57:43 2013] Total counts from fullrun_pn_xmm0500070701_pi300-10000_pass1_cl_src6_bgd.pi.gz = 1112.00
[Tue May 21 04:57:43 2013] Got source and background scale factors 1133090.000000, 6322743.000000
[Tue May 21 04:57:43 2013] User source parameters:
  Position = (321.3, 311.0) = 12 1 43.80 -18 48 58.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 552.7 +/- 28.4
  Background aperture counts = 199.3
  Rate = 0.02 +/- 0.001

[Tue May 21 04:57:43 2013] Updating counts from extracted products
[Tue May 21 04:57:43 2013] Set source signif. to 552.72/14.12 = 39.15
[Tue May 21 04:57:52 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 04:57:52 2013] Using photon index=1.80, rate=0.0238, arf fullrun_pn_xmm0500070701_pi300-10000_pass1_cl_src6.arf
[Tue May 21 04:57:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 04:57:52 2013] Updating source flux to 8.2e-14
[Tue May 21 04:58:32 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 21 04:58:44 2013] xmm0500070701/analysis//spectral/fullrun_pn_xmm0500070701_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete