[Mon May 20 17:25:51 2013] Detection parameters:
  Position = (311.8, 204.2) = 12 1 46.72 -18 56 43.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 696.7 +/- 34.7
  Background counts = 106.5
  Rate = 0.04 +/- 0.002

[Mon May 20 17:25:52 2013] Off-axis axis estimate = 6.90'
[Mon May 20 17:28:52 2013] Using EEF radius (= 9.88 ")to estimate initial spatial extent for simple fitting
[Mon May 20 17:28:52 2013] Initial guess for spatial extent in simple fitting = 9.88"
[Mon May 20 17:28:52 2013] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.172
[Mon May 20 17:28:52 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 9.88"
[Mon May 20 18:26:19 2013] fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_src5.ximg exists
[Mon May 20 18:26:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_src5.csv
[Mon May 20 18:26:19 2013] fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon May 20 18:26:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_src5.csv
[Mon May 20 18:26:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 18:26:19 2013] fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon May 20 18:26:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src5.csv
[Mon May 20 18:26:19 2013] fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon May 20 18:26:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src5.csv
[Mon May 20 18:26:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500070701_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 20:46:23 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 11.708024 pixels away
[Mon May 20 20:46:23 2013] Vigneting correction estimate = 1.000000
[Mon May 20 20:46:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 20:46:23 2013] Assessing source extent using major
[Mon May 20 20:46:23 2013] Source does appear to be extended
[Mon May 20 20:46:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 20:46:46 2013] Using EEF radius (= 9.88 ")to estimate initial spatial extent for simple fitting
[Mon May 20 20:46:46 2013] Initial guess for spatial extent in simple fitting = 9.88"
[Mon May 20 20:46:46 2013] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.172
[Mon May 20 20:46:46 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 9.88"
[Mon May 20 21:34:57 2013] fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_src5.ximg exists
[Mon May 20 21:34:57 2013] fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon May 20 21:34:57 2013] Fit fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_src5 appears to have run properly
[Mon May 20 21:34:57 2013] fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon May 20 21:34:57 2013] fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon May 20 21:34:57 2013] Fit fullrun_pn_xmm0500070701_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue May 21 00:01:22 2013] Spatial fit model total counts = 883.315000, observed total counts = 815.000000
[Tue May 21 00:01:22 2013] Offset between fit and detection position for source 5 = 0.136263 pixels
[Tue May 21 00:01:22 2013] 899.823000 total counts/ 530.057000 bgd. counts: snr = 16.060745
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.136263 pixels
  Position = (311.7, 204.3) = 12 1 46.74 -18 56 43.2
  Extent = 6.1 (5.4-6.9)" x 4.4 (3.8-5.1)", rotation angle = 342 (325-356) degrees
  Source counts = 369.8 +/- 30.0
  Background counts = 530.1
  Rate = 0.02 +/- 0.001
[Tue May 21 00:01:22 2013] Vigneting correction estimate = 1.000000
[Tue May 21 00:01:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 00:01:22 2013] Assessing source extent using major axis lower bound
[Tue May 21 00:01:22 2013] Source does appear to be extended
[Tue May 21 00:01:22 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.06
[Tue May 21 00:01:59 2013] XMMSAS src. selection expression = ellipse(27071.066800, 17724.008400, 366.756611, 263.160008, 342.318500, X, Y)
[Tue May 21 00:01:59 2013] Writing source region out to fullrun_pn_xmm0500070701_pi300-10000_pass1_cl_src5_src.reg
[Tue May 21 00:01:59 2013] Extracting stamp from image fullrun_pn_xmm0500070701_pi300-10000_cl_sm2.00.img.gz, (291, 183) - (333, 225)
[Tue May 21 00:01:59 2013] XMMSAS bgd. selection expression = annulus(27071.066800, 17724.008400, 611.261018, 1222.522035, X, Y) && !ellipse(26160.531000, 18770.736800, 476.738414, 397.116811, 359.822602, X, Y)
[Tue May 21 00:01:59 2013] Writing fullrun_pn_xmm0500070701_pi300-10000_pass1_cl_src5.gif
[Tue May 21 00:14:46 2013] Mean detx,y = (1208.85, -6483.25) 
[Tue May 21 00:14:51 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 21 00:15:14 2013] Binned source spectrum to 10 counts/bin
[Tue May 21 00:15:15 2013] Setting source spectrum file to fullrun_pn_xmm0500070701_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue May 21 00:15:15 2013] Setting bgd. spectrum file to fullrun_pn_xmm0500070701_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue May 21 04:57:42 2013] Updating aperture counts using extracted products
[Tue May 21 04:57:42 2013] Total counts from fullrun_pn_xmm0500070701_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 456.00
[Tue May 21 04:57:42 2013] Total counts from fullrun_pn_xmm0500070701_pi300-10000_pass1_cl_src5_bgd.pi.gz = 557.00
[Tue May 21 04:57:42 2013] Got source and background scale factors 307200.000000, 2919261.000000
[Tue May 21 04:57:42 2013] User source parameters:
  Position = (311.7, 204.3) = 12 1 46.74 -18 56 43.2
  Extent = 6.1 (5.4-6.9)" x 4.4 (3.8-5.1)", rotation angle = 342 (325-356) degrees
  Source aperture counts = 397.4 +/- 22.4
  Background aperture counts = 58.6
  Rate = 0.02 +/- 0.001

[Tue May 21 04:57:52 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 04:57:52 2013] Using photon index=1.80, rate=0.0159, arf fullrun_pn_xmm0500070701_pi300-10000_pass1_cl_src5.arf
[Tue May 21 04:57:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 04:57:52 2013] Updating source flux to 7.3e-14
[Tue May 21 04:58:44 2013] xmm0500070701/analysis//spectral/fullrun_pn_xmm0500070701_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete